User's Manual

User Manual
Transmitter features
5-CH,6-CH ,7-CH transmitter features:
1.The panel is easy to operate with mutistage electricity indication.
2.The shape design accords with the ergonomics.
3.The DIP switches are available for various servos. It can perform the flight
Actions such as ascending,descending,forward,backward,leftward,rightward and so on.
4.7-channel micro-computer as t he encoder, PPM& PCM modulation,output power:
≤100mw,
current drain:about 300mA, ,power source: 4.8~6V Ni-Mh battery.
5.Free to switch between left-hand and right-hand throttles.
Control identification and function:
MODE1
1． Left stick/Rudder. It controls your airplane/helicopter forward,backward,and right. Push up to
fly your airplane/helicopter forward, pull down to fly backward, push leftward to fly left,and
push rightward to fly right.
2． Right s tick/Throttle. It controls y our a irplane/helicopter asc ending,descending,left moving
and right moving,Push up to ascend your airplane/helicopter,pull down to fly backward,push
leftward to fly left,and push rightward to right.
MODEL 2
1. Left sti ck/Throttle. It c ontrols y our air plane/helicopter asce nding,descending,left and rig ht.
Push up to ascend your airplane/helicopter, pull down to descend,pull leftward to fly left, and
push rightward to fly right.
2. Right st ick/Rudder. It co ntrols you r ai rplane/helicopter fo rward,backward,left m oving and
right moving . Push up to fly your airplane/helicopter forward,pull down to fly backward,push
leftward to move your airplane/helicopter left,push rightward to move right.
FCC warning statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.