User Manual

Razer Orochi_MultiSku_MasterGuide
Rev: 090603
Open Size : 204mm x 81mm with customed diecut
Diecut : Razer Blade box
Printing : 2C x 2C (Grayscale & Pantone 802C),
: Only Page 10 - 3C (Grayscale +
Pantone 802C + Pantone Red 032C)
Pages : 36 pages
Material : (Cover) 230 gsm woodfree paper + blind emboss logo
(Contents) 105 gsm artpaper with matt varnish
Finishing : Trim & fold to size 102mm x 81mm
Binding : Saddle-stitch
IMPORTANT NOTE: Printer are require to paginate and product films accordingly to the page number as shown on FA.
MASTER GUIDE
www.razerzone.com | 3
2 | For Gamers. by Gamers.
™
www.razerzone.com | 76 | For Gamers. by Gamers.
™
www.razerzone.com | 98 | For Gamers. by Gamers.
™
www.razerzone.com | 5
4 | For Gamers. by Gamers.
™
www.razerzone.com | 11
10 | For Gamers. by Gamers.
™
www.razerzone.com | 13
12 | For Gamers. by Gamers.
™
www.razerzone.com | 15
14 | For Gamers. by Gamers.
™
www.razerzone.com | 17
16 | For Gamers. by Gamers.
™
www.razerzone.com | 19
18 | For Gamers. by Gamers.
™
www.razerzone.com | 21
20 | For Gamers. by Gamers.
™
www.razerzone.com | 23
22 | For Gamers. by Gamers.
™
www.razerzone.com | 25
24 | For Gamers. by Gamers.
™
www.razerzone.com | 27
26 | For Gamers. by Gamers.
™
www.razerzone.com | 29
28 | For Gamers. by Gamers.
™
www.razerzone.com | 31
30 | For Gamers. by Gamers.
™
www.razerzone.com | 33
32 | For Gamers. by Gamers.
™
www.razerzone.com | 35
34 | For Gamers. by Gamers.
™
36 | For Gamers. by Gamers.
™
contents
02 Introduction
03 Message from Razerguy
04 Driver Installation
05 Battery / Pairing Indicator Behavior
06 Configuring your Razer Orochi
20 Using your Razer Orochi
24 Safety and Maintenance
27 Legalese
29 FCC Information
34 WEEE Information
The Razer Orochi™ brings mobile gaming mouse standards to new heights
with its small form factor and bleeding-edge technology. Equipped with a
gaming-grade laser sensor and dual mode wired/wireless functionality, the
Razer Orochi uses gaming optimized Bluetooth® technology to address
your need for portability and ease of use with a wired mode option for
gaming grade performance.
Gaming on the go is now possible.
using your razer orochi
SETTING SENSITIVITY
STAGES
A sensitivity stage is a
preset sensitivity value you
can swap to on the fly. This
means you can change to
your preferred sensitivity
instantly by toggling
between sensitivity stages.
To preset a sensitivity
stage:
1. Load the Razer
Configurator and click
on the “Adjust
Performance” tab.
2. Click on the “Sensitivity
Stage” button. A
Sensitivity Stage
Settings pop up box will
appear.
3. Select the number
of sensitivity
stages needed.
4. Click on the stage
you would like to
preset and adjust
using the arrow on
the slider below.
5. Click “Apply” when
done. To switch
between different
sensitivity stages,
simply assign the
Sensitivity Stage
Up and Sensitivity
Stage Down
functions to the
desired buttons.
CREATING MACROS
A. Load the Razer
Configurator and click
on the “Manage
Macros” tab.
B. Click “Record” to start
creating a macro.
C. Type in the desired
sequence of
keystrokes, then click
“Stop” to end the
recording.
D. Right-click on the
recorded keystroke to
access more options.
E. You can also insert
additional commands
by clicking on the
“Advanced” button.
F. Click “Apply” when
done.
ON-THE-FLY SENSITIVITY
On-The-Fly Sensitivity is a feature that allows you to fine-tune your sensitivity settings
even in the midst of gameplay. If On-The-Fly Sensitivity has been assigned to a button,
pressing that assigned button and moving the scroll wheel will produce a bar at the
lower right-hand corner of your screen. While this feature allows you to dynamically
adjust your sensitivity settings, it is accessible only if the driver is installed.
