45235 BW Wireless Monitor INSTALLATION INSTRUCTIONS
Congratulations on your purchase of the JASCO™ Wireless Camera system(45235 Wireless monitor) All JASCO™ Wireless Cameras includes high quality video and audio components. The 45235 BW Wireless monitor System is a combined wireless camera and video monitor/ receiver. The 45235 BW Wireless monitor surveillance system is an ideal combination for monitoring the porch, watching the yard, pool, pets or the baby. It is also suited to many small business applications.
❑ Wireless Camera ❑ Monitor ❑ Fixing kit ❑ 1 x 9V Camera Adapter ❑ 1 x 13.5V Monitor SETUP INSTRUCTIONS Camera Transmitter 1. Unpack the Camera/ Transmitter 2. Decide on wall or desk/table mounting the camera. If wall mounting there is a useful drilling guide on the back cover of these instructions. The camera can be adjusted for both by rotating the camera head to the required position. 3. Decide whether to connect using AC power or battery (not included).
The Camera/Transmitter installation is now complete. Monitor/ Receiver 1. Unpack the Monitor/Receiver. 2. Plug the monitor power adapter into the power jack and plug the power adapter into any AC power outlet. Turn on the monitor by pressing front push button. Alternatively remove the battery compartment lid on the underside of the unit and install 10 x C type batteries (not included). 3. The Monitor/ Receiver installation is now complete.
The most common source of interference are microwave ovens and mobile phones. Try to avoid mounting the Monitor/Receiver near a microwave oven or other source of RF interference such as cordless phones. Sound detecting on monitor Monitor has a sound detecting function, when the sound level from cameras is great than presetting level on monitor, an audio alert will sound on the monitor. The volume control for the alert is on the rear of the monitor.
the “Auto” LED indicator will turn green. When the sound from cameras is great than monitor’s presetting level, an audio alert will sound; you need to check which camera was triggered by the sound. To avoid searching empty channels, which do not have a camera connected, make sure the slide switch on the rear of the Monitor/Receiver has the corresponding switch in the correct position for each camera. Example shows a 2-camera installation.
TROUBLE SHOOTING If you are having trouble operating this product, please consult the guide below: SYMPTOM No camera picture Blank monitor Interference on camera picture Audio problems REMEDIES 1. Check all connectors. Make sure camera(s) and receiver are switched ON. 2. Ensure camera(s) and receiver are set to correct channel(s). 3. Make sure camera is within range of receiver. 1. Make sure receiver is switched ON. 2. If using AC adapter, make sure it is plugged in. 3.
Operating Temperature Output -10oC to +40oC Audio/Video Humidity Less than 85% Current Consumption Approx. 800 mA Overall Size 5.7” W x 7.28” H x 8.46” D WARRANTY This product has a one year manufacturer’s warranty which covers parts and labor only. In the unlikely event that you encounter a problem, the unit should be returned to Customer Care, FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.