User guide

ManualsBrandsRCA ManualsRemote ControlsRCRPS04GR

English

1. Install batteries ........................................2

Battery Saver ...........................................2

2. Program the remote ...............................3

Brand Code Search .................................3

Direct Code Entry ....................................6

Auto Code Search ...................................7

Manual Code Search ..............................9

3. Program Your Preset Channels ............12

Tour of the Remote ...................................15

Advanced Functions .................................16

Master Power ........................................16

Reassigning the AUDIO•AUX or

DVD•VCR Key ........................................17

Volume Punch-Through .......................17

Channel Lock .........................................19

Code Retrieval .......................................19

Learning .................................................21

Macros ................................................... 23

Troubleshooting ........................................26

Limited Lifetime Warranty .......................28

Español

1. Instalación de Baterías .........................29

Ahorrador de Baterías ..........................29

2. Programe su Control Remoto .............30

Búsqueda de Código de Marca ...........30

Entrada de Código Directo ..................33

Búsqueda de Código Automática ........35

Código de Búsqueda Manual .............38

3. Programe sus Canales de

Preselección ..........................................40

Tour del Control Remoto ..........................43

Funciones Avanzadas ..............................45

Control Maestro (Master Power) .........45

Reassigning the AUDIO•AUX or

DVD•VCR Key ........................................46

Traspaso de Control de Volumen

(Volume Punch-Through) .....................47

Bloqueo de Canal .................................48

Recuperación de Código .....................49

Aprendizaje ..........................................50

Macros ................................................... 53

Solución de problemas ...........................56

Limited Lifetime Warranty .......................58

RCRPS04GR

Owners Manual

Manual del usuario

Summary of content (28 pages)

