Setup guide

ManualsBrandsRADVision ManualsTV AccessoriesScopia XT5000 Series

RADVISION, an Avaya Company| Release Notes SCOPIA XT4000 and XT5000 Series | 1

Release Notes

SCOPIA XT4000 and XT5000 Series

Version 3.1.0.28

Table of Contents

Product Highlights ....................................................................................................... 3

Graphical User Interface .............................................................................................. 3

Supported Languages .................................................................................................. 4

Web Interface ........................................................................................................... 4

Multi-Homing Network ................................................................................................. 5

HD Monitors ............................................................................................................. 5

Video Layouts ........................................................................................................... 5

Video Inputs ............................................................................................................. 6

SCOPIA XT5000/XT4000 Series - Version 3.1.0.28 ................................................................. 7

What’s New .............................................................................................................. 7

Embedded MCU and SCOPIA XT Desktop ............................................................................................................................... 7

Web Video ............................................................................................................................................................................. 8

Wake Up and Turn Off Displays on HDMI .............................................................................................................................. 9

Geo-Localization .................................................................................................................................................................... 9

Graphical Interface Enhancements .................................................................................. 9

Preset Management ............................................................................................................................................................ 10

Local Contacts Management ............................................................................................................................................... 11

Activation of Advanced Settings .......................................................................................................................................... 12

Restriction of Basic Settings with PIN code .......................................................................................................................... 12

Do not disturb status ........................................................................................................................................................... 13

MCU pages .......................................................................................................................................................................... 13

Other GUI enhancements..................................................................................................................................................... 15

Enhancements.......................................................................................................... 15

Languages............................................................................................................................................................................ 15

Video and Presentation ........................................................................................................................................................ 15

Audio ................................................................................................................................................................................... 16

Contacts Directory Management Enhancements ................................................................................................................. 17

Networking .......................................................................................................................................................................... 17

Upgrading to this Release ............................................................................................ 19

Resolved Issues......................................................................................................... 20

Known Issues ........................................................................................................... 21

Summary of content (25 pages)

