User's Manual

ManualsBrandsRaytac ManualsElectronicsWireless Touch Presenter E

Wireless Touch Presenter E

(ExpressCard/34 Form Factor)

User’s Guide

Information in this document is subject to change without notice. No part of

this document may be reproduced or transmitted in any form or by any means,

electronic or mechanical, for any purpose, without the express written prior

permission of the seller.

The seller provides this document without warranty, or condition of any kind.

The seller may make improvements or change in the product described in this

documentation at any time.

Other product and company name herein may be the trademarks of their

respective owners.

○

Be sure to carefully read this User’s

Guide first for the proper use of the

Wireless Touch Presenter E and

keep it for future reference.

Summary of content (7 pages)

PAGE 1
Wireless Touch Presenter E (ExpressCard/34 Form Factor) User’s Guide Be sure to carefully read this User’s Guide first for the proper use of the Wireless Touch Presenter E and keep it for future reference. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written prior permission of the seller.
PAGE 2
IMPORTANT SAFETY AND HEALTH INFORMATION WARNING! RISK OF INJURY! Laser beam can cause permanent damage to eyes. Do not look into the laser beam or shine the laser beam into your eyes, other peoples’ eyes, or pet’s eyes. WARNING! RISK OF INJURY! Keep this device away from Children. This is a working tool, not a toy or entertainment device. It should only be used by adults. FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules.
PAGE 3
Introduction of Wireless Touch Presenter E 2.4GHz of wireless technology, the Wireless Touch Presenter E allows you to control presentations from up to 130ft (40 meters) away. It offers touch pad capability and PowerPoint presentation control with a built-in laser pointer.
PAGE 4
Parts Description Figure 1 Front View Laser beam Figure 2 Rear View Figure 3 USB Receiver 4
PAGE 5
Initial set up for the Wireless Touch Presenter E 1) Installing the battery with the positive (+) side up. 2) Taking out the USB receiver 3) Connecting the USB receiver to your computer Note: In case your Mac computer cannot identify the device when you plug in the USB receiver for the first time use, please follow the instructions below to solve this problem.
PAGE 6
Operating the Wireless Touch Presenter E Function LASER Laser pointer F5 ESC Start/Exit slide show How to operate Press to emit the laser beam. 1. Click to start slide show. 2. Press for 1 second to exit slide show. Go to next slide Press to go to next slide. Go to previous slide Press to go to previous slide. Use the touch pad to control the mouse cursor. Main touch pad Note: The touch pad will enter sleep mode after 2 minutes of inactivity, click the left mouse button to awake the touch pad.
PAGE 7
How to pair the Wireless Touch Presenter E 1. Click the “ID Link” button on the USB receiver first, the “Link indicator” lights up. 2. Press “ ” and “ ” buttons (on the Presenter) simultaneously for 3 seconds until the “Link indicator” on the USB receiver starts blinking, the paring is completed. Product Specifications System Frequency range: 2400~2483MHz (16 channels and 65535 ID per channel) Remote range: Up to 130 feet (40 meters) line of sight Operating voltage: 2.6V~3.