PAGE 1
RCRPS04GR Owners Manual Manual del usuario English 1. Install batteries........................................2 Battery Saver...........................................2 2. Program the remote ...............................3 Brand Code Search .................................3 Direct Code Entry ....................................6 Auto Code Search ...................................7 Manual Code Search ..............................9 3. Program Your Preset Channels............12 Tour of the Remote ......
PAGE 2
1. Install batteries Your universal remote requires two AAA alkaline batteries (not included). To install the batteries: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the (+) and (–) marks inside the battery compartment. 3. Push the battery cover back into place. Battery Precautions: • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
PAGE 3
2. Program the remote • The Brand Code Search searches through the codes for select brands of devices. If your brand is listed in the Brand Code section of the code list, try this method first. • The Direct Code Entry searches through the codes for select brands of devices. Note: Direct Code Entry is usually the best method to use for audio devices. • The Auto Code Search goes automatically through all the codes for the device you’re trying to control.
PAGE 4
1. Manually turn on the device you want to control. 2. Find your device’s brand in the Brand Code list section of the accompanying code list. Circle the number for your brand and keep the list handy. Lists / Code codes/ Liste desCódigos Lista de ming using the Brand Code List Guide.
PAGE 5
NOTES: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control. ENGLISH Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information.
PAGE 6
Direct Code Entry Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. TIPS: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•STREAM for satellite receivers, digital TV converters, cable boxes, and streaming media players, DVD•VCR for DVD players, and AUDIO•AUX for audio receivers. To program the AUDIO•AUX or DVD•VCR key for a different type of device, see the Reassigning the AUDIO•AUX or DVD•VCR Key section.
PAGE 7
ENGLISH NOTES: Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code in the list. Remember to enter the code for future reference in the box provided in the Code Retrieval section of this manual. If your brand isn’t listed in the code list, use one of the Code Search methods to program the remote control. (Refer to the Auto and Manual Code Search methods.
PAGE 8
3. Wait until the POWER key comes on and stays on. Then release both keys. 4. Point the remote directly at the front panel of the device you want to control. Press SLOW on the remote and wait 5 seconds. The remote is sending a batch of 10 codes on your device. Did your device turn off? YES: Go to step 5. NO: Press SLOW again. The remote sends the next batch of 10 codes. Keep pressing SLOW every 5 seconds until your device turns off. 5.
PAGE 9
The search times out after two minutes (the POWER key blinks four times and the last programmed code under that device key is retained). ENGLISH The POWER key blinks four times when the remote has gone through all the codes. The remote exits the Auto Code Search. If your device hasn’t turned off yet, try a different search method. Testing the Code for Maximum Functionality 1. Try a variety of the device’s functions with the remote.
PAGE 10
1. Manually turn on the device you want to control. 2. Press and hold the device key you want to program (the POWER key illuminates). While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time (the POWER key turns off). 3. Wait until the remote’s POWER key comes on and stays on. Then release both keys. 4. Point the remote directly at the front panel of the device you want to control. Press SKIP FWD on the remote and wait 2 seconds.
PAGE 11
NOTES: Throughout the programming of each key, keep the remote pointed at the device you are programming the remote to control. During the Manual Code Search, the remote ignores keypresses that aren’t part of the search. The search times out after two minutes (the POWER key blinks four times and the last programmed code under that device key is retained). The POWER key blinks four times when the remote has gone through all the codes. The remote exits the Manual Code Search.
PAGE 12
3. Program Your Preset Channels This remote control gives you access to up to 10 of your favorite satellite/cable and TV channels instantly, using the Preset Keys. For example, if one of your favorite channels is ESPN, you can set up this remote to take you directly to that channel when you press the P key followed by the 1 key. To use the Preset Channels feature, first you must program the channel you’d like to use for each Preset key.
PAGE 13
To program your Preset Channels: Press and hold the P key. The Power key illuminates. Continue to hold for three seconds until you see a blink of the Power key LED. The light remains illuminated and now you can release the P key. 2. Press the 1 key to program your first preset channel. The POWER key flashes once and stays on. 3. Press the device key listed for this channel (TV or SAT•CBL•STREAM). ENGLISH 1.
PAGE 14
Preset Programming Notes • To quit programming preset channels at any time, press the EXIT•BACK key. The POWER key flashes 4 times. No changes to the Preset keys are made. • When you’re programming presets, the remote gives you a maximum of 15 seconds between key presses before it leaves programming mode and goes back to normal operation. The POWER key flashes 4 times—this means the remote has not saved your programmed presets and you’ll have to start again.
PAGE 15
Tour of the Remote ENGLISH In most cases, the keys on this remote perform the same functions as the keys on your original remotes once you’ve programmed this remote to operate your components. Many keys on this remote have other functions as well. Illuminated POWER key serves as an indicator light to provide feedback. Device keys (TV, SAT•CBL•STREAM, DVD•VCR, AUDIO•AUX) put the remote in the right mode to control your device.
PAGE 16
IMPORTANT: Because this remote controls more than one device, you must first “tell” the remote which device you wish to operate. That means, if you wish to operate your TV, you must first press the TV key to put the remote in the TV Mode. The remote stays in that device mode until you press a different device key. For example, if your remote is in TV Mode and you want to operate the DVD player, you must press the DVD key to change device modes.
PAGE 17
To enable Master Power again: 1. Press and hold the P key for 3 seconds. The POWER key comes on. 2. Press VOL+ to enable Master Power again. 3. Press the P key to confirm. The Master Power function is enabled again. ENGLISH Reassigning the AUDIO•AUX or DVD•VCR Key The AUDIO•AUX key defaults to control an audio receiver, and the DVD•VCR key defaults to control a DVD player.
PAGE 18
Advanced Punch-Through Volume punch-through as described above occurs automatically. Advanced punch-through lets you specify one device for all volume commands for each non-audio mode (SAT•CBL•STREAM, AUDIO•AUX if programmed for a non-audio device, or DVD•VCR). You can specify either the TV or AUDIO device. 1. Press and hold the device key whose volume commands you want to send to the TV or audio device. The POWER key turns on. 2. While holding down the device key, press and hold the VOL + key.
PAGE 19
Channel Lock To turn channel lock on: 1. Press and hold the device key for the device you use to change channels. While you’re holding down this device key, use your other hand to press and hold the remote’s CH + key at the same time. 2. Wait until the remote’s POWER key comes on and stays on. Then release both keys. 3. Press OK•ENTER to lock channel commands to this device. To turn channel lock off: 1. Press and hold the TV key.
PAGE 20
TIPS: All TV codes start with the number 1; all VCR and DVR codes start with the number 2; all DVD player codes, the number 3; all audio device codes, the number 4; and all satellite receiver, cable box, and digital TV converters, the number 5. To exit the Code Retrieval Mode at any time, press the EXIT•BACK key. If you press an invalid key during the Code Retrieval process, the remote will not respond.
PAGE 21
Learning * Some learned signals require more memory than others. In these cases, fewer key commands can be learned. Before First-Time Learning Before you start learning keys for the first time, clear any stored learning information that might be in the remote. This lets you begin with a clean slate. 1. Press and hold the EXIT•BACK key (the POWER key illuminates). While you’re holding down the EXIT•BACK key, use your other hand to press and hold the POWER key (the POWER key illumination turns off). 2.
PAGE 22
3. Wait until the POWER key turns on and stays on. Then release both keys. The remote is now in Learning mode. 4. On the learning remote, press the key you want to use for the learned function. The illuminated POWER key blinks once, then remains on. 5. On the original remote, press and hold the key you want to teach to the universal remote. Wait until the POWER key on the learning remote blinks once, then release the key on the original remote. The learning remote has finished learning this key.
PAGE 23
Macros ENGLISH The Macro feature lets you execute a sequence of commands with one keypress. Any sequence of commands that you regularly perform (up to a maximum of 15 per macro) can be stored as a Macro under one of the 1–8 number keys (up to 6 macros). Programming a Macro Important: Before you start, make sure your remote is programmed to control your devices and that you’ve learned all the keys you want to learn from your original remotes. 1.
PAGE 24
Notes: To exit Macro programming at any time, press the EXIT•BACK key. The POWER key blinks four times, then turns off. No changes are made to existing Macros. If you press a key that has a Learned function, the Learned function is assigned to the Macro sequence. If you program all 15 keys into a Macro, the Macro is automatically saved after the 15th keypress. The commands within a Macro must be programmed in sequential order. A delay of 0.
PAGE 25
Deleting a Macro Press and hold the MACRO key until the POWER key turns on and remains on. 2. Press the EXIT•BACK key. The POWER key blinks once, then remains on. 3. Press the number key (1–8) where the macro you want to delete is stored. The POWER key blinks once, then remains on. 4. Press the OK / ENTER key to confirm the Macro Clear operation. The POWER key stays on for 2 seconds, then turns off. The selected Macro is deleted.
PAGE 26
Troubleshooting Problem: The remote does not operate your device. • Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR, AUDIO•AUX). This tells the remote which device to operate. • Remove any obstacles between the remote and the device. Make sure you’re aiming the remote at the device’s IR sensor. • Make sure the batteries are fresh and are properly installed.
PAGE 27
Problem: The remote will not change channels on device. Make sure the remote is in the correct mode by pressing the corresponding device key (TV, SAT•CBL•STREAM, DVD•VCR, AUDIO•AUX). This tells the remote which device to operate. • Press the OK / ENTER key after you enter a channel number. • Remove any obstacles between the remote and the device. Make sure to aim the remote at the IR sensor on the device. Problem: The device’s menu does not appear on the TV screen.
PAGE 28
Limited Lifetime Warranty Audiovox Accessories Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.