Instruction manual

ManualsBrandsRazer ManualsHeadphonesELECT??

INSTRUCTION MANUALINSTRUCTION MANUAL

ITEM NO:DY8918

   

Specifications

Length 25.8in(655mm)

Mail Rotor Diameter 28.3in (720mm)

Tail Rotor Diameter 5.3in (135mm)

Battery 11.1V 2200MAH 15C li-polymer

Motor Brushless 2750KV

Transmitter 6 Channel Transmitter

Esc 40A brushless esc

Charger DC Li-Po balancing charger

Receiver 6ch receiver

Servos 9g x 4pcs

Height: 235MM(9.3 in)

: 670g(23.7oz)Weight with Battery

:

:

：

:

: 11.1V 2200MAH 15C 

: 2750KV

: 6LCD

: 40A

: 

: 6

: 9X4PCS



:

655MM

720MM

135MM

235MM

670g

Summary of content (9 pages)

PAGE 1
INSTRUCTION MANUAL ITEM NO:DY8918 Specifications ? @ B E Length : 25.8in(655mm) Mail Rotor Diameter : 28.3in (720mm) Tail Rotor Diameter : 5.3in (135mm) Height: 235MM(9.3 in) Weight with Battery : 670g(23.7oz) Battery : 11.1V 2200MAH 15C li-polymer Motor : Brushless 2750KV Transmitter : 6 Channel Transmitter Esc : 40A brushless esc Charger : DC Li-Po balancing charger Receiver : 6ch receiver Servos : 9g x 4pcs FG: : : 655MM 720MM 135MM 235MM 670g ： : : 11.
PAGE 2
WARNINGS ø Battery Charging and Warning As the user of this product, you are solely responsible for operating it in a manner that does not endanger yourself and others or result in damage to the product or the property of others.This model is controlled by a radio signal that is subject to interference from many sources outside your control.
PAGE 3
.Put the antenna into the PVC conduit. 67þ 5h ¾ R $. ! " ¶ ´ ¦# À þ W ith the stick pulled back, the swashplate will tilt toward the rear . æ 5 & - ë . ì & /,0 1 2 . ) 0 1,! . ) ! ". CONTROL TEST ! " Ä % Although each e-razor 3D is control tested at the factory, it is a good idea to test the controls prior to the first flight to ensure none of the servos, linkages or other parts were damaged during shipping and handling.
PAGE 4
With the stick pushed left, the tail pitch slider should move to the right . þ h. : Bf. æ )<&-ë. : ¥ & /,= > ? @ A .
PAGE 5
1. Knob G is GAIN , if the tail is out of control and always keep left-right wobbling vioiently, please adjust the Gain trimmer to increase (+) the gyro gain. t `H，]^G¿t `H，<9]ft vw，<:]t 56，æ!"g x=yZV:9zM，{|56t ，p ZV}~ ?5，t o. 2.
PAGE 6
Parts Listing J O C -2 3.Push up throttle sticker , adjustment knob D, let the pitch degree +9-+11. À>ÕÖ ¹U é ê ë í n ,÷ Õ Ö`H ] ^D , &H ?¿+ 9 - - + 1 1 . Main blade ERZ-001 Plastic paddle ERZ-002 Tail blade Canopy set ERZ-003 ERZ-004 Main blade housing Seesaw and sf-arm set +11 Main blade clamp set ERZ-005 ERZ-006 ERZ-007 ERZ-008 Washout control arm and washout base set WARNING 6 7 8 9 RC helicopter is not toys! Incorrect operation may cause serious injury or damage.
PAGE 7
UP GRADE PARTS Belt ERZ-0025 Bearing 3x8x4 and 3x6x2.5 ERZ-0029 Blade holder One way bearing ERZ-0026 ERZ-0027 Bearing 2x5x2.5 ERZ-0031 Bearing 3x8x3 ERZ-0030 Bearing 5x11x5 ERZ-0028 ERZ-101 Metal main blade clamp set Connecting rod ERZ-0032 Metal Fly bar caddles ERZ-105 Main gear center mount Motor gear One way bearing ring ERZ-0033 ERZ-0034 ERZ-0035 ERZ-0037 Motor mount set ERZ-0039 ERZ-0040 ERZ-0042 DYE-1004 DY-6006 11.
PAGE 8
PAGE 9
3D R/C Helicopter SHENZHEN DYNAM INDUSTRY & TRADE CO.