User's Manual

ManualsBrandsRDI Technology ManualsCamera & PhotoWIRELESS PAN AND TILT CAMERA

Congratulations on your purchase of CMS5270----the 7.0 Inch Wireless Monitoring System with

OSD menu. The system consists of a 7.0” wireless monitor and a wireless color camera, an ideal

product for watching the baby, elder or patient. It is also suited for small business applications.

Features///

1). 900MHz wireless technology, 7.0-inch LCD for good picture display

2). Manual switch wired and wireless camera via pressing the button “Source”.

3). Supports up to 3 cameras and each camera’s motion can be armed or disarmed independently.

4). Friendly menu can adjust the alarm volume, contrast, brightness, color and tint.

5). LCD monitor can work with 3 modes: Scan, Auto & Manual

6). Selectable screen ratio of 4:3(std), 16:9(DVD movie) and extended 4:3.

7). Mirror function for vehicle rear view camera.

8). Up/down reverse function when monitor is installed upside down.

9). Optional rechargeable battery pack for both camera and monitor portable use.

10). LCD monitor can be wall or table mounting.

System Contents///

Identify all parts before proceeding with installation.

Things to Consider before Installation/// for best performance, follow these simple guidelines:

*The camera should be aimed accordingly to optimize viewing area. *For best transmission, avoid

installations where there are thick walls or major obstructions between the camera & LCD

monitor.

Installing the Camera (Transmitter)///

1. Unpack the Camera.

2. The Pan&Tilt camera can only stand on desktop. So attach the camera to stand as shown. The

camera can be adjusted by rotating the camera head to the required position.

3. Use the camera power adaptor, connect power jack to the rear of the tabletop base. Make sure

the camera is within reach of an AC power outlet. Once it’s connected with the adaptor, the

camera will rotate one cycle.

4. After the camera rotate one cycle, press “Privacy” button, the lens will rotate to the lowest

position.

5. Select the camera operating channel on the DIP switch on the bottom panel by moving switches

1, 2 to the down position. Switch is preset to channel 1. 4. After the camera rotate one cycle, press

Summary of content (6 pages)

PAGE 1
Congratulations on your purchase of CMS5270----the 7.0 Inch Wireless Monitoring System with OSD menu. The system consists of a 7.0” wireless monitor and a wireless color camera, an ideal product for watching the baby, elder or patient. It is also suited for small business applications. Features/// 1). 900MHz wireless technology, 7.0-inch LCD for good picture display 2). Manual switch wired and wireless camera via pressing the button “Source”. 3).
PAGE 2
“Privacy” button, the lens will rotate to the lowest position. IMPORTANT: In order to access the DIP switch in the bottom of the camera, you need to reverse the camera and turn to the bottom. 6. The Camera (Transmitter) installation is now complete. Night vision/// The Camera includes IR LEDs, which allows viewing in the dark when used with the adapter. It can automatically turn on night vision in low light. Installing the LCD Monitor/// 1. Unpack the LCD monitor. 2.
PAGE 3
scanning. Pressing the Manual or Auto button will cancel this mode. Auto Pressing the Auto button places the system in Auto mode. In this mode, the system automatically rotates through all active cameras. When a camera detects motion, the LCD monitor will display the picture from the camera for a few seconds, and the beeper will sound.
PAGE 4
Interference on Camera picture Audio Problems Symptom No Camera picture Blank Monitor Interference on Camera picture Audio Problems Symptom No Camera picture Blank Monitor Interference on Camera picture 3. Make sure rechargeable battery is charged. 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, monitor or both to improve the reception quality. 3.
PAGE 5
900MHz frequency. Specification/// Camera (Transmitter): TV System PAL/NTSC standard Image Sensor 1/3" CMOS Integrated Lens 5.6mm, F2.0 fixed focus Resolution 360 horizontal TV lines Signal/Noise Ratio 48db Frequency Range 910, 920MHZ Weather proof Indoor Mini. Illumination 0.1Lux Current Consumption 200mA Modulation FM PIR Range & Angle 6m,90° Overall size 2.36"(W) x 2.76"(H) x3.
PAGE 6
Approvals/// This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.