Installation Instructions

Headlight Manual
Thanks for purchasing Ravemen product.
Important:
For your safety, read this manual thoroughly
before using the product and keep it properly for future reference.
Scan and like our facebook page for more info and service:
Techn ical Specificat io ns
Perfor ma nc e Parameters
hrs
LED: 2*CREE LEDs with a lifespan of 50000 hours
Battery: 6000mAh/3.7V rechargeable Lithium-ion battery
Dimensions (Headlight):
100mm (L)*48mm (W)*27mm (H)
Weight (Headlight): 220g
Materials: The front and main body is made by aluminum with Mil Type III Hard
Coat Anodizing; the rear part and the handlebar mount are made by durable
plastic
Package includes: front bike light*1, handlebar mount*1, thick silicone shim*1,
thin silicone shim*1, USB cable*1, wireless switch*1, CR2032*1
Waterproof
150 meters
1 meter
Headlight:
IPX8
Wireless switc h:
IPX4
Qu ick Guide
2
1
3
4
Provides far reaching beam in Mountain Biking and Emergency modes.
NO.
Description
Item
High
beam
Low
beam
Power
button
Menu
button
LED runtime
display
Mode
indicators
USB output
port
TypeC
input port
Wireless
switch
1) Long press the button 1.5s to turn on/off power.
2) Single click for mode changing between Road Biking and Mountain
Biking modes.
1) When power is on, single click to change brightness levels in Road
Biking or Mountain Biking modes.
2) When power is on, press the button 0.3s and hold to activate
Emergency mode, release to go back to previous mode and
brightness level.
When icon is on, the light is in Road Biking Mode;
When icon is on, the light is in Mountain Biking Mode.
Max output: 5V, DC/1.5A，use as power bank to charge digital
products: cell phone, tablets, MP3/MP4, etc;
built-in over-discharge protection;
The LED display will show ”CC” when charging the connected device.
1) Max input: 5V, DC/1.8A; built-in over-charge protection.
2)
Connect with external power to extend the runtime of the battery.
Note: When the inside battery is empty and the light is only powered
by the external power(5V/2A), the maximum output of the light will
only reach to 800 lumens.
Engineered DuaLens optical design for road biking and providing
anti-glare closed range flood light, perfect for commuting.
1
31.8mm
35mm
2
Mounting Your Light
Select the suitable configuration for your handlebar:
Place the thick silicone shim
inside the handlebar mount
Mount the handlebar mount and adjust the angle for actual needs, then tighten
the screw with the hex key provided: (make sure the screw is completely
tightened before riding)
One thick silicone shim
3
4
5
2
1
Slide the headlight in the right direction to connect with the handlebar mount.
Slide in
Press and hold the quick
release tab and slide
out the light.
Slide out
Secure the wireless switch to the handlebar and control the light remotely:
Warranty Exclusions:
1. Without original sales receipt or proof of the purchase
2. Normal wear and tear and normal battery deterioration
3. Unauthorized modifications or alterations, improper use and maintenance
Warra nt y
Lithium-ion battery inside, don't put the light in a fire, otherwise it may cause
explosion!
Please charge the light with qualified USB power adapter, using defective USB
power adapter may cause power leakage or fire disaster, etc. Ravemen is not
responsible for any of such consequences.
Da ng er !
Don't stare the light directly when on, otherwise it may cause temporally blindness.
For others' safety, don't shine the light(high beam) directly to oncoming vehicles
and pedestrians.
Keep the light away out of Children's reach. And children should be accompanied
by adults when using the light.
Don't disassemble or modify the light, otherwise it may cause danger and void your
warranty.
Al er t!
LUMENS
1600
PR 16 00
2.5
800
4.0
7.0
20
400
200
100
400
1.4
2.0
4.0
1600
800
1600
1)The display refreshes at intervals of:
A) 1 hour when remaining runtime is above 10 hours;
B) 0.5 hour when remaining runtime is above 1 hour and below
10 hours. If the readout is 1.5, the actual runtime is between
1.5 hours and 2 hours;
C) 0.1 hour when remaining runtime is below 1 hour.
2) Low battery indicator: the display will show Lo when the light is
in low power.
24
Other features
1)
2)
Intelligent thermal management circuit to p revent overheat of LEDs.
Intelligent Memor y circuit remembers the la st used brightness level
and mode when turned on a gain.
6
5
7
8
9
10
We proudly claim and warrant our products free of defects in material and
workmanship for 2 years from the day of purchase under normal use. Accessories
and spare parts are warranted for 1 year. If a covered defect occurred, return the
light to the place of purchase. If this happens within 15 days from the day of
purchase, we will replace the defective product with a brand new one without extra
charges; After 15 days from the day of purchase, handling and transportation
charges shall be borne by person desiring service. Limited lifetime warranty is also
available after 2 years warranty period and the cost of service and spare parts
will be charged accordingly.
Notes:
1) The above data are tested in Lab in line with ANSI/NEMA FL1 standard and may vary by
environment and user conditions;
2) Only the low beam will be on in Road Biking mode; Both the high beam and the low beam will
be on in Mountain Biking and Emergency modes;
3) To meet IPX8 waterproof standard, please make sure the tail USB caps are securely mounted before use.
Down
31.8mm
35mm
1
2
One thin silicone shim
Place the thin silicone shim
inside the handlebar mount
3
4
2
1
6
5
7 8
9
Web site: www.ravemen.com
Tel/Fax: [phone]
Email:
[e-mail]
Address: 620, 6/F, TaiYangNeng GuiGu Building, Yunfeng road,
Longhua, Shenzhen, China 518109
400
Press the small button 2s to turn on/off the light, single click to change
brightness level; Single click the large button to change modes.
Open the remote switch from the back cover and place the battery
inside with the positive pole facing up.
Transmission range: 0-1 meter; the signal may be weakened due
to low battery and low temperature.
Rapid flashing
Powe rBank
Standard charging time: 3.5h (5 V, DC/ 1.8A), approximate values and may vary
by user conditions.
The LED display will flash in the form of marquee sign during charging process,
and the screen will display number 88 when charging is completed.
Batter y Charging
Connect the light to the computer USB port, USB AC adapter or
Power bank to charge.
Attention!
Note: The receiver chip of headlight will switch to sleep mode after the headlight is
turned off for 3 days. Under this mode, the headlight cannot be turned on by the
wireless switch and the runtime screen will not display CC when used as power bank.
To activate the chip and the screen, press the power button of the headlight to
turn the light on.
For your safety, please read this manual thoroughly and use your light accordingly.
Make sure the Light is mounted securely on the handlebar each time before riding.
Release the bike light from the handlebar mount while in the outdoors in case of theft.
To maintain the best performance and extending the life of the Lithium-ion battery:
1. Check the battery and charge the battery up before your first riding.
2. Avoid completely discharging, allow partial discharges and avoid over charging
(usually).
3. Keep and storage your light at room temperature.
4. Charge your light to 50% full every 3 months for long term storage.
5. Make two complete charging and discharging cycle to calibrate the led display
after long term storage.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement