This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
About GPS The Global Positioning System (GPS) is a constellation of satellites that a GPS receiver uses to calculate geographical positions. To determine a position, data from at least three satellites is required. To determine elevation, the data from four or more satellites is required. Accuracy of the positioning varies from 10 feet to several hundred feet, depending on vehicle placement and the surrounding environment.
Table of Contents 1. Your OverDryve™.......................................................................................................................................................................... 1 Caution: Important Safety Information......................................................... 1 Box Contents............................................................................................................ 2 Install the Mount..................................................................
1. Your OverDryve™ Caution: Important Safety Information Navigation Device • • Do not use sharp-edged objects on the device touch screen. • Protect the device from extreme temperatures. Operating temperature for the device is between 32 degrees F and 120 degrees F. • • Use this device at your own risk. Attend to this device only when it is safe to do so. Traffic laws and regulations always have priority over any instructions from the navigation system.
1. Your OverDryve™ Box Contents Install the Mount •1 OverDryve™ tablet Note: Follow all local regulations governing the placement of the mount. •2 Smart mount 1. •3 Anti-glare screen protector Select an area with a line of sight to the sky and GPS satellites. 2. Clean and dry the mounting area. •4 Bracket with suction cup 3. Remove the suction cup protective film. •5 FM transmitter antenna 4. Attach the two pieces of the mount together and lock into place. •6 Dash mount disc 5.
1.
1. 1 Swipe down to view notifications and settings 2 4 3 7 6 5 8 Your OverDryve™ Using the Android Home Screen After you turn on your device, the home screen will display. At the top of the home screen is the status bar. It displays important information like your Wi-Fi connection, remaining battery life, time, etc. The status bar will display at the top of almost every screen. Swipe down at the top of the status bar and your Notifications panel will display.
2. Getting Started Setup Connect to the Internet Enable the Wi-Fi hotspot on your smartphone or other in-vehicle device and then connect OverDryve™ or connect to your home Wi-Fi to complete setup. Register your device Register with Rand McNally for updates and support. Connect to Bluetooth Enable Bluetooth on your smartphone and pair OverDryve™ to enable hands-free calling and texting, music streaming, and voice assistance.
2. Getting Started Connect to the Internet First activate the Wi-Fi hotspot on your phone or in your truck. From the OverDryve™ setup screen, tap Get Started to begin the setup process. Tap Find my hotspot. Select a Wi-Fi network and connect. A message will display that states you are connected. Tap Next.
2. Getting Started Register Your Device Register your device to receive important device updates and support. Tap Next to proceed to the next step.
2. Getting Started Connect to Bluetooth Connect to your phone via Bluetooth to allow OverDryve™ to call and text hands-free and to stream music from your phone to your truck’s stereo system. First enable Bluetooth on your phone. From OverDryve™: 1. Tap Connect. 2. Tap Scan For Devices. A Bluetooth pairing request will display on your OverDryve™. 3. Tap Pair. If successful, the screen will display a connected message.
2. Getting Started Connect to Your Truck Stereo To listen to audio through your truck stereo, the tablet must be in truck mode. To put the tablet in truck mode, place it on the Smart Mount and plug the mount into a power source using the vehicle charger. The optimal way to connect to your truck stereo is with the provided AUX cord. You can also connect wirelessly via OverDryve’s FM transmitter. To connect with the AUX cable: 1. Tap Connect via AUX. 2.
2. Getting Started Connect to Your Truck Stereo (Continued) Using the OverDryve™ Speakers Your tablet has its own speaker, and there’s another powerful speaker in the Smart Mount. You can use the OverDryve™ speakers instead of connecting to your truck stereo. If you want to connect to the truck stereo later, tap the Settings icon in the top right corner of the screen, then OverDryve™ Setup > Audio.
2.
2. Getting Started From the Quick Settings panel, tap the Settings icon to access a full menu of settings for your device. Wireless and Networks • Wi-Fi – View and connect to available Wi-Fi networks. • Date Usage – View your Wi-Fi and app usage. • Bluetooth – Pair with your smartphone using Bluetooth. Device • Display – Set brightness, wallpaper, appearance, etc. • Storage – View how much storage is available on your OverDryve™.
