User's Manual

TM
12-494
User’s Guide
Universal FM Transmitter
Please read this User’s Guide before using your
new transmitter.
2 3 4 5 6 7 8
Package contents
FM Transmitter
2.5mm to 3.5mm Adapter
User’s Guide
Quick Start
Features
Listen to your portable audio device
through your FM radio.
Easily find an interference-free FM
channel with the auto search feature.
Important Safety Information
Connect and operate this product BEFORE
you drive. Attempting to drive and scan for
radio stations at the same time could cause a
traffic accident. Please drive responsibly.
Saving Frequencies
To save the displayed frequency:
1. Hold down 2M until
M1
,
M2
, and
M3
all flash on the display.
2. Hold down 1, 2M, or 3 for two
seconds to save the displayed frequency
to
M1
,
M2
, or
M3
.
Selecting a Saved Frequency
Press 1, 2M or 3 to select a saved
frequency. The display shows
M1
,
M2
, or
M3
and its corresponding frequency.
3 Tune Your Radio
Tune your car’s FM radio to the frequency
displayed on the transmitter.
4 Listen to Your Music
Use the sound controls on your connected
audio device to listen to music. If the sound is
distorted, you can tune your transmitter and
radio to a new frequency.
Specifications
Power ...........................Lighter socket in vehicle
Transmitting frequency .............. 88.1–107.9 MHz
...............................................with 0.2 MHz step
Operating range ..................................10–30 feet
Specifications are subject to change and improvement
without notice. Actual product may vary from the
images found in this document.
FCC Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that
you stop using your FM Transmitter. Changes or modifications not
expressly approved by Ignition L. P. may cause interference and
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
Limited Warranty
Ignition L.P. warrants this product against defects in materials and
workmanship under normal use by the original purchaser for one
(1) year after the date of purchase. IGNITION L.P. MAKES NO
OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by
or attributable to abuse, misuse, failure to follow instructions,
improper installation or maintenance, alteration, accident, Acts of
God (such as floods or lightning), or excess voltage or current; (b)
improper or incorrectly performed repairs by persons who are not
a Ignition L.P. Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) ordinary wear and tear or cosmetic damage;
(e) transportation, shipping or insurance costs; (f) costs of product
removal, installation, set-up service, adjustment or reinstallation;
and (g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the
product and the sales receipt as proof of purchase date to the
place of purchase in the U.S. Ignition L.P. will, at its option, unless
otherwise provided by law: (a) repair the product without charge
for parts and labor; (b) replace the product with the same or a
comparable product; or (c) refund the purchase price. All replaced
parts and products, and products on which a refund is made,
become the property of Ignition L.P. New or reconditioned parts
and products may be used in the performance of warranty service.
Repaired or replaced parts and products are warranted for the
remainder of the original warranty period. You will be charged for
Printed
in China
05A09
12-494 A
© 2009. Ignition L.P. All rights reserved.
Gigaware is a trademark used by Ignition L.P.
repair or replacement of the product made after the expiration of
the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND
CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRA-
TION OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE
NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF
THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH
RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED
DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF
THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME,
DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN
IF IGNITION L.P. HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Some States do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from State to State. You
may contact Ignition L.P. at:
Ignition L.P., 3102 Maple Ave Suite 450, Dallas, TX 75201 02/09
Press any button to
turn the backlight on
for ten seconds.
2 Tune t�e TransmitterTune t�e Transmitter
Interference caused by your car’s antenna,
design, and physical location (such as under
steel bridges and inside parking garages)
can prevent the transmitter from detecting
frequencies and limit sound quality. In these
cases, you may need to select a saved
frequency, autoscan for a clear frequency, or
manually tune a frequency.
Auto-scanning for a Frequency
Hold down Auto Scan to automatically
search for an unused frequency with the least
interference. This may take about 30 seconds.
Manually Tuning a Frequency
1. Hold down 2M until
M1
,
M2
, and
M3
all flash on the display.
2. Press 1or 3 briefly and repeatedly to
find the desired frequency.
3. Wait until the display stops flashing.
2. Insert the stereo plug into the headphone
jack of your portable audio device, such as
a MP3 player or CD player.
nNote: If the plug does not fit, try the
included 2.5mm to 3.5mm adapter.
1 Connect t�e Transmitter
1. Plug the transmitters power plug into
your car’s power outlet. The backlight
turns on and the transmitter displays the
frequency last used.
Protect the environment by recycling used electronics.
Go to E-CyclingCentral.com to find an electronic
recycling center near you.
Auto scan
12-494A_UG_1st draft.indd 1-8 5/7/2009 4:03:54 PM

Summary of content (1 pages)