Instruction 2 Z。ne WiFi Water Timer with WiFi Hub M。del: TTV203WRF + TWG004WRF Cust。mer Supp。t US Free H。tline: +1-833-3815659 Email: sevice@rainpointus.com Facebook: @Rainpointglobal RAINPOINT ® www.rainpointus.com *SAVE THIS MANUAL FOR FUTURE REFERENCE.
WELCOME TO RAINPOINT RainPoint is pleased to present the 2 Z。ne WiFi Water Timer with WiFi Hub (M。del: TTV203WRF + TWG004FRF)-a smat sub-zone watering timer system for residential applications. Designed with the needs of the customer in mind, the model offers 2 high flow valves to water separate areas, simplified APP programming and an impressive range of features typically found in WiFi water timers costing twice as much. While it’s affordable, the model is without a doubt a professional grade product.
TABLE OF CONTENTS INTRODUCTION 1-4 CONTENTS IN THE BOX 01 PRODUCTS OVERVIEW 02 TTV203WRF 2 Z。ne WiFi Water Timer Manual Power ON/OFF SMART AUTOMATION Automation & Tap-to-Run HOME MANAGEMENT TWG004FRF WiFi Hub 04 FEATURES OVERVIEW INSTALLATION 5-10 STEP 1. INSTALL APP ON YOUR PHONE 05 STEP 2. CONNECT THE WIFI HUB 06 STEP 3. CONNECT THE WIFI TIMER 07 STEP 4. INSTALL THE WIFI TIMER 09 STEP 5.
INTRODUCTION CONTENTS IN THE BOX A. 1 x TTV203WRF 2 Zone WiFi Water Timer B. 1 x TWG004WRF WiFi Hub C. 1 x Instruction Manual D. 1 x Quick Setup Guide A B C D FCC N。tice: This device generates radio frequency energy and may cause inteference to radio and television reception.
PRODUCTS OVERVIEW TTV203WRF 2 Z。ne WiFi Water Timer Water Inlet Left Zone Button Right Zone Button Right Zone Watering Indicator Battey Compatment Left Zone Watering Indicator Right Water Outlet Left Water Outlet Specificati。n Range Between WiFi Hub and Timer: 160 ft in the open area without inteference Working Water Pressure : 0.5 bar to 8 bar(7.25-116.03PSI) Temperature Operating Range : 1。C - 50。C (33.
TWG004WRF WiFi Hub Hub Button Power Indicator WiFi Socket with Power Power Plug Specificati。n Range Between WiFi Hub and Router: 160 ft in the open area without inteference Temperature Operating Range: 1。C - 50。C (33.8。F-122。F ) WiFi Frequency Band: 2.4Ghz Only Input: 220-240V 、 50Hz 、16A For Indoor Use Only Only applicable to 2.4Ghz WiFi. If your router is a dual-band router, please independently enable the 2.4GHz WiFi band and name it differently from the 5GHz WiFi band.
FEATURES OVERVIEW wifi wifi 2.4G only wifi CLOUD RF wifi RF ROUTER 1) WiFi Rem。te C。ntr。l: Connect with 2.4GHz WiFi, set and check irrigation schedule by APP. 2) 2 Water Outlets: Watering schedules can be set independently in different zones. 3 ) WiFi S。cket: The WiFi Hub can be use as WiFi socket. 4) Manual Watering: Manually turn on/off watering and set watering time. 5) Watering 。n Schedule: Each zone can set up to 3 separate watering programs per day.
INSTALLATION Tips: Please scan the QR code or search the link to access the setup video or FAQ to install the device quickly and easily. Setup Vide。: www.rainpointus.com/pages/playlist FAQ: www.rainpointus.com/downloads/faq Setup Video FAQ STEP 1. INSTALL APP ON YOUR PHONE Rainpoint 1. D。wnl。ad the RainP。int App Search for ”RainPoint” on Google Play or App Store or scan the QR code to download the Rainpoint APP. 2.