2. Getting Started Personal • • • • • Location – View location mode, location requests, and location services. High accuracy mode is recommended. Security – View lock,password,encryption, and credential settings. Accounts – View and add accounts for the Rand McNally market. Language & input – Set language and keyboard information, as well as speech options and pointer speed. Reset Tablet – Reset the device to its factory settings.
3. Messaging Pair OverDryve™ with your iPhone or Android phone via Bluetooth to send and receive texts hands-free. The OverDryve™ Voice Assistant integrates with your phone’s voice assistant. OverDryve™ automatically syncs your text messages so you can see new messages and browse through old ones without reaching for your phone.* Note: If you have an iPhone, make sure your phone is not open to the messaging screen. When the messaging screen is open, the iPhone automatically marks the message as “read”.
3. Messaging To enable text message notifications: 1. From Messaging, tap the Settings icon in the top left corner of the screen. 2. Tap Settings. 3. If Enable Messaging Notifications is checked, notifications are already enabled. If not, tap to turn on the feature. The status will show “Enabled”. To control what text message information displays on OverDryve™: 1. From Messaging, tap the Settings icon in the top left corner of the screen. 2. Tap Settings. 3.
4. Phone Pair OverDryve™ with your iPhone or Android phone via Bluetooth to make calls hands-free. OverDryve™ automatically downloads your contacts and call history when you get in the truck. Set your favorite contacts by clicking the star icon next to their names. Easily access them in the favorites tab. To set the ringtone or notification ringtone: 1. From Phone, tap the Settings icon in the top left corner of the screen. 2. Tap Settings. 3.
5. Navigation How the Truck GPS App Works • When your tablet is attached to the magnetic mount, the Truck GPS boost within the mount will provide accurate GPS location, even without a Wi-Fi connection. • Weather, traffic, fuel prices, local search within the Truck GPS app (including hands-free navigation), and device updates require a Wi-Fi connection. • To exit the Truck GPS app at any time, swipe down from the top of the screen or up from the bottom to view the Android menu bars.
5. Navigation Main Menu Basic Map View 1 2 1 Search For an Address Tap to type in any address or search by keyword. Compass Direction 2 Tap to change the map display. An icon displays the selected option: North up (N), heading up (arrow), or 3D. 3 4 5 6 3 ` 4 Route Distance Reflects the distance from your point of origin to your destination. 5 Zoom Out Tap to zoom out. 6 Map View Tab Tap to expand the map screen.
5. Preferences • Tap and to view the options. • Tap the option to be set. • Tap Back • General Preferences Manage Custom POIs Select a Category to Edit Hide All Icons on Map Go to Map Mileage Log Truck/Bus Only Car Only Truck & Car Don’t Log Mileage Screen Click Click Off Click On to save changes. General Preferences Options Options My Custom POIs Enter the new information.
5. Preferences - continued Route Preferences General Preferences Options Toll Prompt/ Notification Enabled Disabled Clock Setting 12-Hour Clock 24-Hour Clock Contact & About Tap to show version information and copyrights. Route Preferences Options Turn Announcements Set three distances at which you want to be warned about an upcoming turn. The first announcement will be the farthest from the turn and the third the closest.
5. Navigation Preferences - continued Map Preferences Options Map Preferences Options .Map Style Light Dark High Contrast Map Auto Zoom Off On, Auto Scale On, Street Scale On, City Scale On, State Scale Address Book Icons Off On Set to auto scale to keep the current vehicle position and the next turn in the map view at all times. Set to street/city/state scale to specify the maximum scale of the zoom.
5. Navigation Preferences - continued Warning Preferences Warning/Alert Prompts Auto Dismiss Warnings Options None Audio & Visual Visual Audio Never After 2 Seconds After 10 Seconds After 30 Seconds Warning Preferences Options Warning Display Size Full Screen Small Bar Toll Booth Alert Set warning distance to toll booths by using the + and - buttons. Construction Area Set warning distance to construction areas by using the + and - buttons.
5. Navigation Search For an Address 1. Tap the search bar at the top of the Navigation screen to type in any address or search by keyword. Or, tap any of the categories to search for specific types of destinations. 2. Once a destination is entered, tap Navigate and your route options will display. 3. Select either the fastest route or an alternate route. 4. Tap Start Navigation to begin the route.
