Digital Wireless Camera and Lcd Monitor User Manual
TABLE OF CONTENTS PRODUCT FEATURES 1. LCD Portable Color Monitor/Receiver 2. Wireless Color Camera PACKAGE CONTENTS OVERVIEW 1. Wireless Color Monitor 2. On-‐Screen Display 3. Wireless Color Camera INITIAL SETUP 1. Wireless Color Camera 2. Wireless Color Monitor OPERATION 1. Viewing Modes 2. Auto Detection 3. Auto Recording 4.
15. Activating the Overwrite Feature 16. Lullabies 17. Mini USB Output TROUBLESHOOTING 1.
Congratulations on your purchase of the Digital Wireless Portable LCD Monitor/Receiver with DVR system. Please review these instructions carefully before attempting to operate the unit. PRODUCT FEATURES: LCD Portable Color Monitor/Receiver • 2.
(FIGURE DISPLAYING CONTENTS) OVERVIEW: Wireless Color Monitor/Receiver REWIND&(when&viewing&recorded&videos) LEFT&(navigating&the&menu) AUTO&RECORD& MODE&INDICATOR AUDIO&LEVEL& FROM&CAMERA& VISUAL& INDICATOR POWER&LED&(low&battery&if&flashing) MICROPHONE MENU&(used&to&access&most&of&the&advanced& opt
PLAY/STOP)(remotely)plays/stops)musical) tunes)from)each)camera NEXT)(remotely)skips)songs)while)playing) musical)tunes)from)each)camera) TALK)BACK)BUTTON)(speak)to)currently) selected)camera)channel) POWER)ON/OFF)SWITCH REMOVABLE)MICRO)SD)CARD)SLOT A&(activates&automatic&recording&when&video& motion&or&a
On-‐Screen Display TEMPERATURE%READING% NEAR%SELECTED%CAMERA CAMERA%CHANNEL% CURRENTLY%VIEWING RECEPTION%QUALITY%(full% strength%shown) MEMORY% CARD%INSERTED FLASHING%YELLOW:%new% video%saved%to%memory% (resets%when%power%is% turnedPoff) RED:%memory%card%full CURRENTLY%DISPLAYED% MONITOR%ZOOM%LEVEL Wireless Color Camera INFRARED(LEDs((night( ANTENN
SENSITIVITY'DIAL'(adjust'the'camera' sensitivity'of'audio'being'detected) VOLUME'DIAL'(adjusts'sound'level'from' monitor) POWER&SWITCH REAR'PAIRING'BUTTON'(used'to'pair' camera'to'monitor) 3/AXIS&SWIVEL&MOUNT POWER&LED CHARGING'LIGHT'(illuminates'when' optional'battery'pack'is'charging) INITIAL SET-‐UP: Wireless Color Camera Power Using AC Adapter 1.
Power Using AA Batteries 1. Locate the rear battery compartment underneath the base of the camera. 2. Push the tab towards the batteries to release cover, as shown: (FIGURE DISPLAYING BATT COMPARTMENT TAB) 3. Insert the batteries as shown: (FIGURE DISPLAYING BATTS BEING INSERTED) Wireless Color Monitor: 1.
CHARGING(LIGHT NOTE: Depending on the current state of these battery, it can take up to 6 hours to fully charge. 4. Locate the POWER switch on the left side of the monitor. POWER&ON/OFF&SWITCH 5. Slide the POWER switch to the ON position.
NOTE: A flashing POWER LED indicates a low battery. Depending on the current state, it can take up to 6 hours to fully charge. 6. The monitor will automatically scan for the camera. If within range, it will display on the screen.
NOTES: • Extending the antenna is recommended for optimal reception. Locate the ANTENNA RELEASE SWITCH on top of the monitor. Slide the switch to unlock icon. Take care not to force the antenna beyond its maximum position.
OPERATION: Viewing Modes 1. Manual (Single) View individual camera continuously a. Press and release the MANUAL button. Press and release to toggle from one camera to another (if additional cameras are paired to monitor) 2. Sequential (Scan) View each paired camera every 7-‐seconds a.
SENSITIVITY(DIAL((adjust(the(camera( sensitivity(of(audio(being(detected) Turn the dial completely down to disable audio detection. Adjust/Disable Video Sensitivity 1. Press and release the MENU button on the monitor. [4] 2. Using the directional keypad, highlight the ‘Record’ option. Press and release the OK button. [5] 3.
NOTES: • Before recording, it’s recommended to change the date and time settings (Additional Features p.XX). This will help locate recorded videos more easily during playback. • A Micro SD card is required (not included). • When activated, only the AUTO DET button is functional. Activate 1.
Adjust/Disable Video Sensitivity 1. Press and release the MENU button on the monitor. [13] 2. Using the directional keypad, highlight the ‘Record’ option. Press and release the OK button. [14] 3. Using the directional keypad, highlight the ‘VMD Sensitivity’ option. Press and release the OK button. [15] 4.
1. In either single or sequential viewing mode, press the OK button. [21] 2. A list of folders stored on the memory card will appear on the screen. [22] Use the directional keypad to select the folder named, ‘VIDEO’ and press and release the OK button. [24] 3.
ADDITIONAL FEATURES: Setting the Date and Time 1. Press and release the MENU button on the monitor. [27] 2. Using the directional keypad, highlight the ‘Setup’ option. [28] Press and release the OK button. 3. Press and release the OK button to select ‘Date & Time’ 4. Use the directional keypad to adjust the values displayed. 5.
Night Light 1. Press and release the NIGHT LIGHT button on top of the camera to manually turn on/off. NIGHT&LIGHT&(manual&button& turns&on/off) 2. Can also be controlled remotely using the monitor.
4. Using the directional keypad, highlight the ‘Paring’ option. [25] Press and release the OK button. [26] 5. Using the directional keypad, highlight the channel number desired. [27] You can also overwrite cameras already assigned a channel number. Press and release the OK button to save. [28] 6.
Auto Mute Mutes monitor speaker until audio is detected by camera. Speaker transmits audio from camera for approximately 7 seconds after camera no longer detects audio. Can be triggered for an indefinite period of time. Activate/Adjust/Deactivate 1. Press and release the MENU button on the monitor. [45] 2.
Adjusting the Brightness 1. Press and release the MENU button on the monitor. [64] 2. Using the directional keypad, highlight the ‘Settings’ option. [65] Press and release the OK button. [66] 3. Use the directional keypad to highlight ‘Brightness’. [67] Press and release the OK button. [68] 4.
5. Press and release the MENU button to exit. [88] Adjusting the Zoom Level 1. Press and release the MENU button on the monitor. [90] 2. Using the directional keypad, highlight the ‘Settings’ option. [91] Press and release the OK button. [92] 3. Using the directional keypad, highlight the ‘Zoom’ option.
1. Press and release the MENU button on the monitor. [115] 2. Using the directional keypad, highlight the ‘Record’ option. [116] Press and release the OK button. [117] 3. Using the directional keypad, highlight the ‘Trigger Record’ option. [118] Press and release the OK button. [119] 4.
TROUBLESHOOTING: If you are having trouble operating this product, please consult the Frequently Asked Questions below. Frequently Asked Questions: 1. ‘OUT OF RANGE’ appears on the display, camera is already paired, and camera is next to the monitor. Try sliding the monitor POWER SWITCH to the OFF position and then back to ON.
replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.
