DTD:02072018 User manual For RZ010257 (Consist Gaming Mouse Model: RC30-025701 and USB Dongle Model: DGRFG6)
PACKAGE CONTENTS / SYSTEM REQUIREMENTS PACKAGE CONTENTS Gaming mouse ( Model:RC30-025701) USB Dongle ( Model:DGRFG6) USB wireless receiver adapter USB to Micro-USB cable Important Product Information Guide SYSTEM REQUIREMENTS PRODUCT REQUIREMENTS PC with a free USB port RAZER SYNAPSE 3 REQUIREMENTS Windows® 7 64-bit (or higher) Internet connection 500 MB of free hard disk space F O R G A M E R S . B Y G A M E R S .
REGISTRATION / TECHNICAL SUPPORT REGISTRATION Register your product online at razerid.razer.com/warranty to get real-time information on your product’s warranty status. If you haven’t registered for a Razer ID yet, register now at razerid.razer.com to get a wide range of Razer benefits. Your product’s serial number can be found TECHNICAL SUPPORT What you’ll get: 2 years limited manufacturer’s warranty. Free online technical support at support.razer.com. F O R G A M E R S . B Y G A M E R S .
DEVICE LAYOUT A. Left mouse button I. True 16,000 DPI 5G optical sensor B. Right mouse button J. Profile indicator C. Scroll wheel K. Profile button D. DPI stage up L. Power on/off button E. DPI stage down M. Bottom cover F. Mouse button 5 N. USB wireless receiver G. Mouse button 4 O. USB to Micro-USB cable H. Ultraslick mouse feet P. USB wireless receiver adapter Default DPI stages are as follows: 800, 1800, 4500, 9000, and 16000. The DPI stages can be customized using Razer Synapse 3.
SETTING UP YOUR RAZER LANCEHEAD WIRELESS CHARGING YOUR RAZER LANCEHEAD WIRELESS Using the included USB to Micro-USB cable, plug your Razer Lancehead Wireless to the computer. This connection also acts as the wired mode for your Razer device. For best results, please fully charge your Razer Lancehead Wireless before using it for the first time. A depleted battery will be fully charged in approximately 4 hours.
USING THE USB WIRELESS RECEIVER COMPARTMENT 1. Remove the bottom cover of your Razer Lancehead Wireless. 2. Remove the USB wireless receiver from your PC and place it into the storage space. 3. Reattach the bottom cover onto the Razer Lancehead Wireless and make sure it is securely fastened. F O R G A M E R S . B Y G A M E R S .
USING THE USB WIRELESS RECEIVER 1. Plug the USB wireless receiver into your PC’s USB port. 2. Switch on the Razer Lancehead Wireless. POWER ON POWER OFF Your Razer Lancehead Wireless is now ready for use in wireless mode. F O R G A M E R S . B Y G A M E R S .
USING THE USB WIRELESS RECEIVER ADAPTER Use the USB wireless receiver adapter to easily access and extend the reach of your USB wireless receiver. F O R G A M E R S . B Y G A M E R S .
INSTALLING RAZER SYNAPSE 3 FOR YOUR RAZER LANCEHEAD WIRELESS Step 1: Make sure the USB wireless receiver is connected to the USB port of your computer. Step 2: Install Razer Synapse 3 when prompted* or download the installer from razer.com/synapse. Step 3: Create your Razer ID or log into Razer Synapse with an existing account. *Applicable for Windows 8 or later. F O R G A M E R S . B Y G A M E R S .
CONFIGURING YOUR RAZER LANCEHEAD WIRELESS VIA RAZER SYNAPSE 3 STORED PROFILES Your Razer Lancehead is capable of storing up to 5 profiles from Razer Synapse Pro, which you can use on systems that do not have Razer Synapse installed. Your Razer Lancehead can also store your current profile temporarily until it is replaced with a new active profile. Pressing the Profile button will cycle from the current profile to profiles 1 to 4.
LIGHTING EFFECTS The Lighting tab enables you to customize the look of your Razer device by allowing you to choose from various lighting effects or fully customizing your own. These lighting effects can also be synchronized with other Powered by Razer Chroma devices that support the selected effect.
SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using your Razer Lancehead Wireless, we suggest that you adopt the following guidelines: Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support. Do not attempt to service or fix the device yourself at any time.
If you should experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately. MAINTENANCE AND USE The Razer Lancehead Wireless requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab with a bit of warm water to prevent dirt buildup.
LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION ©2018 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers. By Gamers.”, and “Powered by Razer Chroma” logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks and trade names are the property of their respective owners and other company and product names mentioned herein may be trademarks of their respective companies.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
STATEMENT OFCOMPLIANCE WITH EU DIRECTIVE ENGLISH ENGLISH STATEMENT OF COMPLIANCE WITH EU DIRECTIVE Hereby, Razer (Europe) GmbH, declares that this Razer Lancerhead For (Gaming Mouse model: RC30-025701 and USB Dongle Model: DGRGG6) is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Gaming Mouse Operating Frequency: 2403-2479 MHz Max Output power: 7.97±2 dBm USB Dongle Operating Frequency: 2403-2479 MHz Max Output power: 3.60±2dBm SW version: V1.
