User Manual IEEE 802.11 b/g/n 2.
WFM-210 iAudio(Airplay/DLNA) (Realtek RTL8196EU+RTL8188ER) Single Module G G G G G G aVVU UG 2
Table of Contents 1. Product Overview-----------------------------------------------------5 1.1. Extended Application-------------------------------------------------5 2. Module Parameter----------------------------------------------------6 2.1. Basic Parameter-------------------------------------------------------6 2.2. Regulation Requirements---------------------------------------------6 2.3. Environment Requirements-------------------------------------------7 2.4.
1. Product Overview WFM-210 Serial iAudio(Airplay/DLNA) module is a single chip wireless audio module that developed by Rayson Technology(Shenzhen) Ltd Company。 WFM-210 Serial Wi-Fi Audio module integrates multiple audio formats such as MP3, WMA, RA, AAC, WAV, APE, FLAC and Hi-Fi lossless music decoding, maximum decoding capacity up to 4.
2. Module Parameter 2.1 Basic Parameter Feature Detailed Description Antenna Type IPEX compatible antenna Main chip RTL8196EU Frequency range 2.412GHz-2.462GHz 2.412GHz-2.484GHz CPU clock 400MHz DDR1 speed 156.25MHz DDR1 size 32MB Flash size 8MB SPI Flash PCB stack 4 layers Operating Voltage 3.3VDC +/- 10% Power Consumption 1.
2.
3. Pin Assignment on module Abbreviations in used: I: Input AI: Analog Input O: Output IO: Bi-Directional Input/Output AO: Analog Output AI/O: Analog Bi-Directional Input/Output P: Digital Power G: Digital Ground PIN NAME TYPE PIN NAME TYPE 1 GND G 52 GND G 2 GPIO_A4 I/O 51 GND G 3 Ethernet_LED O 50 GND G 4 GND G 49 GND G 5 3.3V P 48 GND G 6 3.3V P 47 ANT_A(1T1R_ANT) A 7 3.
aVVU UG 9
52 27 1 26 4.
5. DVT Report Mode:11b Channel Pass/Fall *DLQ 6WDJH 'HF 2XWSXW 3RZHU G%P Transceiver:A Bandwidth:20MHz Data Rate: 11Mbps Y Y Y Y Y Y Y Y Y Y Y Y Y Crt >17 EVM(%)Freq.
6.
Antenna Information Antenna Type: PCB Antenna Antenna Gain: 3.3dBi Manufacturer: Unictron Technology Corporation Model Number: AA107 Patent No.
7.Outline Drawing 7.
7.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.