Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping Safety Precautions • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children or infants to play with it. • This video monitor is not a substitute for responsible adult supervision. • Test the video monitor before use. Become familiar with its functions. • Keep the cords out of reach from children and infants.
Product Includes..............................3 Monitor Overview...........................3 Camera Overview...........................4 Getting Started ...............................6 Optional - Mounting the Camera............... 7 Using the Cable Clips .............................. 9 Using Your Baby Monitor ..............10 Adjusting Volume .................................. 10 Changing Channels............................... 11 Talking to Your Baby .............................. 11 Using Digital Zoom.
Restoring Default Settings ....................... 29 Remotely Connecting to Your Cameras .......................................31 Using Audio / Video Out ...............32 Pairing Additional Cameras ..........34 Technical Specifications .................36 Fixed Camera ...................................... 36 P/T Camera ......................................... 36 3.5” Monitor ........................................ 36 4.3” Monitor ........................................ 36 Unit Dimensions ..........
x1* x1* x1* OR Pan/Tilt (P/T) Camera Fixed Camera x1* Mounting Kit Power Adapter x1* x3* Cable Clips ENGLISH Product Includes P/T Mounting Plate (for P/T camera only) x1 x1 Power Adapter Monitor *See product packaging for exact contents Monitor Overview Talk Power / Sound LED’s* Zoom Switch channel Enter / exit menu Joystick Speaker Stand Reset button Battery compartment *Power / Sound LED’s on the left side of the 3.
LEFT microSD slot Volume controls RIGHT Play / stop Next sound sounds Charging indicator Lock mode Quad view / Scan mode TOP Power port AV out port Mini USB port Power / video on /off Antenna Night light Start / stop recording Snapshot BOTTOM Wi-Fi Cradle connector* *Wi-Fi Cradle not included. See “Remotely Connecting to Your Cameras” on page 31 for details.
Volume dial Power indicator P/T Camera (BB3500 Series) Light sensor Infrared LED’s Lens Microphone Speaker Temperature sensor Antenna Power port Ceiling mount switch Power button Volume dial 5 Pairing button ENGLISH Power switch
Getting Started 1 Connect the power adapter to the camera. Fixed camera P/T camera Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. 2 Slide the power switch to ON or press and hold the power button. Power switch Power button 3 4 Connect the power adapter to the monitor. Press and hold the power button on top of the monitor for 3 seconds. The display turns on.
Before permanently mounting the camera: • Determine where you will get the best view of your baby. • Ensure the power cable is long enough to power the camera. • Test your camera(s) before mounting permanently. ENGLISH Optional - Mounting the Camera Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. See “Using the Cable Clips” on page 9 for installation details.
P/T Camera 1 If wall mounting: Drill 2 holes in the wall with centers exactly 26mm apart. If ceiling mounting: Hold the included P/T mounting plate against the ceiling. Use a pencil to mark the centres of the 3 mounting slots. Drill holes where you have marked NOTE: Make sure that the lone mounting slot points toward the viewing area. Viewing area 2 Tap anchors into holes with a hammer. Insert screws 2/3 of the way.
Thread the extra cable through the cable clip notches. Option 2 Thread the extra cable through the cable clip notches. Wrap the excess cable around the clip. Option 3 Wrap the excess cable around the clip. Tips t It is recommended to charge the battery for 5 hours before use. t The charge LED glows red while the monitor is charging and glows green when charging is complete. t For overnight monitoring, it is recommended to connect the power adapter.
Using Your Baby Monitor The monitor shows the following icons during use: Icon Icon Meaning REC Signal strength microSD card inserted Selected channel File overwrite enabled Recording New pictures or videos Volume muted Battery full Digital zoom activated X2 Meaning Battery low Song currently playing Battery charging Talk feature activated 68°F Touch buttons locked Current room temperature Out Camera out of of range or off.
Press to cycle through connected cameras. ENGLISH Changing Channels The currently selected camera is shown on screen. The monitor only plays sound from the camera that is currently being viewed. To connect additional cameras to the monitor, see “Pairing Additional Cameras” on page 34. Talking to Your Baby Press and to talk hold to the selected camera Using Digital Zoom 1 Press on the monitor to zoom in. A X2 icon appears on the screen. X2 Press 2 Move the joystick to adjust the zoom area.
Locking the Monitor Press the Lock button ( ) on the side of the monitor to disable the touch buttons on the front of the monitor. A lock icon ( ) appears on the monitor. Use this function to keep from pressing touch buttons by accident. Press Press the Lock button ( touch buttons. ) again to re-enable Video Off Mode (Audio Only Mode) Video Off mode is a power-saving function which turns the monitor’s display off while continuing to play audio from the camera(s).
