Manual

Do NOT use a sharp object to open

the Tag

Do NOT open a Tag in wet or dirty

conditions

Preparing your Tag for use

Fit Battery

Before you can use your Tag, you must

Taking care not to disturb other

internal components, insert the

supplied CR2 3V battery

CR2 3V

Ensure correct polarity

Important!

Replace the Tag back and

snap shut

Use a coin or similar object to

open the Tag

1. Fit the battery supplied.

2. Register the Tag with the LifeTag system on your

boat. See overleaf

84196_1.fm Page 1 Thursday, March 30, 2006 3:11 PM

PAGE 1
84196_1.fm Page 1 Thursday, March 30, 2006 3:11 PM Before you can use your Tag, you must: 1. Fit the battery supplied. 2. Register the Tag with the LifeTag system on your boat. See overleaf Preparing your Tag for use Fit Battery Do NOT use a sharp object to open the Tag Do NOT open a Tag in wet or dirty conditions 1. Use a coin or similar object to open the Tag 2. Taking care not to disturb other internal components, insert the supplied CR2 3V battery Important! Ensure correct polarity CR 3.
PAGE 2
84196_1.fm Page 2 Thursday, March 30, 2006 3:11 PM Register Tag Important Registration must be completed within one minute of switching on power to the Base Unit. 1. When you have fitted the Tag battery, bring the Tag near to your LifeTag system Base Station and switch on power to the Base Station. 2. IMMEDIATELY press and release Tag button, to activate (switch on) the Tag RED Flashes 3. Press and release Tag button again. Constant RED REGISTRATION START 4.