Installation Instructions

ManualsBrandsRaytec ManualsAccessoriesRAYLUX 50 High Power PoE White-Light Illuminator

Power in

Made in UK

P-cell

adjust

Power

adjust

Installation Steps

1. Mount Illuminator

2. Feed cable into connector

3. Connect cable to

waterproof connector

4. Connect to high power

PoE switch or hub

Set Up Steps

1. Optional night set-up for optimum

image performance

2. Adjust vertical angle

3. Tighten all ﬁxings

Package Contents

1. High power PoE illuminator including

waterproof connector

High Power PoE illuminators installation guide

and

MAX 50 PoE LUX 50 PoE

This installation guide provides instructions for installing the RAYMAX 50 & RAYLUX 50

High Power PoE series illuminators.

Version 4.0

Overview

RAYMAX 50 / RAYLUX 50

HP PoE illuminator

(back of illuminator)

Summary of content (6 pages)

PAGE 1
MAX 50 PoE and LUX 50 PoE High Power PoE illuminators installation guide This installation guide provides instructions for installing the RAYMAX 50 & RAYLUX 50 High Power PoE series illuminators. Installation Steps 1. Mount Illuminator 2. Feed cable into connector 3. Connect cable to waterproof connector Overview RAYMAX 50 / RAYLUX 50 HP PoE illuminator (back of illuminator) 4. Connect to high power PoE switch or hub Set Up Steps 1. Optional night set-up for optimum image performance 2.
PAGE 2
Photocell Power Adjust Photocell Adjust P-cell adjust + Power adjust + Power in Made in UK Waterproof RJ45 connection ! 1.5m Install in a well ventilated area 2 Do not continually stare at lamp The Raymax and Raylux 50 PoE illuminators use the IEEE802.3af standard detection method and require and injector that can deliver up to 25W. Specifications subject to change without notice. Installation to be carried out by suitable trained and qualified personnel.
PAGE 3
Installation InteRnal AND EXTERNAL 1 1 Mount illuminator 2 Feed CAT5 cable into waterproof connector 3 Unscrew waterproof connector. Feed cable through connector and select the appropriate rubber bung for the outside cable diameter. Terminate cable with an RJ45 connector and fit into the RJ45 socket. Fit the two waterproof connector ends together and tighten.
PAGE 4
Technical Drawings (Not to scale) Standard Bracketry Optional Bracketry 8.5mm (0.3”) 48mm (1.9”) 36mm (1.4”) 72mm (2.8”) 25mm (1”) Wall Mount RM 50/RL 50 PoE Specifications Infra-Red and WHITE-LIGHT Series Input Output PoE Photocell Adjustable Power Weight PoE up to 25W Uses IEEE802.3af standard detection method. CAT5 Cable Integrated (adjustable sensitivity) 10% - 100% 1kg (2.
PAGE 5
Trouble Shooting Step 1: Basics • Ensure power adjust is turned to the maximum level for troubleshooting. • Ensure Photocell operates as required and turns lamp on and off when covered, if necessary adjust the photocell sensitivity. • When the light is on, a dull red glow should be visible from your Infra-Red illuminator, and a bright white beam should be visible from your White-Light illuminator.
PAGE 6
UK / Europe T: +44 (0) 1670 520055 F: +44 (0) 1670 819760 sales@rayteccctv.com Americas (Toll Free) T: +1 888 505 8335 ussales@rayteccctv.com PoE/13/6.1 www.rayteccctv.