User's Manual

ManualsBrandsRaytac ManualsElectronicsKid Finder

Kid Finder

User Manual

Information in this document is subject to change without notice. No part of this

document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose, without the express written prior permission of the seller.

The seller provides this document without warranty, or condition of any kind. The seller

may make improvements or change in the product described in this documentation at

any time.

Other product and company name herein may be the trademarks of their respective

owners.

○

Be sure to carefully read this User’s

Manual first for the proper use of the

Kid Finder and keep it for future

reference.

Summary of content (8 pages)

PAGE 1
Kid Finder User Manual Be sure to carefully read this User’s Manual first for the proper use of the Kid Finder and keep it for future reference. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written prior permission of the seller. The seller provides this document without warranty, or condition of any kind.
PAGE 2
Kid Finder User Manual Introduction of Kid Finder The Kid Finder is designed to help parent or guardian to take better care of a child, simply set the warning distance, put on the child unit, whenever the child has moved outside the distance, the parent unit will trigger an alert buzzer, and show you the direction (assisted) toward the child ─ Simple, Practical and Affordable. Features • Out-of-range warning. • Assisted direction toward the child unit. • Call parent unit from child unit.
PAGE 3
Kid Finder User Manual Parts Description The Kid Finder consists of two primary components: Parent unit (Fig. 1) and Child unit (Fig.2) Fig. 1 Parent unit Fig.
PAGE 4
Kid Finder User Manual How to use Kid Finder 1. Insert the AAA batteries into the battery compartment of the parent unit and child unit. 2. Switch on the child unit, the green LED of the child unit starts blinking. 3. Push up the slider on the parent unit to the desired distance, the red LED starts blinking. 4. Put the child unit on the child, whenever the child unit moves out of the range you set, the parent unit will alert you with a buzzer sound.
PAGE 5
Kid Finder User Manual 5. Press and hold the search button for 2 seconds after the buzzer sounded, and then release the search button, the parent unit will show the direction (assisted) toward the child unit. Note: To achieve the best performance, please hold the parent unit correctly. 6. The direction (assisted) is displayed by 3 respective LED, the number of LED’s illuminated would indicate the radio signal strength received from the child unit (see the table below).
PAGE 6
Kid Finder User Manual 7. All 10 direction LEDs will be lit when the parent unit is around 2 meters close to the child unit (depend on environment). 8. Emergency call: the child unit is able to call the parent unit actively while the two units are activated and connected, simply click the emergency button on the child unit, the parent unit’s buzzer sounded. Click the search button to silence the buzzer and the parent unit will resume its original mode i.e. stand-by mode or search mode.
PAGE 7
Kid Finder User Manual How to pair the child unit and the parent unit Note: Implement ID change ONLY when serious RF interference. 1. Switch on the child unit. 2. Set the alert distance of the parent unit. 3. Press and hold the child unit’s Link button for 1 second till the green LED lights up, the child unit stays in pairing mode for 15 seconds, in the meantime, the buzzer of parent unit sounded. Press the child unit’s Link button for 1 sec. 4.
PAGE 8
Kid Finder User Manual Specifications Parent unit ( Receiver ) Frequency Channel number 2400MHz~2483MHz 4 multi channels and 65535 ID per channel Data rate Wireless range Child unit ( Transmitter ) 250 Kbps 300 feet (90m) in open space; 100 feet(30m) indoors Frequency tolerance +/-25ppm Sensitivity -85dBm Out of range warning Buzzer Search direction assisted 10 LEDs Working:3mA (average) Power Consumption Working:3mA (average) Standby: 3mA (average) Search: 35mA Power Type AAA alkaline bat