STEP 2. CONNECT THE WIFI HUB 1. Plug y。ur WiFi Hub t。 an ind。。r p。wer s。urce near your WiFi router and the outdoor outdoor location of your timer. 2. Open RainPoint App and tap ”Add device” or ” ” to add a new device. 3. Tap ”Smat lrrigati。n” and ”Add Manually”, then select ”Irrigati。n Hub” 4. select 2.4Ghz WiFi, and enter the password. Tips: If your router is a dual-band router, and you cannot identify the 2.4Ghz or 5Ghz WiFi, please tap the blue words ”C。mm。n r。uter setting meth。d” to name the 2.
5. Press and hold the WiFi hub button until the power indicator blink rapidly (2 times per sec。nd). Then select ”c。nfirm indicat。r rapidly blink” and tap Next. The APP will search and pair your WiFi hub automatically. N。te: If the indicator doesn’t blink rapidly (2 times per second), please tap ”Resetting Devices” and follow the prompts (Or refer to the ”RESET THE DEVICE” secti。n of this manual) to reset the WiFi hub and make the hub indicator blink rapidly. 6.
2. Return to the APP home screen, and tap ” ” to add the WiFi timer. 3. Tap ”Smat lrrigati。n” and ”Add Manually”, then select ”WlFl 2-Z。ne Smat Water Timer” 4. Press and hold the left butt。n on the timer until the left and right indicators blink rapidly at the same time (2 times per sec。nd). Then select ”confirm indicator rapidly blink” and tap Next. The APP will search and pair your WiFi timer automatically.
STEP 4. INSTALL THE WIFI TIMER Timer Inlet 160 feets (No bushes, walls blocking) Timer Outlet 1. Attach the timer inlet to the outdoor faucet/spigot (hand tighten only). From the timer outlet connect a drip irrigation system or a garden hose. WARNING: * The WiFi timer can only be used for cold water. * The WiFi timer uses a 433mHz RF connection to communicate with the WiFi Hub, and must be within a 160ft range, line of sight, of the WiFi Hub.
STEP 5. TEST BEFORE USE C。ngratulati。ns, you have completed the connection and installation of the 2 zone WiFi water timer. Please test whether the internal valve of your water timer is normal before using it. 1. Keep the faucet turned off. 2. Press and hold the left/right zone button of the timer for 3-5 seconds, with a ”click” sound, the left/right zone valve inside the timer opens for manual watering.
APP PROGRAMMING APP HOME SCREEN L。cal Weather F。recast H。me Management Get your local weather forecast from website to realize intelligent watering. You can locate your home, customize the home name and add family members. It is convenient for you to manage irrigation schedules for different residences. All Devices Add Devices A check list of all the devices you have You can add multiple RainPoint devices on the APP to create a smat home irrigation system. connected.
2- ZONE WIFI IRRIGATION TIMER Tap the 2-Zone WiFi irrigation timer on the all devices list of APP home screen. It will display all the parameters and functions of the timer manually set on the APP. N。te: The WiFi timer will f。ll。w and pef。rm the preset watering schedule after applicati。n set successfully, even if the ph。ne 。r device l。ses netw。rk c。nnecti。n.
·H。w t。 get third-paty c。ntr。l / v。ice c。ntr。l? If you have an Amaz。n Alexa 。r G。。gle Assistant, please tap the icon ” ” in the upper right corner of the device page, select a third-paty voice control device you own, then tap the operation guide, and follow the instructions to connect your WiFi water timer to the voice control device. After successfully connecting, you can control the WiFi water timer by voice.
Watering Plan & Manual Rain Delay Z。ne 1 / Z。ne 2 Select Zone1 or Zone2 for manual watering. Z。ne 1 c。ntr。ls the left valve 。f the timer. Z。ne 2 c。ntr。ls the right valve 。f the timer. Watering Day Of The Week Each plan has a specific c。l。r punctuati。n. The punctuation in a specific color on the day of the week indicates that there is a corresponding watering plan for that day. Plan A / Plan B / Plan C Each ZONE can set 3 different watering plans evey day.
Irrigati。n M。de 3. Tap Irrigation Mode. 4. Use the 24H time switch to toggle between 24hr and AM/PM time. 5. Tap Stat time to open the clock and set a stat time. 6. Tap Durati。n(H:M) to set a watering duration (from 0 hour 0 minute to 11 hours to 59 minutes). 7. Select the days to repeat watering evey week as needed. 8. Save your settings. F。r example: The picture on the left shows that the WiFi water timer will water for 2 hours in irrigation mode.
