Specifications

Model: RM05
Turn ON/OFF lights,
Double -click to activate
color changing. Tripe click
to switch color mixing.
Dim up / Change color
Indicator
Function
Operation
1. Pair the remote to receiver
The remote controller needs to be paired to receiver to work. User can pair up to 5
remote controllers to one receiver and each single remote controller can be paired to
any receiver.
To pair a new remote to the receiver, please operate with following two steps:
1). Cut off the power of receiver and power on again after more than 5 seconds.
2). Hold press remote and key simultaneously and briefly within 10 seconds
after receiver powered on.
After this operation, the remote is paired to the receiver and ready to work.
Specification
Working voltage
Wireless protocol
Frequency band
Wireless power
Working temperature
General Purpose
Dimming &
Color Control
DC 3V, CR2032 battery
Umi protocol based on SIG BLE Mesh
2.4GHz ISM band
< 7dBm
-20-55 C(-4-131 F)
Dim down / Change color
3. Adjust color
For working with multi-color receivers, user can double click the key to activate
the color adjusting mode. After double click, the and key will swap to color
adjusting function shortly. The indicator will flash at the color adjusting mode. The up
and down key will swap back to dimming function after no operation for a while.
Battery:
CR2032
2. Unpair the remote controller
To unpair the remote from the receiver, please operate with following two steps:
1). Cut off the power of receiver and power on again after more than 5 seconds.
2). Hold press all 3 keys simultaneously within 10 seconds after receiver powered
on.
After this operation, the remote will be unpaired from receiver.
Pair to receiver
*Hold press in 10 seconds
once receiver powered on.
4. Change RGB/White mixing mode
For RGB+White and RGB+CCT application, user can switch the color mixing mode
between white(CCT), RGB and White(CCT)+RGB mode.
To click the key for 3 times rapidly, the color mixing mode on receiver will change.
Remote Controller
Umi Smart Wireless