User's Manual

ManualsBrandsRaytac ManualsElectronicsWireless ExpressCard Presenter

Wireless ExpressCard Presenter

(ExpressCard Size)

User’s Guide

Information in this document is subject to change without notice. No part of

this document may be reproduced or transmitted in any form or by any means,

electronic or mechanical, for any purpose, without the express written prior

permission of the seller.

The seller provides this document without warranty, or condition of any kind.

The seller may make improvements or change in the product described in this

documentation at any time.

Other product and company name herein may be the trademarks of their

respective owners.

○

Be sure to carefully read this User’s

Guide first for the proper use of the

Wireless ExpressCard Presente

and keep it for future reference.

Summary of content (7 pages)

PAGE 1
Wireless ExpressCard Presenter (ExpressCard Size) User’s Guide Be sure to carefully read this User’s Guide first for the proper use of the Wireless ExpressCard Presenter and keep it for future reference. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written prior permission of the seller.
PAGE 2
IMPORTANT SAFETY AND HEALTH INFORMATION WARNING! RISK OF INJURY! Laser beam can cause permanent damage to eyes. Do not look into the laser beam or shine the laser beam into your eyes, other peoples’ eyes, or pet’s eyes. WARNING! RISK OF INJURY! Keep this device away from Children. This is a working tool, not a toy or entertainment device. It should only be used by adults.
PAGE 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 4
An available USB port How to use the PCMCIA Card Boat The Wireless ExpressCard Presenter can be stored in the ExpressCard slot directly. In case your computer is equipped with PCMCIA slot, please place the Presenter in the boat and then store it in your PCMCIA card slot. Place the Presenter in the boat Insert the bottom of the USB receiver, label upwards, into the compartment and press the USB receiver to the compartment.
PAGE 5
Operating the Wireless ExpressCard Presenter Front View Button with white character Rear View Function How to operate LASER Press to emit the laser beam. Slides Press to start slide show. ESC Press to exit slide show. Next Press to go to next slide. Prev. Press to go to previous slide. Note: The FN button is used in combination with the other buttons (blue character) for special PowerPoint function as the following.
PAGE 6
Fn + Link Change ID Please see “How to pair the Wireless ExpressCard Presenter”. Note: Implement ID change ONLY when serious RF interference causes the remote control malfunction. Note: The low battery indicator on the Presenter will light up when the power is running low, it is probably time to replace battery whenever you see the low battery indicator lights up. How to pair the Wireless ExpressCard Presenter 1. Click the “ID Link” button on the USB receiver first, the “Link Indicator” lights up. 2.
PAGE 7
Operating: 10%~85% RH Non-operating: 10%~95% RH Laser: Semiconductor laser(λ = 650 nm), emission duration: continuous Laser output power: Max. 0.95mW Note: Design and specifications are subject to change and improvement without notice.