MSDS

MATERIAL SAFTEY DATA SHEET - MSDS
RAPID SET® FLOW CONTROL®
Date Issued: 11-Jul-2009
SECTION 1 – PRODUCT AND COMPANY INFORMATION
Supplier
CTS Cement Manufacturing Corp.
11065 Knott Ave., Suite A
Cypress, CA 90630, United States
Telephone Number: 714-379-8260
FAX Number: 714-379-8270
Email: [e-mail]
Website: www.ctscement.com
Manufacturer
CTS Cement Manufacturing Corp.
11065 Knott Ave., Suite A
Cypress, CA 90630, United States
Telephone Number: 714-379-8260
FAX Number: 714-379-8270
Email: [e-mail]
Website: www.ctscement.com
HMIS III Rating:
Health: 2
Fire: 1
Physical: 0
Supplier Emergency Contact
1-714-379-8260
Manufacturer Emergency Contact
1-714-379-8260
Product Name: Rapid Set Flow Control
CAS Number: N/A
Chemical Family: Synthetic polymer
MSDS Number: 09-38085
Product Code: 811
SKU: 7 2709638085 3
SECTION 2 — COMPONENT INFORMATION
Ingredient (Specific Chemical Identity, Common Name)
CAS Number
% of Total Weight
Sodium sulfate
7757-82-6
1.0 - 5.0
Formaldehyde
50-00-0
< 0.195
SECTION 3 — HAZARDOUS INFORMATION
Primary Route(s) of Entry:
Inhalation, Skin, Eye, Ingestion
Inhalation Hazards:
May cause respiratory tract, nose, throat, and lung irritation and inflammation
Skin Hazards:
May cause burns. Depending on the concentration and duration of exposure, aqueous
solutions can cause a strongly irritating or corrosive effect on the skin or eyes. Irritating
to eyes, respiratory system and skin.
Eye Hazards:
May cause a strongly irritating or corrosive effect on the eyes.
Ingestion Hazards:
May cause burns. Depending on the concentration and duration of exposure, aqueous
solutions can cause a strongly irritating or corrosive effect
Chronic Exposure:
Limited evidence of a carcinogenic effect. After lifelong inhalation exposure to
concentrations that were severely damaging to the nasal epithelium, nasal tumors were
induced in rats; in other species these findings were not found or were considerably
less pronounced.
Carcinogenic Effects:
Contains Formaldehyde, a known Human Carcinogen (Group 1), that can cause
cancer.
SECTION 4 — FIRST AID INFORMATION
Inhalation: Remove the individual to fresh air. If irritation persists, get medical attention.
Skin: Flush with water immediately. If irritation persists, get medical attention immediately.