5. Navigation Helpful Tips on Entering Addresses Auto-Complete Feature Enter the first few characters in a name and a short list displays names that start with the typed characters. Continue entering characters until the searched-for name displays in the list. Tap the name to select it. Cities Cities with common names, such as “Athens”, may have multiple locations. The tablet will list all locations.
5. Route Map Window 1 6 2 3 4 5 6 7 9 11 13 8 10 12 14 15 16 17 Exit Quick View Tap to view POIs along the exit ahead. 7 Live Data Tap to view fuel, weather, and traffic along the route. 8 Zoom In Tap to zoom in. ` 9 Route Distance Reflects the distance from your point of origin to your destination. 10 11 18 Zoom Out Tap to zoom out. Speed Limit Tap to open a “Tell Rand” message about speed limits. 12 Map View Tab Tap to minimize the icons displayed. Tap again to switch back.
5. Navigation View Directions Detail View Route Display Options 1 2 When first opened, the slide-out list displays in Detail View showing each maneuver. Use and to view the instructions. To change the route display, choose Detail View, Highway View, Trip Summary (for multi-stop trips), or Map View (to view the route from start to finish). 1 Distance Displays the distance for each road segment.
5. View Directions Continued Trip Summary View (for multi-stop trips) 1 Total Distance and Time Displays the total distance and time for the entire multi-stop trip. 1 3 2 4 2 Leg Number of the leg (for multi-stop trips) and distance. 3 Destination Destination for that leg of the trip. 4 Map View (entire route) OverDryve™ Pro User Manual Navigation Remove Stop Tap to remove the stop from the trip.
5. Navigation Exits Quick View Slide out to show Points of Interest and amenities at upcoming exits. The list displays the distance to the next exit, exit number, and a count of available amenities. 1. Tap an exit to bring up a list of POIs and amenities at that exit. 2. Tap All, Fuel, Food, or Hotel to display locations by category. 3. Tap any item in the list to route to that location.
5. Navigation Virtual Dashboard To show the Virtual Dashboard, tap the Virtual Dashboard icon or the Current Speed. 1 Gather trip information for up to three trips. Includes odometer settings, hours, and speeds. 2 Return to the Route Map Window. 3 Sunrise and sunset times based on vehicle location (latitude/longitude) and day. 4 Current speed NOTE: Turns red when speed limit warning exceeded. Tap here 2 12 5 3 1 6 5 Elevation at current location.
5. Navigation Manually Reset Trip Information To manually reset trip information: 1. Tap the tab you want to reset (1, 2, or 3). 2. To set the odometer for the selected tab back to zero, tap Reset. Information is captured as you travel the route. Automatically Reset Trip Information To reset trip information after the vehicle has remained stationary after a specific number of hours: 1. Tap the tab you want to reset (1, 2, or 3). 2. Tap Auto Reset. 3. Tap 4. Tap to increase the number of hours.
5. Navigation Traffic NOTE: This feature requires a Wi-Fi connection. 1 To view current traffic information along your route and near your location: 1 2 3 4 5 Tap Live Data > Settings on the map screen. Tap the Traffic radio button to display the traffic overlay on the map. 2 Tap the Traffic tab. 3 The Traffic tab displays traffic events along your route. 4 Use the Flow and Incidents checkboxes to view or hide each type of traffic events 5 Tap the X to return to the map.
5.
5. Navigation Weather • This feature requires a Wi-Fi connection. • Weather display depends on active weather patterns and map zoom level. • 1 2 3 4 The refresh speed of the weather display is dependent on the connection speed. Weather information is updated every few minutes while the Wi-Fi connection is active. To view current weather information and the three-day forecast for your location, tap Live Data > Settings on the map screen and tap the Weather tab.
5. Navigation Fuel Prices Note: This feature requires a Wi-Fi connection. To show fuel prices, tap Live Data on the map screen and tap Settings > Fuel Prices. 1 2 OverDryve™ Pro User Manual 3 4 5 1 Displays stations and prices, with distance as the crow flies. 2 Check to show the icons and prices on the map screen. 3 Sort by distance. 4 Apply filters for type of fuel and specific brand. 5 Check to show fuel prices along the route.