WiFi S。il Sens。r & Water Fl。w Meter WiFi S。il Sens。r (s。ld separately, n。t included) If you have a Rainpoint WiFi soil sensor, you can pair it with your Rainpoint WiFi water timer and WiFi hub. Each z。 ne can be paired with 。ne WiFi s。il sens。r. And the soil temperature and moisture data monitored by the soil sensor will be displayed on your Rainpoint APP. The s。il sens。r can als。 c。ntr。l the watering schedule 。f the timer.
WIFI SOCKET Manual P。wer ON/OFF 1. Tap the WiFi S。cket on the all devices list of APP home screen. 2. Tap the P。wer to toggle the WiFi socket power on or off. N。te: Each RainPoint WiFi hub can be used as a WiFi socket. But 。nly when the WiFi timer is successfully paired with the WiFi hub, the WiFi s。cket device can be added t。 the APP. 1. Tap the Timer on the WiFi Socket screen. 2. Tap the Add Schedule to setup a schedule for the WiFi Socket. 3. Use the cl。ck wheels to set the desired switch time of day.
Aut。mati。n & Tap-t。-Run Aut。mati。n means the devices can execute automatically according to the set conditions such as the local weather, device status and time. For example, RAINPOINT APP can obtain the weather forecast information of your home location. When you set the conditions for immediately delaying the watering plan when it rains, the timer will automatically execute the watering delay when it rains in your local area.
H。w t。 set the aut。matic rain delay? 1. Tap Smat at the bottom of the APP home screen. 2. Select Aut。mati。n and tap Create Scene. 3. Set a condition when the weather changes t。 rain. N。te: Please accurately l。cate the city where y。ur h。me is l。cated. The APP will automatically obtain weather forecast data based on the city you locate. When the weather forecast turns to rain, the conditions for execution will be triggered. 4. Tap Run the device to set up a task about device operation. 5.
7. Select the trigger condition of your condition to be when all c。nditi。ns are met or when any 。ne 。f the c。nditi。ns is met. If there is only one trigger condition, there is no need to set it here. 8. Check your execution conditions and tasks. 9. Save your settings. F。r example: The picture on the left shows that when it rains in New York, the left and right valves of the 2-Zone WiFi irrigation timer will be automatically closed, and watering will be delayed for 24 hours.
SMART AUTOMATION Rainpoint suppots adding family members and sharing your home device to achieve co-management the home irrigation system with your family. 1. Tap Me at the bottom of the APP home screen. 2. Select H。me Management. You can set the current home or create a home or join another home. 3. Set your h。me name, r。。m management and h。me l。cati。n. N。te: Home location is related to the weather forecast information obtained by the system. 4.
RESET THE DEVICE H。w t。 reset the WiFi Hub ? Step 1. Power OFF or Remove the WiFi Hub from the power source. Step 2. After 10 seconds, power on or plug the WiFi hub to the power source. Step 3. Press and hold the middle button on the WiFi hub without releasing the button until the indicat。r light quickly fashed (2 times per sec。nd), then the WiFi hub is restored to pair mode. Search the link below to visit the WiFi Hub resetting video https://rainpointus.
TROUBLESHOOTING Pr。blem P。ssible Cause P。ssible S。luti。n Can’t turn 。n /。ff the valve Low battey Impurities in water inlet Unstable network or delayed response. Replace fresh batteries Regularly clean the filter pot of impurities to avoid disruptions in use. Wait a while and ty again. lnaccurate water f。w meter Inaccurate statistics due to tilted mounting angle.
The meaning 。f LED light LED indicat。r c。l。r 。f TTV203WRF WiFi water timer 1. P。wer-。n reset: The red and white lights flash alternately 4 times when the machine is turned on. 2. Rest。re fact。y settings: Press and hold the timer button while turning on the timer, release the button after the red light flashes, and the timer will enter the factoy reset state. 3. Irrigati。n status: The white light flashes for 3 seconds and lights for 200mS, indicating that the timer is in irrigation status. 4.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
US Free H。tline: 1-833-3815659 Email: sevice@rainpointus.com M。del NO.: xxxxxxxxxx(On the timer label) LOT NO.
