DTD: 29062017 USER MANUAL FOR MODEL: RC30-021702
PACKAGE CONTENTS / SYSTEM REQUIREMENTS PACKAGE CONTENTS Wireless Mouse (Model: RC30-021702) 2x AA batteries USB dongle (Model: DGRFG5) Important Product Information Guide SYSTEM REQUIREMENTS PRODUCT REQUIREMENTS PC / Mac with a free USB port or Bluetooth 4.0 connectivity RAZER SYNAPSE PRO REQUIREMENTS Windows®7 (or higher) Internet connection 500 MB of free hard disk space RAZER SYNAPSE REQUIREMENTS Mac OS X 10.
REGISTRATION / TECHNICAL SUPPORT REGISTRATION Register your product online at razerzone.com/registration to get real-time information on your product’s warranty status. If you haven’t registered for a Razer ID yet, register now at razerzone.com/razer-id to get a wide range of Razer benefits. Your product’s serial number can be found here. TECHNICAL SUPPORT What you’ll get: 2 years limited manufacturer’s warranty. Free online technical support at razersupport.com. F O R GA M E R S .
DEVICE LAYOUT A. Left mouse button B. Right mouse button C. Scroll wheel D. Mouse button 5 E. Mouse button 4 F. DPI cycle button* G. LED / battery indicator H. Slider switch Bluetooth mode Power off mode 2.4 GHz mode I. Ultraslick mouse feet J. 7,200 DPI optical sensor Default DPI stages are as follows: 800, 1800, 2400, 3600, and 7200. The DPI stages can be customized using Razer Synapse Pro / Razer Synapse. F O R G A M E R S . B Y G A M E R S .
SETTING UP YOUR RAZER ATHERIS INSERTING THE BATTERIES 1. Remove the top cover of the Razer Atheris by lifting the back of the cover then pulling it out. 2. Insert the two included AA batteries into the Razer Atheris following the directions indicated on the battery compartment. Caution: The two included AA batteries are non-rechargeable. Dispose of these batteries in accordance with your local environmental laws. For your safety, use only alkaline batteries and do not mix old batteries with new ones. 3.
LOW BATTERY NOTIFICATION The Razer Atheris’ LED indicator will blink red twice in repeated intervals to indicate that the battery level of the inserted batteries are less than 5%*. This lighting sequence will repeat until the batteries are fully drained. Once you receive this notification, it is time to replace the batteries. The indicator percentage can be customized through Razer Synapse Pro. CONNECTING THE RAZER ATHERIS VIA 2.4 GHZ MODE 1.
2. Close the top cover and connect the wireless USB dongle to the USB port of your computer. 3. Push the slider switch of the Razer Atheris to 2.4 GHz mode. The LED indicator will start blinking rapidly. F O R GA M E R S . B Y G AM E R S .
4. Wait until the mouse automatically pairs with the wireless USB dongle. When paired, the LED indicator will change to static blue for 5 seconds before turning off. Keep the pairing devices within close proximity of each other for a faster and more stable connection. Congratulations, your Razer Atheris is now ready to use in 2.4 GHz mode. CONNECTING THE RAZER ATHERIS VIA BLUETOOTH MODE 1. Push the slider switch of the Razer Atheris to Bluetooth mode ( ). F O R G A M E R S . B Y G A M E R S .
2. Press and hold the two side buttons and the DPI cycle button simultaneously for three seconds to activate pairing mode. The LED indicator will blink twice in repeated intervals to show that the device is in pairing mode. 3. Activate Bluetooth on your device and search for new Bluetooth devices. 4. Select “Razer Atheris” from the list of devices found. F O R GA M E R S . B Y G AM E R S .
5. Wait until the mouse automatically pairs with the wireless USB dongle. When paired, the LED indicator will change to static blue for 5 seconds before turning off. Keep the pairing devices within close proximity of each other for faster and more stable connection. Once your device has been paired, your Razer Atheris will automatically reconnect to the device whenever it is in Bluetooth mode and the device is within range. Congratulations, your Razer Atheris is now ready to use in Bluetooth mode.
INSTALLING RAZER SYNAPSE PRO / RAZER SYNAPSE FOR YOUR RAZER ATHERIS Step 1: Make sure your Razer Atheris is connected to your PC or Mac. Step 2: Install Razer Synapse Pro when prompted or download either the Razer Synapse Pro or Razer Synapse installer from razerzone.com/software. Step 3: Register for a Razer ID or log in with an existing account. F O R GA M E R S . B Y G AM E R S .
SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using your Razer Atheris, we suggest that you adopt the following guidelines: Avoid looking directly at the tracking beam of your mouse or pointing the beam in anyone else’s eye. Note that the tracking beam is NOT visible to the naked human eye and is set on an AlwaysOn mode.
6. Customize the buttons on your mouse to suit your style of gaming in order to minimize repetitive or awkward motions while gaming. 7. Make sure that your mouse fits comfortably in your hands. 8. Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs. 9.
LEGALESE COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION ©2017 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers. By Gamers.”, and “Powered by Razer Chroma” logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners. Windows and the Windows logo are trademarks of the Microsoft group of companies.
COSTS OF PROCUREMENT For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product. GENERAL These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased.
Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