5. Navigation Route to Here, Set Origin, Add as Via You can drag the map with your finger to move it to another location. The crosshairs will display when you move the map. Place the crosshairs over the location you are looking for. When you find the location, press and hold the screen for a few seconds and choose Route to Here, Set Origin, or Add as Via. 1 3 5 OverDryve™ Pro User Manual 2 1 Crosshairs Drag the crosshairs over the desired location.
6. Truck Tools Truck Tools Note: Some features are not available in Truck mode. Truck Info: Enter truck information (weight, length, etc.). Status, Trails, Mileage, and Fuel: View driving, on-duty, and maintenance timers; state logs; trails;and fuel purchase information. Motor Carrier’s Road Info: Quickly access contact information for emergency and local regulatory agencies. Fuel Manager: Track fuel efficiency, usage averages, maintenance, and repairs. Requires a separate account.
6. Truck Tools Status Note: Odometers count up and record the current mileage. Maintenance counters count down. When a maintenance timer counts down to 2,000 miles, a reminder displays each time the TND starts. 1. Tap Truck Tools. 2. Tap Status, Trails, Mileage, and Fuel. 3. Tap the Status tab. Tap a field to make adjustments to mileage. The mileage continue to count down from the changed value. 1. Tap -- to decrease the setting. 2. Tap + to increase the setting. 3.
6. Truck Tools Mileage 1. Tap Truck Tools. 2. Tap Status, Trails, Mileage, and Fuel. 3. Tap the Mileage tab to view list of logs for the current year, ordered by quarter. 4. To view quarterly mileage logs for previous years, tap Year. Tap on a quarter to view log entries. 5. Tap on a quarter to view details. Tap View by Date/View by State and Empty/Loaded for more information. To delete a log, tap on the Tap Yes to delete the log. next to the log entry to be deleted.
6. Truck Tools Trails Use Trails to record a “bread-crumb” path of GPS coordinates where your truck has traveled. 1. Tap Truck Tools. 2. Tap Status, Trails, Mileage, and Fuel. 3. Tap the Trails tab. 4. To record a trail, tap New Trail. 5. To end the trail, tap the pause icon on the map screen. 6. The trail is recorded in the Trails tab. 7. Tap on a trail to view details. 8. Tap Show on Map to display the trail on the map screen. 9. Tap Edit Name to change the name of the trail. 10.
6. Truck Tools Fuel Logs 1. Tap Truck Tools. 2. Tap Status, Trails, Mileage, and Fuel. 3. Tap the Fuel tab to view a list of fuel logs by quarter. 4. Tap +Fuel to record the date, location and cost of fuel purchase. 5. Tap on any field to edit. 6. Check Taxable to include the purchase in the fuel log. 7. Tap Save (Note: Fuel economy is calculated automatically.) 8. Once fuel purchases have been entered, tap on a quarter to view the details. 9. You can View by State or View by Month. 10.
7. DriverConnect DriverConnect The DriverConnect app provides a fully-compliant electronic logbook solution. DriverConnect lets you track and log Hours of Services,DriverVehicle Inspection Reports, Fuel purchases, and more. Reports can be generated for roadside inspections. The DriverConnect app connects to a Rand McNally Electronic Logging Device (ELD) over a Bluetooth connection.
8. 1 2 3 4 5 6 7 8 TripMaker TripMaker is a trip planning app that allows you to easily browse the map and set up a multi-stop trip. Add via points and send your trip to the GPS app for routing. To access TripMaker, tap the app tray, swipe to the right to view the second app screen, then tap the TripMaker icon. To create a trip: 1. Enter the starting and ending point for your trip. 2. Choose a name for it. 3. Tap Create Trip.
9. 2 Road Atlas The Rand McNally Road Atlas is a digital version of Rand McNally’s Road Atlas. 1 Legend Tap Legend at the top right of the screen to view the roads and related symbols. Maps Tap Maps at the top right of the screen to select pages by state/ area. You can also update maps here.
10. Cameras Your OverDryve™ tablet includes a built in dash cam; the lens is in the back of the device. The Wi-Fi backup camera accessory is sold separately.
10. Cameras Dash Cam The Dash Cam records a video loop as you drive. Tap the red button to start or stop recording. Records Video Use the settings icon in the upper right corner of the camera screen to access preferences for video quality, audio, and segments. Video Files You can record sound and use an external storage device to keep longer videos. Use the table below to choose Quality, Segments, and Length based on the space used.