Note:
On screen display of On-The-Fly Sensitivity is only available in Wired Mode.
weee inFormation
ENGLISH
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of
its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local government office, for details of where and how they can
take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product should not be mixed with other commercial wastes for disposal.
FRANÇAIS
Comment éliminer ce produit (déchets d’équipements électriques et électroniques)
(Applicable dans les pays de l’Union Européen et aux autres pays européens disposant de systémes de collecte sélective)
Ce symbole sur le produit ou sa documentation indique qu’il ne doit pas être éliminé en fin de vie avec les autres déchets ménagers.
L’élimination incontrôlée des déchets pouvant porter préjudice à l’environnement ou à la santé humaine, veuillez le séparer des autres
types de déchets et le recycler de façon responsable. Vous favoriserez ainsi la réutilisation durable des ressources matérielles. Les
particuliers sont invités à contacter le distributeur leur ayant vendu le produit ou à se renseigner auprès de leur mairie pour savoir où et
comment ils peuvent se débarrasser de ce produit afin qu’il soit recyclé en respectant l’environnement. Les entreprises sont invitées à
contacter leurs fournisseurs et à consulter les conditions de leur contrat de vente. Ce produit ne doit pas être éliminé avec les autres
déchets commerciaux.
ITALIANO
Corretto smaltimento del prodotto (rifiuti elettrici ed elettronici)
(Applicabile in i paesi dell’Unione Europea e in quelli con sistema di raccolta differenziata)
Il marchio riportato sul prodotto o sulla sua documentazione indica che il prodotto non deve essere smaltito con altri rifiuti domestici al
termine del ciclo di vita. Per evitare eventuali danni all'ambiente o alla salute causati dall'inopportuno smaltimento dei rifiuti, si invita
l'utente a separare questo prodotto da altri tipi di rifiuti e di riciclarlo in maniera responsabile per favorire il riutilizzo sostenibile delle
risorse materiali. Gli utenti domestici sono invitati a contattare il rivenditore presso il quale è stato acquistato il prodotto o l'ufficio
locale preposto per tutte le informazioni relative alla raccolta differenziata e al riciclaggio per questo tipo di prodotto. Gli utenti
aziendali sono invitati a contattare il proprio fornitore e verificare i termini e le condizioni del contratto di acquisto. Questo prodotto non
deve essere smaltito unitamente ad altri rifiuti commerciali.
DEUTSCH
Korrekte Entsorgung dieses Produkts (Elektromüll)
(Anzuwenden in den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem)
Die Kennzeichnung auf dem Produkt bzw. auf der dazugehörigen Literatur gibt an, dass es nach seiner Lebensdauer nicht zusammen
mit dem normalen Haushaltsmüll entsorgt werden darf. Entsorgen Sie dieses Gerät bitte getrennt von anderen Abfällen, um der
Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu schaden. Recyceln Sie das Gerät, um die
nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern. Private Nutzer sollten den Händler, bei dem das Produkt
gekauft wurde, oder die zuständigen Behörden kontaktieren, um in Erfahrung zu bringen, wie sie das Gerät auf umweltfreundliche
Weise recyceln können. Gewerbliche Nutzer sollten sich an Ihren Lieferanten wenden und die Bedingungen des Verkaufsvertrags
konsultieren. Dieses Produkt darf nicht zusammen mit anderem Gewerbemüll entsorgt werden.
ESPAÑOL
Eliminación correcta de este producto (material eléctrico y electrónico de descarte)
(Aplicable en la Unión Europea y en países europeos con sistenmas de recogida selectiva de residuos)
La presencia de esta marca en el producto o en el material informativo que lo acompaña, indica que al finalizar su vida útil no deberá
eliminarse junto con otros residuos domésticos. Para evitar los posibles daños al medio ambiente o a la salud humana que representa
la eliminación incontrolada de residuos, separe este producto de otros tipos de residuos y recíclelo correctamente para promover la
reutilización sostenible de recursos materiales. Los usuarios particulares pueden contactar con el establecimiento donde adquirieron
el producto, o con las autoridades locales pertinentes, para informarse sobre cómo y dónde pueden llevarlo para que sea sometido a
un reciclaje ecológico y seguro. Los usuarios comerciales pueden contactar con su proveedor y consultar las condiciones del contrato
de compra. Este producto no debe eliminarse mezclado con otros residuos comerciales.
