INDOOR/OUTDOOR WIRELESS CAMERA SYSTEM USINCLUDES: VIDEO/AUDIO CAMERA TRANSMITTER & MONITOR/USB RECEIVER CR1122 USER’S GUIDE
Congratulations on your purchase of the 900MHz Wireless Color Bullet MicroCam. The system consists of a wireless A/V&USB receiver and a wireless MicroCam, an ideal product for application of covert monitoring, such as the porch, watching the yard, pool, pets or the baby. It is also suited to many small business. .
• Power adaptor • Adaptor cable • Hardware kit • Manual x2 x1 x1 x1 THINGS TO CONSIDER BEFORE INSTALLATION For best performance, follow these simple guidelines: • Camera(s) should be installed between 8 and 13 feet above the area to be monitored • The Camera should be aimed accordingly to optimize viewing area • For best transmission, avoid installations where there are thick walls or major obstructions between the Camera and Receiver INSTALLING THE CAMERA (TRANSMITTER) 1. Unpack the Camera. 2.
After finish setting the channel, screw the lens cover on. 5. The Camera (Transmitter) installation is now complete. Night Vision/// The Camera includes IR LEDs, which allows viewing up to 12 feet in the dark when used with the adapter. It can automatically turn to night vision in low light. SETTING UP THE RECEIVER 1.
switch from one camera to the next either manually or automatically via button on the top panel of the receiver. MANUAL MODE To select one of the three channels manually, press the MANUAL button on the panel of the receiver. The receiver will switch to a different channel (CAM1, CAM2) each time when the MANUAL button is pressed.
channel(s). 3. Make sure camera is within range of receiver. Blank monitor Interference on camera picture Audio problems 1. Make sure receiver is switched ON. 2. If using AC adapter, make sure it is plugged in. 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, receiver or both to improve the reception quality. 3. If a camera is positioned close to the receiver, point antenna away from the receiver. 4.
910, 920MHz APPROVALS/// This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
DRIL L HO L E S IN THIS TWO P O S ITIO N DRIL L HO L E IN THIS P O S ITIO N 7
