TM THE PE RFORMANCE YOU NE ED TM Wireless FM Transmitter for iPod® or iPhone® Please read this user’s guide before using your new transmitter.
Package contents FM Transmitter USB Cable User’s Guide Quick Start Features Listen to your iPod/iPhone music through your FM radio. Charge your iPod/iPhone while the music plays. IMPORTANT SAFETY INFORMATION Connect and operate this product BEFORE operating your vehicle. Pay attention to the road. Attempting to drive and operate your transmitter at the same time can cause a serious traffic accident! Please drive responsibly.
2 Tune your transmitter To save frequencies 1. Press + or - to find the desired frequency. 2. Press and hold M until M1 flashes. 3. Press + or - to select the desired memory location then press and hold M to store the memory location. 4. Repeat steps 1-3 to save a frequency in M2 and M3. Select a saved frequency Press M once, M1 and its frequency appear. Press M twice, M2 and its frequency appear. Press M three times, M3 and its frequency appear.
Charge your iPod/iPhone with the Transmitter To charge your iPod/iPhone, connect the supplied USB cable to the transmitter and to your computer or other USB power output device. n Note: The USB port lets you charge iPod/iPhone only. It cannot be used for data transfer. RBDS Transmission RBDS protocol transmits both audio and track information from your iPod/iPhone to your radio receiver.
Use FM Navi 1. Plug the FM transmitter into the iPod/iPhone. 2. Choose a song to play and start playback. The transmitter turns on. 3. Return to your iPhone/iPod’s home screen. Find and tap the FM Navi icon to run the application. n Note: After the transmitter is plugged in, run the FM Navi application or start music playback to turn on the transmitter. If FM Navi is not running, the transmitter turns off 2 minutes after music is paused or stopped.
Store Channel Frequency Touch and hold the frequency shown on the FM Navi display until a white cursor appears, then drag it to the desired memory location to save current frequency. Select a Stored Channel Frequency Tab any of the 3 memory buttons to select frequency. The selected memory is enlarged. Change Background Color 1. Tap the icon to show available background colors. 2. Tap the desired color. 3. Tap a to close. More Information Tap the icon for help.
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
iPod and iPhone are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. This product is not designed, manufactured, sponsored, or endorsed by Apple Computer, Inc. Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. Get more from your audio and video equipment. See what you’ve been missing. With Auvio, you control the experience.