PORTUGUÊS
Eliminação Correcta Deste Produto (Resíduo de Equipamentos Eléctricos e Electrónicos)
Esta marca, apresentada no produto ou na sua literatura indica que ele não deverá ser eliminado juntamente com os resíduos
domésticos indiferenciados no final do seu período de vida útil. Para impedir danos ao ambiente e à saúde humana causados pela
eliminação incontrolada de resíduos deverá separar este equipamento de outros tipos de resíduos e reciclá-lo de forma responsável,
para promover uma reutilização sustentável dos recursos materiais. Os utilizadores domésticos deverão contactar ou o
estabelecimento onde adquiriram este produto ou as entidades oficiais locais para obterem informações sobre onde e de que forma
podem levar este produto para permitir efectuar uma reciclagem segura em termos ambientais. Os utilizadores profissionais deverão
contactar o seu fornecedor e consultar os termos e condições do contrato de compra. Este produto não deverá ser misturado com
outros resíduos comerciais para eliminação.
DANSK
Korrekt affaldsbortskaffelse af dette produkt (elektrisk & elektronisk udstyr)
Mærket på dette produkt eller i den medfølgende dokumentation betyder, at produktet ikke må bortskaffes sammen med almindeligt
husholdningsaffald efter endt levetid. For at undgå skadelige miljø- eller sundhedspåvirkninger på grund af ukontrolleret
affaldsbortskaffelse skal dette produkt bortskaffes særskilt fra andet affald og indleveres behørigt til fremme for bæredygtig
materialegenvinding. Hjemmebrugere bedes kontakte forhandleren, hvor de har købt produktet, eller den lokale myndighed for oplysning
om, hvor og hvordan de kan indlevere produktet med henblik på miljøforsvarlig genvinding. Erhvervsbrugere bedes kontakte leverandøren
og læse betingelserne og vilkårene i købekontrakten. Dette produkt bør ikke bortskaffes sammen med andet erhvervsaffald.
POLSKI
Prawidowe usuwanie produktu (Zużyty sprzęt elektryczny i elektroniczny)
Oznaczenie umieszczone na produkcie lub w odnoszących się do niego tekstach wskazuje, ×e produktu po up ywie okresu u×ytkowania nie
nale×y usuwać z innymi odpadami pochodzącymi z gospodarstw domowych. Aby uniknąć szkodliwego wpływu na środowisko naturalne i
zdrowie ludzi wskutek niekontrolowanego usuwania odpadów, prosimy o oddzielenie produktu od innego typu odpadów orazodpowiedzialny
recykling w celu promowania ponownego u×ycia zasobów materialnych jako staej praktyki. W celu uzyskania informacji na temat miejsca i
sposobu bezpiecznego dla śdowiska recyklingu tegoproduktu u×ytkownicy w gospodarstwach domowych powinni skontaktowa ć się z
punktem sprzeda×y detalicznej, w którym dokonali zakupu produktu, lubz organem wadz lokalnych. U×ytkownicy w firmach powinni
skontaktowa ć się ze swoim dostawcà i sprawdzić warunki umowy zakupu. Produktu nie nale×y usuwać razem z innymi odpadami
komercyjnymi.
GREEK
messaGe From razerGuy
The age of the mobile gaming has arrived. Thanks to the evil geniuses at
Razer- gaming on the go is now a reality with the new Razer Orochi.
Named after a mythical serpent in Japanese mythology, the Razer Orochi is
equipped with a state of the art gaming-grade sensor and a wired/wireless
hybrid system. The Razer Orochi gives you gaming grade performance in
wired mode with the convenience and freedom of movement in wireless
mode via Bluetooth® technology.
If you like fragging anytime, anywhere – as much as we do – you’re now free
to do so with the Razer Orochi.
battery / pairing indicator behavior
The Razer Orochi has a battery indicator on its top cover, which displays
the status of battery life. While in pairing mode, the indicator will be
blinking in green.