1 Orient the microSD card as shown below and insert it into the microSD slot. ENGLISH To insert a microSD card: microSD card slot 2 Push the microSD card in until it clicks into place. You can now save recorded video and snapshots from your camera(s) on your monitor. See “Using Playback Mode” on page 25 for details on viewing and managing video and picture files. Video Recording You can save recorded video from a single camera or all cameras connected to your system.
Taking Snapshots The snapshot feature allows you to capture images from a single camera channel in normal viewing mode or all 4 channels in Quad mode. Snapshot images are saved to the microSD card (not included). To take a snapshot: Press the Snapshot button ( ) on top of the monitor to save a picture of your monitor’s display. Snapshot button A new file icon ( ) appears on the screen. For viewing and managing snapshots, see “Using Playback Mode” on page 25.
The camera can play 5 different pre-loaded Sleep & Soothe sounds. To play sounds: 1 ENGLISH Playing Sleep & Soothe Sounds Press the button on the side of the monitor to play sound on the currently selected camera. Press A icon with the number of the currently playing sound (1-5) appears in the bottomleft corner of the monitor. 1 2 Press the button on the side of the monitor to play the next sound in sequence. Press 3 Press the sounds.
Using Quad and Scan View Mode If you have multiple cameras, Quad view mode and Scan view mode help you keep an eye on them. Scan view mode Use Scan mode to display video from each camera connected to your system in full-screen for 3 seconds before switching to the next camera. 1 From normal viewing mode, press once to activate Scan mode. The monitor will begin displaying connected video channels in sequence. Press 2 Press mode.
1 Press to launch the main menu. ENGLISH Using the Main Menu Press 2 Move the joystick to adjust menu options. Press the joystick to make a selection. again to exit the main menu. Press Press again to exit menus Move joystick to adjust menu options. Press to make a selection. Setting the Date and Time 1 Press , then select Settings.
3 Move the joystick left and right to switch between fields. Move the joystick up and down to adjust the date and time. NOTE: Video monitor uses 24-hour time. 4 Push the joystick in to save changes. 5 Press repeatedly to get back to normal viewing mode. Adjusting Camera Brightness 1 Press , then select Setup. Select Setup 2 Select Brightness 3 Adjust the brightness level by moving the joystick left and right.
You may choose to record video at a low or high quality depending on your recording needs. To adjust video quality: 1 Press ENGLISH Configuring Recording Options , then select Recording. Select Recording 2 Select Video Quality 3 Select High for clearer video or Low for smaller file size. Configuring Recording Options You can configure your system to overwrite old video files to make way for new recordings. To configure file overwriting: 1 Press , then select Recording.
2 Select File Overwrite 3 Select Yes to enable file overwriting or No to disable. Changing Languages This baby monitor supports 3 languages: English, French, and Spanish. To change languages: 1 Press , then select Settings.
Move the joystick up and down to switch between languages. Press the joystick to select a language. ENGLISH 3 Configuring Alarm Volume You can set the volume of the alarm used by the timer and temperature alert functions. 1 Press , then select Alarm. Select Alarm 2 Select Alarm Volume 3 Move the joystick left and right to adjust the volume of the alarm.
Temperature Alerts The temperature alert feature allows you to ensure the baby’s room is at a comfortable and safe temperature. The monitor beeps if the temperature gets too hot or cold. Temperature sensor is accurate within 3°F/1°C. You can control the high and low temperatures that trigger alerts or disable temperature alerts. To select temperature units: 1 Press , then select Settings. Select Settings 2 Select Temp.
Select Temp. Alert Range 3 ENGLISH 2 Move the joystick up and down to change your selection. Move the joystick left and right to adjust the high and low temperatures that trigger alerts. Adjust high and low temperatures 4 Select On to activate temperature alerts.
Using the Timer You can set the monitor to sound an alarm after a preset period of time to help you stay aware of feeding and nap times. 1 Press , then select Alarm. Select Alarm 2 Select Timer 3 Move the joystick left and right to switch between hours and minutes. Move the joystick up and down to adjust timer duration. Adjust timer duration 4 Push the joystick in when you have finished setting the timer. 5 Select On to start the timer or Off to cancel.
1 Press ENGLISH To enable motion tracking: , then select Setup. Select Setup 2 Select Motion Tracking On/Off r 3 Move the joystick up and down to change the channel you are configuring. Move the joystick right or left to toggle motion tracking on and off. Select On or Off Choose channel NOTE: You may use the joystick to override the automatic movement of your P/T camera when motion tracking is activated.
2 Move the joystick up and down to select the VIDEO or PICTURE folder. Press the joystick to select a folder. VIDEO PICTURE 3 Move the joystick up and down to choose the date you wish to playback. Earliest pictures and videos are shown first. Push the joystick in to select a folder. The folders are named by the year, month, and date. For example, a folder named 02042013 means that the folder was created in 2013, February (02), on the 4th.
