4 7 T5T215 6m Page 2 Monday, June 3,2002 3:21 BM CONNECTIONS * Your modulator provides four sets of input jacks that can be used to connect up to four home entertainment components, and each set of the input Jacks includes one S-VIDEO jack. it can auto-select the video signals if both S-video and composite signals are received. S-video signals have the highest priority. Connect your antenna or the cable TV's output to ANT IN on the back of the modulator with a 78-ohm F-connector coaxial cable.
Page Monday, fun 3, 2002 3:21 {video / yellow), R {audio right / red), r ¥ and L. {audio left / white) INPUT jacks on the modulator, Plug the connectors on the cable's other end into the video and audio output jacks on the component. Or, you can connect an S-video cable from the S-VIDEO output of a device to an S-VIDEO INPUT jack on the modulator in lieu of A/V cables.
& ® 51215. Page Monday, June 3, 2002 3:21 FM & © wore IY If your TV is an old ona with dark or distorted presentation, side TH TkE ro TRL The impedance switch only affects INPUT 1, | . used for regular broadcasts in your area. . 2. Set the modulator's CHANNEL 3/4 to the same channel you set the TV (30rd). 3. Press the corresponding component selector 1/2/3/4 on the front of the modulator.
a | © T5215. Page § Monday, fume 3, 2002 1:21 PRA designed to provide reasonable ~ f protection against harmful interference . in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful-interference to radio communications.
& ® TET21540 Page 6 Monday, June 3, 2002 3:21 you cannot eliminate the Ne interference, the FCC requires that you stop using your modulator. Changes or modifications not expressly approved by Radio Shack may cause interference and void the user's authority to operate the equipment, This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause hangnail interference. This device complies with Part 15 of the FCC Rules.
Mai m Page 7 Monday, June 3,2002 3:21 PM 4 @ modulator carefully; do not drop it. x Tr Keep the modulator away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. If your modulator is not performing as it shouts, take it to your local Radio Shack store for assistance. Modifying or tampering with the modulator's internal components can cause a malfunction : and might invalidate its warranty and void your FCC authorization to operate it.
1 i & JET Page 8 Monday, Fuse 3, 2002 dle “ i Limited Ninety-Day Warranty “This product is warranted by Radio Shack against manufacturing defects ih material nt workmanship under corral use for finely (30) days from the fete of purchase from Radio Shack company-owned stores at automatized Radio Shack franchisers ord deplores, EXCEPT AS PROVIDED HEREIN, Radio Shack MAKES ND EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED [¥