BATTERY INDICATOR BEHAVIOR
safety and maintenance
SAFETY GUIDELINES
In order to achieve maximum safety while using
your mouse, we suggest that you adopt the
following guidelines:
1. Avoid looking directly into the laser beam of
your mouse or pointing the beam in any one
else’s eye. Note that the laser beam is NOT
visible to the naked human eye and is set on an
always-on mode.
2. Should you have trouble operating the mouse
properly and troubleshooting does not work,
unplug the device and contact the Razer
hotline or go to www.razerzone.com for
support. Do not attempt to service or fix the
device yourself at any time.
3. Do not take apart the mouse (doing so will also
void your warranty) and do not attempt to
service it yourself or operate it under
abnormal current loads.
4. Keep your mouse away from liquid, humidity or
moisture. Operate your mouse only within the
specified temperature range of 0˚C(32˚F) to
40˚C(104˚F). Should you operate it in a
temperature that is beyond this range,
unplugand switch off the device in order to let
Q < 25 µJ in 100 mm
tp < 320 µs
850 nm < � < 865 nm
IEC 60 825-1 2001-08
INVISIBLE LASER RADIATION
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
bluetooth laser gaming mouse
bluetooth laser gaming mouse
17.7 +- 1mm
51 +- 1mm 51 +- 1mm
17.7 +- 1mm
driver installation
Windows XP / x64 / Vista / Vista64 installation instructions
Step 1: Download the Driver Installer from http://www.razersupport.com/
Step 2: Unzip the file and run the installer.
Step 3: The Razer Orochi setup screen appears. Click NEXT.
Step 4: Read the license agreement. Click YES if you accept all terms
of the agreement.
Step 5: Enter your information. Click NEXT.
Step 6: Choose your installation setup. Click NEXT.
Step 7: If everything is correct. Click INSTALL to begin installation.
Step 8: At the end of the installation, click FINISH to complete the
installation.
Step 9: Follow the instructions onscreen to restart your computer.
Click Yes.
100% Battery Blue lit LED
30% Battery Red lit LED
10% Battery Red blinking LED
Bluetooth pairing mode Blue blinking LED
configuring your razer orochi
IMPORTANT NOTE:
Configuration of the Razer Orochi can only be performed in Wired Mode.
It is not possible to configure it in Wireless Mode.
RAZER SYNAPSE™ ONBOARD FUNCTIONS
All settings will be saved on the profile selected and will apply on another computer
even without the Razer Configurator installed.
(Note: On-The-Fly Sensitivity requires the Razer Orochi driver to be installed)
ASSIGN BUTTONS TAB
In the Assign Buttons tab, you can assign various functions to each of the buttons
based on your own preferences.
The following functions are possible:
CLICK
Perform a normal mouse click.
MENU
Open a context-sensitive menu.
UNIVERSAL SCROLLING
Activate universal scrolling by clicking and holding the assigned button. Drag your
Razer Orochi to scroll in the direction of the mouse movement.
DOUBLE CLICK
Perform a double click with the assigned button.
MACRO
If the button function or key is not listed, or if you would like to assign a macro to a
button, select “Macro” from the dropdown menu. In addition, all saved macros will be
shown on a sub dropdown menu for quick selection when you mouse over the
“Macro”option.
PROFILE SETTINGS
Switch to a profile on the fly and immediately load all your preferred mouse settings.
When you select “Profile Settings” from the dropdown menu, a sub-menu will appear
and allow you to choose desired profile to switch to.
FORWARD
Assign a “Forward” command in Windows Explorer / Internet Explorer.
BACKWARD
Assign a “Back” command in Windows Explorer / Internet Explorer.
ON-THE-FLY SENSITIVITY
Enable change of sensitivity settings on the fly without the need to enter the
configuration menu.
SINGLE KEY
Activate a key on your keyboard.
SCROLL UP
Scroll up the page you are currently viewing.
SCROLL DOWN
Scroll down the page you are currently viewing.
BUTTON OFF
Disable any function on the assigned button.
ADJUST PERFORMANCE TAB
CURRENT SENSITIVITY
Sensitivity is how much your cursor moves on the screen in relation to your physical
movement of the mouse. A higher sensitivity value would translate to less physical
movement of the mouse, and vice versa.
In the ADJUST PERFORMANCE tab, the current sensitivity of your Razer Orochi in dots
per inch (DPI) is indicated and can be easily adjusted by moving the arrow along the
slider in steps of 125DPI and up to 4000DPI.
Note:
In Wireless mode, the maximum sensitivity of Razer Orochi is limited to 2000DPI.
For greater flexibility in adjustment, you can select the “Enable independent X-Y
sensitivity” option and move the individual X and Y arrows along the slider. Note: the
Independent X-Y sensitivity feature is not available in Wireless mode
To display the On-The-Fly Sensitivity indicator onscreen whenever you make changes
on the fly, select the “Enable On-The-Fly sensitivity on-screen display” option.
the temperature stabilize within the optimal
temperature range.
COMFORT
Here are some tips to ensure that you are
comfortable while using your mouse. Research
has shown that long periods of repetitive motion,
improper positioning of your computer
peripherals, incorrect body position, and poor
habits may be associated with physical
discomfort and injury to nerves, tendons, and
muscles. Please follow these guidelines to
ensure comfortable use of your mouse and avoid
injury.
1. Position your keyboard and monitor directly in
front of you with your mouse next to it. Place
your elbows next to your side, not too far away
and your mouse within easy reach.
2. Adjust the height of your chair and table so
that the keyboard and mouse are at or below
elbow height.
3. Keep your feet well supported, posture straight
and your shoulders relaxed.
4. During gameplay, relax your wrist and keep it
straight. If you do the same tasks with your
hands repeatedly, try not to bend, extend or
twist your hands for long periods.
5. Do not rest your wrists on hard surfaces for
long periods. Use a wrist support such as
Razer’s gel-filled eXactRest™ to support your
wrist while gaming.
6. Customize the buttons on your mouse to suit
your style of gaming in order to minimize
repetitive or awkward motions while gaming.
7. Make sure that your mouse fits comfortably in
your hands.
8. Do not sit in the same position all day. Get up,
step away from your desk and do exercises to
stretch your arms, shoulders, neck and legs.
9. If you should experience any physical
discomfort while using your mouse, such as
pain, numbness, or tingling in your hands,
wrists, elbows, shoulders, neck or back, please
consult a qualified medical doctor immediately.
MAINTENANCE AND USE
The Razer Orochi is equipped with a laser sensor,
which has a tracking beam that is invisible to the
naked human eye. There is a little regular
maintenance to keep the Razer Orochi in
optimum condition. Once a month we recommend
you unplug the mouse from the USB port and
clean the lens below the Razer Orochi with a soft
cloth or cotton swab. Use a little warm water but
no soap or harsh cleaning agents.
To get the ultimate experience in movement and
control, we highly recommend a premium
mousing surface from Razer. Some surfaces will
cause undue wear on the feet requiring constant
care and eventual replacement.
Do note that the sensor of the Razer Orochi is
‘tuned’ or optimized especially for the Razer
mousing surfaces. This means that the sensor
has been tested extensively to confirm that the
Razer Orochi reads and tracks best on Razer
mousing surfaces. Other premium mousing
surfaces from companies like Everglide™ may
work just as well.
BATTERY WARNING
Caution: risk of explosion and personal injury if
batteries are replaced by incorrect type. Do not
open, mutilate, or expose to conducting materials
(metal), moisture, liquid, fire, or heat. Doing so
may cause batteries to leak or explode, resulting
in personal injury. Dispose of spent, leaking or
damaged batteries according to manufacturer
instructions and local laws. Do not use or charge
batteries (lithium-polymer rechargeables) if
leaking, discolored, or deformed. Do not mix
battery types. Do not charge alkaline batteries.
Do not leave rechargeable batteries discharged
or unused for extended periods. Battery life
varies with usage. When replacing, remove all
spent batteries, and do not mix old batteries with
new. When device is not in used for extended
periods, remove batteries to avoid leakage and
store away from children in a cool, dry place at
room temperature.
