Features ·Digital Wireless Technology Provides Excellent Image Quality and Clarity ·Interference Free, secure and private signal. ·Up to 300ft Wireless Transmission Range* ·Listen in with Exceptional Sound Clarity ·Two-way Audio *Maximum open space transmission range. The actual range is dependent upon building materials and other obstructions in path of wireless signal. Receiver Features ·2.
Getting Started The system comes with the following components: 1x Wireless Receiver 1x Receiver Cradle 1x Power Adapter for Receiver 1x Wireless Camera 1x Power Adapter for Camera Check your package to confirm that you have received the complete system, including all components shown above.
Wireless Receiver Front Controls 1. Receiver Antenna-Receives & Sends signals from or to the Camera. 2. Power /Low Power Indicator-The left Green LED indicates the Receiver Power is ON or OFF. The Red LED’s flash to indicate the power is low. 3. LCD Screen-Displays video from the Camera. 4. P/S Button-When the P/S button is pressed, the LCD Screen is turned off. The P/S feature can be used for the following two reasons: (1) To prevent the user from being disturbed (i.e.
Side Controls 11. Alarm +/-Button-Press to increase or decrease the volume of the audio alarm. 12. Power Button-Slide to turn the Receiver ON or OFF. 13. DC 5V Power Input-Connect the included DC5V Power Adapter to power the receiver and/or charge the Receiver battery (When the receiver is not in the Cradle). Receiver Cradle Inputs 14. DC 5V Power Input –Connect the DC 5V Power Adapter (included) to the Receiver Cradle to power the receiver and/or charge the Receiver (when docked).
3. Microphone-Receives sounds for the area near the camera, and transmits sound from the Camera to the Receiver. 4. Speaker-Produces the sound transmitted from the receiver. 5. PAIR Button-The pairing button is located on the back of the camera behind the stand mount 6. DC 9V Power-Connect the DC 9V Power Adaptor to the Camera. NOTE: The camera can also be powered by the optional rechargeable battery pack. If the camera is plugged in with the AC adapter, the battery pack will not be used.
Sound Trigger When the sound detected by the camera is above preset level*, the monitor will be triggered to alarm. This will happen in two circumstances, 1) the monitor is in P/S mode, 2) the monitor is in MUTE** mode. *The level is preset by manufacturer, can not be adjusted by users. **When the sound detected by camera is under a preset level(preset by manufacturer only, a very low level), the monitor will shut down the speaker so that you won’t get disturbed by environmental noise. This is MUTE mode.
Viewing Mode 1. SIGNAL INDICATOR-The signal indicator shows the strength of the signal being received from the camera. The number of bars in the Signal Indicator shows the strength of the signal-One or No Bars indicates the signal is poor, and 4 bars indicate a very strong signal. 2. Talk Indicator-Press Talk button in viewing Mode, this indicator will show up, then you can talk. 3. Night vision indicator-when the Night vision of camera turns on, it will show up.
4. A message will be displayed on the Receiver screen. The Receiver will count down from 30~0-you must press the PAIR button on the Camera during this time to successfully pair the Camera. If the button on the Camera is not pressed, the Receiver will return to the view screen, and no pairing will take place. 5 .Press the PAIR button on the back of the Camera Once the camera has been paired, it will be immediately viewable on the Receiver Monitor.
Specifications Receiver Receiving Frequency Range 2.405GHz~2.470GHz Data Rate 4 Mbps Receiving Sensitivity -81dBm Demodulation Type GFSK with FHSS Resolution H: 480 V: 240 Viewing Angle H: 50° V: 50° A/V Output / Resolution QVGA 320x240 / 25FPS Alarm Sensitivity 80dB ±10% (1M) Power Requirement 5V DC ±5% Power Consumption 400mA Max without charging, 800mA with charging Operating Temp Range 14°F ~ 140°F / -10℃ ~ 60℃ Operating Humidity 10% ~ 85% RH Camera Transmit Frequency Range 2.405GHz~2.
FCC/IC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT.