Users Manual Part 4

ManualsBrandsRaymarine ManualsElectronicsRaymarine multifunction display supporting 2.4GHz Wi-Fi functionality

Table Of Contents

Chapter 7 Dashboard app
- 7.1 Dashboard app overview
Chapter 8 Technical support
- 8.1 Raymarine product support and servicing
  - Identify display variant and software version
  - Viewing product information
- 8.2 Learning resources

Example—ElementSdisplay

Foreachinstanceoftheﬁshﬁnderappthatisavailableonthe

homescreenyoucanselectwhichﬁshﬁnderchannelthatyouwantto

use .Thechannelselectionwillpersistoverapowercycle.

Fishﬁnderchannels—Element™HVdisplays

ThefollowingﬁshﬁnderchannelsareavailableonElement™HV

displays,dependingonyourconnectedtransducer.

RealVision™3Dchannel(350kHz/1.2MHz)

TheRealVision™3Dchannelisavailablewhen

connectedtoaHyperVision™transducer.

SideVision™channel(350kHz/1.2MHz)

TheSideVision™3Dchannelisavailablewhen

connectedtoaHyperVision™transducer.

DownVision™channel(350kHz/1.2MHz)

TheDownVision™channelisavailablewhen

connectedtoaHyperVision™orDownVision™

transducer.

Sonarchannel(ConicalhighCHIRP(200kHz))

Thesonarchannelisavailablewhenconnectedto

anycompatibletransducer.

81384-2-en-US.pdf 49 4/25/2019 1:26:09 PM

Summary of content (16 pages)

PAGE 1
Example — Element S display For each instance of the fishfinder app that is available on the homescreen you can select which fishfinder channel that you want to use. The channel selection will persist over a power cycle. Fishfinder channels — Element™ HV displays The following fishfinder channels are available on Element™ HV displays, depending on your connected transducer. RealVision™ 3D channel (350 kHz / 1.2 MHz) The RealVision™ 3D channel is available when connected to a HyperVision™ transducer.
PAGE 2
Switching fishfinder channel frequency On Element™ HV variant displays DownVision™, SideVision™ and RealVision™ 3D channels are available in both 350 kHz (Standard) and 1.2 MHz (Hyper) frequencies. With either DownVision™, SideVision™ or RealVision™ 3D channel displayed: 1. Press the Menu button. 2. Select the Freq: option. 3. Select either Standard (350 kHz) or HyperVision (1.2 MHz) as required. HyperVision™ channels provide higher resolution than standard channels with reduced range.
PAGE 3
• Pressing any button on the Directional pad will switch to pause / playback mode. Pause / Playback mode In pause / playback mode the image is temporarily paused and the cursor can be moved around the screen. Control behavior: • Pressing the Plus button will switch to zoom mode and the scrolling image remains paused. • When in Zoom mode pressing the Plus or Minus buttons will increase and decrease the zoom level. • Pressing the OK button displays the fishfinder context menu.
PAGE 4
Scrolling mode Scrolling mode is the default mode when the fishfinder app is opened. In scrolling mode an image is displayed which scrolls across the screen. Control behavior: • Pressing the Plus or Minus buttons will increase and decrease the zoom level. • Pressing any button on the Directional pad will rotate the image in the respective direction. • Pressing the Waypoint button will place a waypoint at your vessels’s current location. • Pressing the Menu button will open the app menu.
PAGE 5
2. Press the Waypoint button and, if required enter relevant waypoint details. Scrolling will resume automatically if no buttons are pressed for approximately 15 seconds. 53 81384-2-en-US.
PAGE 6
Chapter 7: Dashboard app 7.1 Dashboard app overview The Dashboard app enables you to view system data. System data may be generated by your display or by devices connected to your display via SeaTalkng ® / NMEA 2000. Note: For data to be available in the Dashboard app it must be transmitted to your display from compatible hardware using supported protocols and messages. You can configure which Data pages you want visible in the Dashboard app, the Data page selection will persist over a power cycle.
PAGE 7
Alternatively, you can select a page you want to display using the page icons found in the app menu. Hiding and showing data pages With the dashboard app displayed and active: 1. Press the Menu button. 2. Select the Settings icon. The menu is opened on the Pages tab. 3. Using the Up button and Down button, highlight the page you want to hide or show. 4. Press the OK button. 5. Select either Hide page or Show page. 6. Press the Menu button to close the menu.
PAGE 8
1. Navigation dial — The navigation dial provides a full compass with Heading read out, COG indicator and destination waypoint indicator. 2. Sailing dial — The sailing dial provides a full compass with wind speed read out and wind angle indicator. The sailing dial can be switched between displaying True wind and Apparent wind. Dial indicators: COG indicator Visual identification of your course over the ground. The COG indicator is available on the navigation dial when COG data is available.
PAGE 9
Chapter 8: Technical support 8.1 Raymarine product support and servicing Raymarine provides a comprehensive product support service, as well as warranty, service, and repairs. You can access these services through the Raymarine website, telephone, and e-mail. Product information If you need to request service or support, please have the following information to hand: • Product name. • Product identity. • Serial number. • Software application version. • System diagrams.
PAGE 10
Worldwide support Region Contact United Kingdom (UK), EMEA, and Asia Pacific • E-Mail: support.uk@raymarine.com United States (US) • E-Mail: support@raymarine.com • Tel: +44 (0)1329 246 777 • Tel: +1 (603) 324 7900 (Toll -free: +800 539 5539) Australia and New Zealand (Raymarine subsidiary) • E-Mail: aus.support@raymarine.com France (Raymarine subsidiary) • E-Mail: support.fr@raymarine.com Germany (Raymarine subsidiary) • E-Mail: support.de@raymarine.
PAGE 11
Identify display variant and software version Refer to the Getting started menu: Homescreen > Settings > Getting started on your display to identify product variant and current software version. Viewing product information You can view detailed product information about your display. 1. 2. 3. 4. 5. Select the Settings icon from the Homescreen. Select the This display tab. Select About this product from the DIAGNOSTICS section. If the Save data button is highlighted press the Left button.
PAGE 12
2. Enter a filename for the data using the onscreen keyboard, or keep the default filename. 3. Select Save. 4. Select Eject card to safely remove the memory card, or select OK to return to the Product information page. Viewing information about networked products Product information for networked products can be viewed from the Networked devices list. From the Homescreen: 1. Select Settings. 2. Select This display. 3. Select Networked devices.
PAGE 13
8.2 Learning resources Raymarine has produced a range of learning resources to help you get the most out of your products. Video tutorials Raymarine official channel on YouTube: • YouTube LightHouse™ 3 tips and tricks: • Raymarine website Video Gallery: • Raymarine website Note: • Viewing the videos requires a device with an Internet connection. • Some videos are only available in English.
PAGE 14
62 81384-2-en-US.
PAGE 15
81384-2-en-US.
PAGE 16
Raymarine Marine House, Cartwright Drive, Fareham, Hampshire. PO15 5RJ. United Kingdom. Tel: +44 (0)1329 246 700 www.raymarine.com a brand by 81384-2-en-US.