CLASS 1M LASER PRODUCTS
International standards and safety. INVISIBLE
LASER RADIATION: DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS. Class 1m laser products
comply with International Standard IEC 60825-1
Ed 2: 2007, Class 1M Laser Product Invisible and
also complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007.
SAFETY AND USAGE GUIDELINES FOR
LASER PRODUCTS
Do not direct laser beam toward eye. For Class
1M laser products, viewing laser output with
optical instruments (e.g., eye loupes, magnifiers,
and microscopes) within a distance of 100mm
may posed an eye hazard.
legalese
COPYRIGHT INFORMATION
©2009 Razer USA Ltd. All Rights Reserved. Razer
™, the Razer Triple-Headed Snake logo, the
Razer distressed word logo, Orochi™ and other
trademarks contained herein are the property of
Razer USA Ltd and/or its affiliated or associated
companies, registered in the United States or
other countries. All other trademarks are the
property of their respective owners. Actual
product may differ from pictures.
Razer™ assumes no responsibility for any errors
that may appear in this software, manual or help
file. Information contained herein is subject to
change without notice.
Razer™ may have patents, patent applications,
trademarks, copyrights, trade secrets or other
property rights, intellectual and otherwise
concerning the product and subject matter in this
manual and software. Except as is provided in any
written license agreement provided by Razer™,
furnishing of this manual does not give you a
license to any such patents, trademarks,
copyrights or other intellectual property rights,
whether registered or otherwise. Patent Pending.
SOFTWARE LICENSE AGREEMENT
(‘AGREEMENT’)
Razer™ IS WILLING TO LICENSE THE ENCLOSED
SOFTWARE TO YOU ONLY ON THE CONDITION
THAT YOU ACCEPT ALL OF THE TERMS
CONTAINED IN THIS LICENSE AGREEMENT. This
is a legal agreement between you (either an
individual end-user, corporate entity or any other
entity whatsoever) and Razer™. By installing,
uploading, copying or utilizing in any way the
software, you are agreeing to be bound by the
terms and conditions of this Agreement. If you do
not agree to the terms of this Agreement, do not
install the software and promptly return the
software package and other items that are part of
this product in their original package with your
payment receipt to your point of purchase for a
full refund.
GRANT OF LICENSE
Razer™ grants you a non-exclusive, revocable
license to use one copy of the enclosed software
program, licensed and not sold to you,
("Software") on one computer only with the Razer
™ product you have purchased. No other rights
are granted. The Software is in use if it is
installed, including but not limited to loaded on
the computer's permanent or temporary
memory. For backup purposes only, you may
make one copy of the Software for your own use.
You must include on the backup copy all copyright
and other notices included in the Software as
supplied by Razer™. Installation on a network
server for the sole purpose of your internal
distribution of the Software is permitted only if
you have purchased an individual Software
package or concurrent dedicated license for each
networked computer to which the Software is
distributed.
RESTRICTIONS
Razer™ retains full ownership of the Software.
You shall not directly and/or indirectly attempt to
decompile, disassemble, reverse-engineer, or
modify the Software licensed to you in any way
except as allowed by law. You may not transmit
the Software over a network (except as expressly
permitted above) or electronically using any
means. You may not directly and/or indirectly
transfer the Software except upon a permanent
transfer of the enclosed Razer™ product provided
that all Software updates are included in the
transfer, you do not retain a copy of the Software,
and the transferee agrees to be bound by the
terms and conditions in this license. Upon any
violation of any of the provisions of the
Agreement, your rights to use the software shall
automatically terminate and all copies of the
Software must be returned to Razer™ or
destroyed.
LIMITATION OF LIABILITY
The warranties set forth in this agreement
replace and/or supersede all other warranties
and your remedies for breach of warranty are
expressly limited to those herein set forth. Razer
™ expressly disclaims all other warranties to the
extent allowed by law including, but not limited
to, the implied warranties of merchantability,
fitness for a particular purpose and
non-infringement of third-party rights with
respect to the documentation, software (including
patches and/or updates) and hardware. No Razer
™ supplier, dealer, agent, or employee is
authorized to make any modification, extension or
alteration of the warranty or to substitute
products or services, lost profits, loss of
information or data, or any other special, indirect,
consequential or incidental damages arising in
any way out of the distribution of, sale of, resale
of, use of, or inability to use any product or
software subject to warranty herein set forth. In
no event will Razer™ be liable for any special,
incidental, indirect or consequential damages
whatsoever.
COSTS OF PROCUREMENT PRODUCT OR
SERVICE
For the avoidance of doubt, in no event will Razer
™ be liable for any costs of procurement unless it
has been advised of the possibility of such
damages, and in no case shall Razer™ be liable
for any costs of procurements liability exceeding
the actual money paid for the products subject to
warranty at issue.
In the event some jurisdictions do not allow the
limitation of implied warranties or liability for
incidental, consequential, special, or indirect
damages, the above limitation may not apply. The
above limitations will not apply in case of
personal injury where and to the extent that
applicable laws require such liability.
U.S. GOVERNMENT RESTRICTED RIGHTS
The Software is provided to the U.S. government
only with restricted rights and limited rights. Use,
duplication, or disclosure by the U.S. Government
is subject to restrictions set forth in 48
C.F.R. 2.101 (October 1995), consisting of
'"Commercial Computer Software" and
'Commercial Computer Software Documentation
as such terms are used in 48C.F.R. 12.212
(September 1995), and in FAR Sections 52-227-14
and 52-227-19 r DFARS Section 52-227-7013 ©(1)
(ii), or their successors, as applicable. Consistent
with 48 C.F.R. 12.512 and 48 C.F.R. 227-7202-1
through 27-7204-4 (June 1995), or any successor
regulations, this Software is provided to U.S.
Government users pursuant to the terms and
conditions herein.
fcc declaration of
conformance
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio TV
technician for help.
For more information, refer to the online help
system on www.razerzone.com.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. End users must follow the specific
operating instructions for satisfying RF exposure
compliance.
This transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter.
Industry Canada Compliance Statement
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
This device complies with RSS-210 of Industry
Canada.
Operation is subject to the following two
conditions:
1) this device may not cause interference, and
2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Cet équipement a été déclaré conforme à la
norme CNR-210 édictée par Industrie Canada.
Son fonctionnement est soumis aux conditions
suivantes:
1) l'équipement concerné ne doit pas causer
d'interférences, et
2) il doit accepter toute interference reçue, y
compris les interférences risquant d'engendrer
un fonctionnement indésirable.
Singapore IDA Certification
fcc caution statement of compliance with eu directive
ENGLISH
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Razer (Europe) GmbH, declares that this Razer Orochi™
Bluetooth Laser Gaming Mouse is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
FRANÇAIS
DÉCLARATION DE CONFORMITÉ AVEC LES DIRECTIVES DE L'UNION EUROPÉENNE
Par la présente Razer (Europe) GmbH déclare que l'appareil Razer Orochi™
Bluetooth Laser Gaming Mouse est conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
ITALIAN
DICHIARAZIONE DI CONFORMITA’ CON LE DIRETTIVE EU
Con la presente Razer (Europe) GmbH dichiara che questo Razer Orochi™
Bluetooth Laser Gaming Mouse è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
DEUTSCH
EG-KONFORMITÄTSERKLÄRUNG
Hiermit erklärt Razer (Europe) GmbH, dass sich dieser/diese/dieses Razer Orochi™ Bluetooth Laser
Gaming Mouse in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten
Vorschriften der Richtlinie 1999/5/EG befindet.
ESPAÑOL
DECLARACIÓN DE CONFORMIDAD CON LA DIRECTIVA DE LA UE
Por medio de la presente Razer (Europe) GmbH declara que el Razer Orochi™
Bluetooth Laser Gaming Mouse cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
PORTUGUÊS
DIRECTIVA DA UE COM DECLARAÇÃO DE CONFORMIDADE.