11. Entertainment There are four options for listening to music, podcasts, audiobooks, etc.: 1. Stream music from your smartphone via Bluetooth. Access the audio controls in the Bluetooth Player. 2. Stream music right from OverDryve™ by downloading music apps. 3. Download mp3s or other types of audio files. Access the audio controls in the Media Player. 4. Listen to SiriusXM satellite radio. You can activate the FM Transmitter to listen to audio through your speakers.
11. Entertainment FM Transmitter The FM Transmitter makes it easy to listen to music from OverDryve™. Just tap Entertainment > FM Transmitter > On. Tune your truck radio to an open FM station and you’re set. Finding the Best Station In order to get the best possible reception from the FM Transmitter on your truck stereo, you need to find the best FM frequency to transmit to. The best frequency to use is one where no FM radio stations are currently broadcasting on or near.
11. Entertainment SiriusXM Radio Your OverDryve Pro tablet comes with a SiriusXM radio app pre-installed. To access SiriusXM,, tap Entertainment > SiriusXM. The SiriusXM antenna cable must be installed, and the tablet connected to the Smart Mount. Antenna Cable Routing When routing antenna cable, always be careful to include enough slack in your cable to accommodate open doors and driver space.
11. Entertainment SiriusXM Functions Direct Tune Tap to display the Direct Tune interface. Up (>) / Down (<) Click Up (>) / Down (<) to switch to the next available station. Related Displays similar genre channels based on the currently playing channel. FFW, RRW, Pause/Play, LIVE Fast forward (FFW, >>) and fast backward (RRW, <<) buttons play the songs as buffered (up to 30 minutes) within the selected station in its entirety. Pause button stops the music play without skipping any music stream.
11. Entertainment Direct Tune Scroll to the left or right, or tap the buttons, to scroll between available stations. You can also type the station number to navigate directly to that station. Tap a station icon to listen. Tap the X to close Direct Tune. Smart FAVORITES You can set up to 15 presets,or Smart FAVORITES,in three scrollable panels. Tap and hold a Smart FAVORITES icon to set the station. Tap and hold again to: Replace: Set a new Smart FAVORITES channel over the existing one.
12. Rand McNally has designed OverDryve™ for speed and reliability. However, from time to time, all Android devices run into problems. If your unit becomes unresponsive for any reason, it’s always best to restart the unit by turning it off and on again. Restarting the Device 1. Restart the unit by holding down the power button for 3 seconds, or until you see the Power Off screen. 2. Press Power Off. 3. Once the unit has shut down, press and hold the power button for 2 to 4 seconds to turn it back on.
13. More Information For more information OverDryve™ Pro User Manual • Rand McNally Website • Support • Accessories • Facebook randmcnally.com/overdryve randmcnally.com/support store.randmcnally.com facebook.
Trademarks OverDryve™ is a trademark of RM Acquisition, LLC, d/b/a Rand McNally. InfoGation is a registered trademark of InfoGation Corporation. Local search information provided by CityGrid Media. Weather data provided by myweather.com. Fuel prices provided by OPIS. Traffic information provided by INRIX, Inc. © 2017 Rand McNally. © 2017 HERE. All rights reserved.
Warnings, End-User License Agreement, and Warranty Pay attention to road conditions and street signs, and obey all traffic and safety laws. Traffic laws and current traffic conditions must always be observed and take precedence over the instructions issued by the Rand McNally® navigation system. The User should be aware of situations where current traffic conditions and the instructions from the navigation system may be in conflict.
Warnings, End-User License Agreement, and Warranty CAUTION: RAND MCNALLY MAKES NO WARRANTY AS TO THE ACCURACY OR COMPLETENESS OF THE INFORMATION IN THE PRODUCT, THE SOFTWARE OR THE DOCUMENTATION, AND DISCLAIMS ANY AND ALL EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTY AS TO QUALITY, PERFORMANCE, TITLE OR NON- INFRINGEMENT.
VIP Customer Support Questions about using OverDryve™? Our team is ready to help. Call toll-free: 800-237-7270 E-mail: support@randmcnally.