Installation Manual Part 3

ManualsBrandsRaytheon IIS ManualsElectronicsAir-Ground Radio System

FCC ill: CDG-ARTU

MAGNASTAR

EXHIBITC

C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM

7.0 PROGRAMMING THE MAGNAST AR SYSTEM

7.1 HANDSET CONFIGURATION SCREENS

This section provides detailed information in support of the C-2000 user guide to help the installer with the configuration

programming of the MagnaStar system Included in this section are a flow chart of the maintenance set-up screens and

descriptions of the handset set-up screens. These screens apply to ARTU software version ARTCC40B.

7.1.1 CONFIGURATION SCREEN FLOW CHART

A flow chart of the MagnaStar maintenance screens is shown in this section. The flow chart is intended to provide a

reference guide to help the installers quickly find the location of individual configuration screens. The flow chart includes

both the set-up maintenance screens and the airca]] screens.

1.1

RevS

Summary of content (10 pages)

PAGE 1
FCC ill: CDG-ARTU MAGNASTAR EXHIBITC C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM 7.0 PROGRAMMING THE MAGNASTAR SYSTEM 7.1 HANDSET CONFIGURATION SCREENS This section provides detailed information in support of the C-2000 user guide to help the installer with the configuration programming of the MagnaStar system Included in this section are a flow chart of the maintenanceset-up screensand descriptions of the handsetset-up screens. These screensapply to ARTU software version ARTCC40B. 7.1.
PAGE 2
FCC ID: CDG-ARTU EXHIBIT C MAGNASTAR C-2000 DIGITAL AI RBORNE TELEPHONE SYSTEM -4 AlU DIsable Decay Sense L: Label Phone # I 6 PTT Ring Handset wI Aircraft Call + 4, 14 Call Waiting RevS
PAGE 3
FCC ID: CDG-ARTU MAGNASTAR EXHIBUC C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM Figure7. .8. Configuration 70.:3 Screen Flow Chart con't.
PAGE 4
FCC 10: CDG-ARTU MAGNASTAR EXHIBIT C C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM L--t * Remote StationAssigned I Main~n..ce I 1 Station Set Up I S18tIon I 1 Cockpit 2 Coin Uplink I 3 Voice 4 Fax 5TDO 4 + r~;~~all 5 Alerter I Figure 7.1.I.C. Configuration Screen Flow Chart con't.
PAGE 5
FCC ID: CDG-ARTU MAGNASTAR EXHIBIT C C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM 7.1.2 DETAILED CONFIGURATION SCREENS The following section provides information about the individual configuration screens. This section is intended to provide the installer with a visual referenceto the configuration screensand is supplemental information to the user guide. However it is not intended as a replacementfor the user guide. 7.1.2.1 Services Screen The following screenis the Services screen.
PAGE 6
FCC ID: CDG-ARTU EXHmIT C MAGNASTAR C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM 7.1.2.3 Checking Handset Setup Information Screens The following screenprogressions show how to check the handset "setup" information. These screensdo not require the user to start a maintenancesession. Cabin Station .elect 9 --> select 3 --> Software is Enabled. Ringer Version Numbers select + --> Inplane:l More More --->+ Go Back >t Call Waiting is Enabled. select + --> Direct Call Pick-up Enabled.
PAGE 7
FCC ID: CDG-ARTU MAGNASTAR EXHIBITC C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM 7.1.2.5 Maintenance Screen #1 The first maintenancescreenallows the user to changethe passcode,changethe bi11ingmode, enter handsetphone numbers (inplane, aircall and terminal 10's), enter speeddial numbers .510 -.549 and changethe AIU setup. 7.1.2.5.1 Changing the Passcodeand Billing Mode The billing mode appearsbelow the passcodechange selection. The current value for the billing mode, either Direct or Credit. is highlighted.
PAGE 8
FCC ID: CDG-ARTU EXHIBITC C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM MAGNASTAR 7.1.2.5.2 (nplane Numbers The following screenprogressions show how to enter an inplane number and corresponding label. Inplane numbers are used to make seatto seatcalls. Inplane numbers can vary from 0-9 and an eight character label can be associatedwith each inplane number. Inplane Aircall Satcom Select 4 --> >1 >2 ->3 Waiting Inplane Numbers Select 1 To Disable Call >4 Select an inplane number from the available list.
PAGE 9
FCC ill: CDG-ARTU EXHIBITC C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM MAGNASTAR 7.1.2.5.3 Aircall Numben The following screenprogressionsshow how to enter an aircall number. The procedure to enter a station or aircraft aircall number are the same. A station aircall number applies only to the associatedhandsetthat the aircall number is programmed. An aircraft aircall number applies to all the handsetsin system The installer must know the aircall PIN number in order to enter this number.
PAGE 10
EXHffiIT C FCC ill: CDG-ARTU C-2000 DIGITAL AIRBORNE TELEPHONE SYSTEM MAGNASTAR 7.1.2.5.3.1 Disabling a Handset From Ringing with an Aircraft Aircall Number It is possible to disable any nwnber of individual handsetsfrom ringing (including the CAS output) when an aircraft aircall nwnber is prograrnrned in the system. Each handsetthat is not to respondto an aircraft aircall number must be programmed as such.