Data Sheet

www.rs-online.com/raspberrypi
Raspberry Pi
Pi NoIR Camera Module
Product Name Pi NoIR - Raspberry Pi Infrared Camera Module
Product Description Featuring the same 8 megapixel image sensor as the standard Raspberry Pi
camera with the infrared cut-off lter removed to increase IR light sensitivity.
The Pi NoIR is compatible with all Raspberry Pi models and provides high
denition, high sensitivity, low crosstalk and low noise image capture in
an ultra small and lightweight design. The camera module connects to the
Raspberry Pi board via the CSI connector which is capable of extremely high
data rates and it exclusively carries pixel data to the processor.
RS Part Numer 913-2673
Specications
Image Sensor Sony IMX 219 PQ CMOS image sensor in a xed-focus module with IR
blocking lter removed.
Resolution 8-megapixel
Still picture resolution 3280 x 2464
Max image transfer rate 1080p: 30fps (encode and decode)
720p: 60fps
Connection to Raspberry Pi 15-pin ribbon cable, to the dedicated 15-pin MIPI Camera Serial Interface
(CSI-2).
Image control functions Automatic exposure control
Automatic white balance
Automatic band lter
Automatic 50/60 Hz luminance detection
Automatic black level calibration
Temp range Operating: -20º to 60º
Stable image: -20º to 60º
Lens size 1/4”
Dimensions 23.86 x 25 x 9mm
Weight 3g
Note The Pi NoIR camera is sensitive to short-wavelength IR radiation
(around 880nm) and requires IR illumination to see in the dark.

Summary of content (1 pages)