INFORTAP-READY USER MANUAL Version 2.
ESL Introduction Electronic Shelf Label System (ESL) provides product information by replacing series of task which is printing attaching price, and merchandise information in paper to electronic display. Manual Content 1. InforTab-Ready Preparation 1-1 InforTab-Ready Composition Check …p.3 2. 1-2 Network, UI Setting …p.4 1-3 Confirm InforTab Assign …p.6 InforTab Update 2-1 Confirm InforTap Layout …p.7 2-2 Update Product Information …p.8 2-3 Confirm InforTap Update Result …p.9 3.
1. InforTab-Ready Preparation In order to set and monitor InforTab-Ready, Personal computer with network is required. 1-1 InforTab-Ready Composition Compositions of InforTab-Ready are, • 1.54 Inch InforTab(R154) 1EA • 2.13 Inch InforTab(R213) 1EA • 2.90 Inch InforTab(R290) 1EA • 4.20 Inch InforTab(R420) 1EA • 7.
1. InforTab-Ready Preparation 1-2 Network, UI setting PC Network setting For connecting Gateway and User. Gateway IP is set by 192.168.220.236 in advance. Setting a PC network fixed IP is required. For instance, 192.168.220.45 can be set as PC network IP.
1. InforTab-Ready Preparation Connect InforTap UI 1 Plug in Gateway with power cable, and connect to PC by LAN cable. If all of these connected properly, Red, Green, and Blue lights will go on. 2 Run internet browser in PC, and write Gateway fixed IP (192.168.220.236) on address bar. 3 If connected properly, InforTab UI screen will appear. 4 Change Password in Menu ‘Account Setting’. Initial ID is ‘admin’ and password is ‘1234’.
1. InforTab-Ready Preparation 1-3 InforTab Assign InforTab and specific product work together showing the product information. This system is operated by ‘Assign’ process. Assign confirmatory InforTab-Ready’s 4 InforTabs are already assigned. Assigned InforTap in Gateway can be verified by ‘Status > Tag’ in UI.
InforTap Mac Address check InforTab Mac address is displayed as barcode when you press ‘>’ or ‘<’ buttons of remote controller in front of tag. Assign: Connect Delete 2 digits and leave 4 digits from the back in order InforTab and to search Mac address in UI. Product in Gateway. Update: To change For further more explanation, if Mac address is ‘78E980FFFE004C4B’, can be searched by ‘004C’. product information withAssigned InforTab De-Assign: Disconnect InforTab and Product in Gateway.
2. InfoTab Update 2-1 Confirm InfoTab Layout InforTap Layout can be found at ‘Product Update’ menu. : Layout choice : Layout look preview Layout is location of information and design which shows in tag display. It can be adjusted in ‘Layout Designer’. We provide ‘Layout Designer Manual’ in addition which guides how to use ‘Layout Designer’.
2. InfoTab Update 2-2 Product information Update Product Update window is as below picture. 1 Choose proper Layout and put appropriate InforTab information. 2 Check the square box in the right side and click ‘Update’ in the bottom side of page. 3 InforTab-Ready User Manual Press ‘Okay’ to confirm the procedure.
2. InfoTab Update 2-3 Confirm InfoTab Update Result After the update, the page automatically moves to ‘Task’ menu in UI and it is available to check update status in real time. InforTab update generally completes in 5 minutes, but time it can be delayed by network circumstance. To make InforTab update on purpose, Remote Conroller. After flicker light, update process will be operated when press the ‘R’ button of remote controller.
3. InforTab De-Assign, Re-Assign 3-1 InforTab De-Assign ‘De-Assign’ is process that to de-assign InforTab and product from Gateway. De-assigned InforTab cannot be updated unless re-assign it back. For de-assign, select ‘Status > Tag’ menu in UI and press ‘De-assign’. 3-2 InforTab Re-Assign If need to update back, ‘Re-Assign’ work is required. Choose ‘Status > Tag’ Menu in UI and click ‘Assign’. After click ‘Assign’ button, write down the InforTab Mac address and product code.
4. Appendix 4-1 Wireless Network Circumstance InforTap system uses two channels of wireless 2.4GHz, so that it can effect updating speed of InforTab according to wireless network environment. Wireless Channel According to wireless circumstance, InforTab system may not be operated properly by influence with other wireless instruments. In this case, changing channel is required.In order to change channel, click ‘Gateway Config’ menu in UI and press ‘Setting’ Icon in right side of the page.
. Date channel, Event channel are composited with 11~26 channels.. Begin with 11 channel and go up until finding a proper one. Press ‘Save’ button to confirm the channel.
Information to user WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules.
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.