Double-click the VIDEO folder, then select the sub-folder you want to open. ENGLISH 4 NOTE: The folders are named by the year, month, and date. For example, a folder named 02042013 means that the folder was created in 2013, February (02), on the 4th. 5 Double-click the desired video file to begin playback. To back up picture / video files on Mac: 1 Remove the memory card.
2 Move the joystick up and down to toggle between files or folders. VIDEO PICTURE X 3 Highlight the file or folder you wish to delete. Move the joystick to the right to highlight the red “X“ and push the joystick in. NOTE: The VIDEO folder cannot be deleted. 4 Select Yes to delete the chosen file or folder or No to cancel. Delete? Yes No Formatting Memory Card The format function permanently erases all saved picture and video files on the microSD card (not included).
Select Format Memory Card ENGLISH 2 3 Select Yes Using Power Saving Mode Power save mode is a battery-conserving function that shuts off the monitor’s LCD display if no sound is detected by your camera(s) for 2 minutes. When sound is detected, the display turns back on. To enable power saving mode: 1 Press , then select Power Save. Select Power Save 2 Select On to activate power saving mode or or select Off to cancel.
Restoring Default Settings Restoring your video monitor returns any setting changes to default settings. NOTE: Restoring to default settings will not delete saved video and picture files. To restore to default settings: 1 Press , then select Settings.
The Wi-Fi Cradle accessory allows you to connect to your cameras from anywhere (model #: ACCWIFI1, not included). Use the Wi-Fi Cradle to: t Connect to your cameras from anywhere using your mobile phone (iOS & Android) or computer (PC & Mac). t Remotely connect to your system without disrupting live viewing mode on your monitor. t Provide a secure, password-protected feed for accessing your camera(s) remotely. FPO - will be picture of Wifi Cradle .
Using Audio / Video Out For large screen viewing, you can connect the video monitor to your television (RCA only) using an optional 3.5mm to RCA adapter (model #: ACCAVOUT1). To view files on a television: Power on the television you will use to 1 view the baby monitor’s display. 2 Connect the 3.5mm end of the adapter to the monitor’s A/V out port. Connect 3.5mm end 3 Connect the RCA ends of the adapter to audio and video inputs on your television.
Select Default Settings 3 Select NTSC (North America) or PAL (UK/Europe) and by pushing the joystick. FPO 3.5” to RCA adapter 3.
Pairing Additional Cameras The camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# BB311AC1 / BB351AC1), OR if your monitor and camera are not paired up, follow the steps below. To pair a camera to your monitor: 1 2 Place the camera and monitor next to each other. Make sure the camera is turned on and plugged in. Press , then move the joystick left or right to select SETUP.
Press the PAIR button on the back of the fixed camera or the bottom of the P/T camera within 30 seconds of selecting the pairing channel. Press PAIR Press PAIR Live video from the camera is immediately shown on the monitor once the camera is successfully paired. Notes • Immediately move the camera away from the monitor to avoid speaker feedback. • The monitor can connect up to 4 cameras. • The monitor can be used with a combination of fixed and P/T cameras.
Technical Specifications Fixed Camera Frequency 2.4GHz - 2.48GHz Maximum Range Up to 450ft / 137m outdoors* Up to 150ft / 46m indoors* Image Sensor 1/6” Color Image Sensor Lens 4.9mm F2.8 IR LED 8 pcs Power Adapter 5.0V DC 1000mA Weight 0.2lbs / 0.1kg P/T Camera Frequency 2.4GHz - 2.48GHz Maximum Range Up to 450ft / 137m outdoors* Up to 150ft / 46m indoors* Image Sensor 1/6” Color Image Sensor Lens 3.0mm F2.8 IR LED 10 pcs Power Adapter 5.0V DC 1000mA Weight 0.6lbs / 0.3kg 3.
Fixed Camera 2.4in 60mm 2.9in 73mm 3.9in 99mm 3.9in 99mm 5.9in 149mm P/T Camera 5.9in 149mm 3.5” Monitor 5.4in 137mm 1.1in 28mm 5.4in 137mm 1.1in 28mm 3.2in 81mm 4.3” Monitor 3.
Troubleshooting Problem No video displayed on the monitor Solution t Press and hold the button for 3 seconds to power on the monitor. t Monitor is out of batteries. Plug in the monitor power adapter. t Video Off mode is on. Press any button to turn the screen back on. t Power save mode is on. Press any button to turn the screen back on. t If none of the solutions above work, press the Reset button on the back of the monitor. Monitor screen keeps turning off t The monitor battery is low.
Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping Clean the monitor and camera with a slightly damp cloth or an antistatic cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth.
USER’S GUIDE
Edited with the trial version of Foxit Advanced PDF Editor To remove this notice, visit: www.foxitsoftware.com/shopping ! WARNING STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from cribs, bassinets, play yards and other safe sleep environments for infants. NOTICES FCC Notice: This device complies with Part 15 of FCC Rules.