Razer (Europe) GmbH declara que este Razer Orochi™
Bluetooth Laser Gaming Mouse está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE
DANSK
ERKLÆRING OM OVERENSSTEMMELSE MED EU-DIREKTIV
Undertegnede Razer (Europe) GmbH erklærer herved, at følgende udstyr Razer Orochi™ Bluetooth Laser
Gaming Mouse overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
POLSKI
OŚWIADCZENIE O ZGODNOŚCI Z DYREKTYWĄ UE
Niniejszym Razer (Europe) GmbH oswiadcza, ze Razer Orochi™
Wireless Bluetooth Laser Gaming Mouse jest zgodny z zasadniczymi wymogami oraz pozostałymi
stosownymi postanowieniami Dyrektywy 1999/5/EC.
GREEK
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Razer (Europe) GmbH ∆ΗΛΩΝΕΙ ΟΤΙ Razer Orochi™
Bluetooth Laser Gaming Mouse ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ
The full Declaration of Conformity can be requested via the following :
Company : Razer (Europe) GmbH
Address : Winterhuder Weg 82, D-22085 Hamburg, Germany
E-mail : [e-mail]
Complies with
IDA Standards
DA104511
ACCELERATION
Acceleration allows you to increase your physical mouse movement to onscreen
cursor movement ratio based on the rate of change of your movement speed. The
higher the value of acceleration, the higher the ratio will be. You can activate
acceleration by checking the “Enable Acceleration” box and moving the arrow along
the slider.
POLLING RATE
The polling rate determines the time intervals that the PC retrieves data from your
mouse. A higher value would mean shorter intervals and therefore less latency. You
can switch between 125Hz (8ms), 500Hz (2ms) and 1000Hz (1ms) by clicking on the
individual polling rate buttons.
Note:
This function is only available in Wired mode.
Note:
In Wireless mode the Razer Orochi operates at 125Hz only.
MANAGE PROFILES TAB
A profile allows you to store
your various mouse settings
such as sensitivity, button
assignments and macros as
a single group for your
convenience.
In the Manage Profiles tab,
you can create and launch
customized profiles based on
the application you have
activated.
a. Profile: Indicates the
profile number
b. Profile Name:
Double-click this field to
enter a profile name of
your choice.
c. Application: Double-click
this field to open up
directory browsing. Select
the executable file of the
program you want the
profile to be tied to.
d. Auto Switch: Select this
option to activate the
current profile as an
On-The-Fly profile.
With your Razer Orochi, you
can create and save five
profiles using Razer
Synapse. In addition, you can
save as many profiles are you
like on your hard disk and
import it back to your Razer
Orochi. However at any one
time, only five profiles can be
stored on your Razer Orochi.
Right-clicking inside the
Manage Profile tab allows
you to quickly access a list of
extra commands.
MANAGE MACROS TAB
A macro is a
sequence of
keystrokes executed
in a particular order
and timing. It allows
you to execute a
chain of commands,
with the press of
just one button, to
optimize your
gameplay. Macros
can be up to eight
characters in length,
and other tasks
such as media
functions can be
assigned.
Note: The minimum
Macro delay for the
Razer Orochi is
50ms in Wired Mode
and 100ms in
Wireless Mode.
LIGHTING AND MAINTAINENCE TAB
LIGHTING
Turn on/off the the scroll
button and battery
indicator lights on the
Razer Orochi.
MAINTENANCE
Update the Razer
driver and firmware
software by clicking on
the “Check for Updates”
button. This will connect
you to
www.razersupport.com
for the latest
driver/firmware
downloads.
1. Connect the micro-USB end of the cable to the Razer Orochi.
2. Plug the mouse into the USB port of your computer. The Razer Orochi is
then ready for configure.
1
Razer Orochi
USB connector
2
INSTALLING YOUR RAZER OROCHI IN WIRED MODE
八岐大蛇 蓝牙激光游戏鼠标
PAGE 5: 4C COLOR PRINT!!!!!!!!!!!
CoverBack cover
Page 1Inner Front cover
Page 3Page 2
Page 7Page 6
Page 9Page 8
Page 5Page 4
Page 11Page 10
Page 13Page 12
Page 15Page 14
Page 17Page 16
Page 19Page 18
Page 21Page 20
Page 23Page 22
Page 25Page 24
Page 27Page 26
Page 29Page 28
Page 31Page 30
Page 33Page 32
Page 35Page 34
Inner Back coverPage 36