PAGE 1
Release Notes SCOPIA XT4000 and XT5000 Series Version 3.1.0.28 Table of Contents Product Highlights ....................................................................................................... 3 Graphical User Interface .............................................................................................. 3 Supported Languages .................................................................................................. 4 Web Interface .................................................
PAGE 2
Common Menu Shortcuts .............................................................................................. 24 Additional References .................................................................................................
PAGE 3
Product Highlights Graphical User Interface The new GUI in SCOPIA XT5000 and XT4000 Series products has been developed to offer intuitive use, maximum ergonomics and high usability experience. The graphics is displayed on the full screen video image using transparency levels for menu and information. At first system startup, a quick setup wizard will guide you through four basic installation steps: • • • • Welcome: Insert system name; select your country and your preferred language.
PAGE 4
• • • • Present: Activate a local presentation. The presentation will be automatically activated when the PC output signal is detected, by connecting a PC to the DVI input of the system. Control Camera: Change video input, move the camera, activate video privacy before a call, store and recall camera presets. Configure: Check information about your system and system status. Configure basic systems settings. You can also repeat the quick setup steps if needed.
PAGE 5
Note: XT5000 Web UI is tested with the latest browser versions available at the time of release. The following browsers are supported: IE7+, Google Chrome 11+, Firefox 3.6+, Safari 5+ and Opera 11+. Multi-Homing Network SCOPIA XT5000 and XT4000 Series are equipped with two 10/100/1000 Gigabit Ethernet interfaces (GLAN1 and GLAN2). You can use both ports for connecting to a private and public network, or to two different private networks (two different private ranges - according to RFC1918).
PAGE 6
When in a meeting, an additional Layout page in the Meeting panel allows to change the Continuous Presence layout (video participants you can see and transmit to all the connected sites).
PAGE 7
SCOPIA XT5000/XT4000 Series - Version 3.1.0.28 This section of the release note describes the new features and capabilities included in the SCOPIA XT5000/XT4000 Series software version 3.1.0.28 since previous version 3.0.132. Please note that upgrading to version 3.1.0 requires a new license key. Warning: Note: After loading this version over an earlier version, the completion of the upgrade procedure may require up to two upgrade phases and two corresponding automatic re-boots.
PAGE 8
- It is not possible to add H.263 participants while in a conference Lecturer mode is not supported Such limitations will be removed in a future firmware version XTD Server minimal installation requirements are: Note: OS: Window Server 2003/2008 RAM: 2G Disk: 20G CPU: Dual Core Intel Pentium E5400 2.70GHz NIC: 100 Mbit Please refer to XTD Server setup guide for more details.
PAGE 9
Wake Up and Turn Off Displays on HDMI Consumer Electronic Control (CEC) is a technology that allows different components in a system to discover and communicate with one another. In this version CEC can be used to automatically turn on and off the Monitor(s) connected to the XT Codec Unit, avoiding the use of Monitor’s remote control.
PAGE 10
Preset Management Using the local GUI is now easier to store and recall up to 10 presets. In Control Camera, press OK for other options, then select Presets. When controlling your local camera, you can assign, select and delete presets. Assigned presets are marked with a blue indicator. • To – – – • To delete an assigned position: – Press a numeric key [0..9] to select a blue position. Selected position indicator blinks. – Press C to clear the assigned position. The blue indicator is cleared.
PAGE 11
Local Contacts Management From the local GUI is now possible to add, modify and remove contacts from the Local Directory. To add a new Contact, in Contacts page press Add: Insert the contact person name or (conference name, see next section) and its details.
PAGE 12
Insert the endpoint number/address and detail (call rate, SIP/H323/ISDN protocol, Audio or Audio/Video call). If this contact person is reachable at multiple endpoints, repeat the Add Number step for all their numbers (for instance Office number, Home number, Room1 number…) To modify an existing contact, select the contact and press right arrow. A page with details for the contact appears. You can add a number for the contact, delete the contact itself or modify details for existing numbers.
PAGE 13
To change Basic Pin, go to Advanced>Utilities>PIN Protect Settings>Basic Settings> Yes. Insert a 4-digit PIN and confirm it. It is also possible to define a renewal option for the Basic Access PIN. – PIN Protect Renewal = “Always”: user must insert PIN at any access – PIN Protect Renewal = “n Minutes”: user must insert PIN only when accessing again after “n” Minutes. Do not disturb status In the main page, a message is displayed when the system is in Do Not Disturb (DND) mode.
PAGE 14
• You can add a participant with a direct call, or from the list of the recent calls. • You can browse your local or preferred remote contacts.
PAGE 15
Statistic page has also been improved to give a clearer and compact visualization Other GUI enhancements • Automatic hide of Top Header Bar in a call, after 15 seconds. – Header reappears if Mute, Privacy, DND, Far Camera ctrl are activated • Automatic closure of Stats and Layouts pages on call disconnection • Automatic resizing of button text in available space (font is smaller). Enhancements This version introduces many enhancements. Following sections describe the main ones.
PAGE 16
• Presentation resizing for monitors with over scan – Local and received presentation • Possibility to preserve local presentation aspect ratio – Default is stretched • PIP/PAP/POP improved support • EDID version rolled back to 1.3 – Some display drivers do not recognize version 1.4 advertised by XT5000 V3.0. With this version, the recommended resolution is 1080p as expected.
PAGE 17
Contacts Directory Management Enhancements Conference Contacts It is possible to define a “Conference” contact, which includes a set of terminals to invite together in a meeting. This is useful to automatically create meetings that involves the same set of participants and can be recalled with a single click. Note: Conference contacts can always be defined, but a MCU license is needed to place more than a call. Remote LDAP H.
PAGE 18
• GUI: Configure>System Status>Diagnostics>Network > – Status of GLAN1 and GLAN2 Auto negotiation – Ping utility • Web: Diagnostics>Network – Status of GLAN1 and GLAN2 Auto Negotiation – Ping – Trace route RADVISION, an Avaya Company | Release Notes SCOPIA XT4000 and XT5000 Series | 18
PAGE 19
• WEB>Diagnostics>Utilities>Advanced Tools> – NETLOG Capture Start/Stop/Download captured files • TELNET: It is possible to limit remote access to the system by disabling Telnet or changing its password. Telnet welcome screen gives more information about system product and version Upgrading to this Release • When upgrading to this version over a 3.0, the Software Upgrade program displays a warning that a new license is required. The license can be activated either before or after a software upgrade.
PAGE 20
Resolved Issues Version 3.1.0.28 of the SCOPIA XT5000/XT4000 Series includes resolved problems from previous version 3.0.132. • Fixed random resets of systems with LED flashing. PIC firmware had a timeout to recover communications blocks that could be too low in some environmental conditions.
PAGE 21
QC#11261 QC#10972 synthetic image. If privacy is active since beginning of the call, black video is sent. Digital Audio Out is not available Monitor borders adjustment done for graphics are not applied to DVI input or received presentation (received pres to be tested) Audio from HDMI input is not supported If the user set the system with a wrong IP address the system doesn't report a warning to the user QC#10727 IOT issues with Polycom VSX 7000 Rel. 8.7.
PAGE 22
Category Recovery Mode ID QC#11258 QC#11259 QC#11264 QC#16369 I/O Connections QC#16506 QC#13363 QC#2766 QC#2981 QC#2964 QC#6665 QC#5567 IOT QC#16828 QC#17464 QC#17736 QC#17446 QC#16857 QC#11493 QC#18490 RADVISION, an Avaya Company | Release Notes Description Resolution In Recovery mode only HD1 Monitor and GLAN1 can be used HDMI Audio is not available on HD2 monitor Black video is shown when no video input or DVI input is available In random way during Factory default the system can display b
PAGE 23
Category ID Description JIRA#32420 IPOFFICE: embedded 5000: Conference is put on hold when one participant press hold.
PAGE 24
Common Menu Shortcuts • To customize the use of the Remote Control Unit, press together the “Red” and “Green” keys on the Remote Control Unit, then press the relevant digit keys to type a two digit code (from 01 to 99). The default code is 01. The code programmed in the Remote Control Unit must match the setting configured in UI Configure > General> Remote Control Code or in WEB User Settings-> General> Remote Control Code.
PAGE 25
Additional References • For documentation, datasheet, and new software releases about SCOPIA XT5000 Series, visit http://www.radvision.com/Products/Video-Conference-Systems/Conference-RoomSystems/XT5000 • For more information about SCOPIA XT Series Integration with AMX, Crestron and Extron Controllers, visit http://www.radvision.com/Support/Technical-Documentation/SCOPIA-XT1000Series/Controllers.htm • For more information about the complete offering of RADVISION products, visit http://www.radvision.