Radioland Beacon FCC ID: 2AGUT-NRF52810 user's guide Shenzhen Radioland Technology CO.,LTD Address:5F,Block A2,ChenTian Hangcheng Industry Zone,XiXiang Town,Bao'an district,Shenzhen,P.R.C Tel:+86-0755-66621530 Email:sales@radioland-china.com Web:www.radioland-china.com http://www.radioland-china.com/ Shenzhen Radioland Technology CO.
Contents 1 product introduction.................................................................................................................3 1.1 Description.....................................................................................................................3 1.2 Main Feature.....................................................................................................................3 1.3 Applications................................................................................
1 product introduction 1.1 Description Our company produces three kinds of Beacon modules, which is a complete low cost for Bluetooth low power applications. The CC2541-iBeacon wireless module is developed with TI high performance wireless SOC chip CC2541. And integrated low power 8051 microcontroller kernel. CC2640-iBeacon wireless module is developed using TI cost-effective ultra-low power chip cc2640.
1.3 Applications Indoor navigation Mobile payment Store shopping guide Flow analysis 1.4 Electrical characteristics Test Conditions:Ta=25℃,VCC=3.3V. CC2541-Beacon CC2640-Beacon nRF51822-Beacon Frequency 2400 - 2483.5Mhz 2400 - 2483.5Mhz 2400 - 2483.5Mhz Flash(KB) 256 256 256/128 1.8 - 3.6V 2.1 - 3.6V Power supply 2.0 - 3.6V Out Power -26 - 0dBm -21 - 5dBm -30 - 4dBm Sensitivtiy -93dBm -97dBm -93dBm TX Current 21.1mA 6.1mA at 0dBm 10.5mA RX Current 19.6mA 5.
2 How to use? 2.1 Module working state (1) After the module is power on, the indicator lights flash 3 times, indicating that the module is in the broadcast state . At this time , the module is in a detectable state , and the mobile phone can search the module . At this time , the module can connect and modify the parameter through our APP. (2) Press the button for three seconds, the module light flash once, and the module enters a low power state.
2.2APP download Android APP download address: https://pan.baidu.com/s/1gfKUoOb access password: hil4. Apple APP can search APP Store for” RL beacon” downloads. http://www.radioland-china.com/ Shenzhen Radioland Technology CO.
2.3APP operation Modification intervals: Input 2-digit hexadecimal number 02 to C8U * 50 = broadcast interval (unit ms) Note: using Apple's app RL Beaconn app operation here is similar 2541 is in an unconnectable state after modification. If you want to view specific parameters, please reboot Example: modify broadcast interval to 500ms 1.Turn on your phone Bluetooth first and open RL Beacon ( drop - down list of beacons ) 2.
So the broadcast interval here is 0A->10*50 = 500ms 4.When the modification is complete, you can view the app link via an oscilloscope or Android APP as follows Link: https://pan.baidu.com/s/1smm4ahJ password: 19a1 Note: the first step is to disconnect the Apple phone from the beacon before the beacon rebroadcasts. Modification of transmit power: Parameters vary from chip to chip, see Appendix 2 Power comparison Table for specific modifications Example:the modified CC2541-Beacon power is -6dBm 1.
Change name: The name that is written can not be greater than 8 bytes (letters, numbers, or underlines) Example : the modification of the 2541-beacon broadcast name is 12345678 1. Modify 1 / 2 step with modified broadcast interval 2. Find the name item, enter the name you want to modify, 12345678, click on the change 3.
1.Modify 1 / 2 step with modified broadcast interval 2.To find the UUID entry, enter the 32 UUIDs that you want to modify, here 32 1s, click on the changes 3.After modification, you can view the changes through Android APP Modify Major Minor and RSS: Major two bytes hexadecimal / minor two bytes hexadecimal / RSSI 1 byte hexadecimal All three values need to be input RSSI, where the default is that the battery power varies with the actual value.
Major :0064(100) Minor :FFFF(65535) RSSI(Power Batter): 34(50) 1. Modify 1 / 2 step with modified broadcast interval 2. Apple app writes (left) and android app writes (right) as shown in the following figure 3. After modification, you can view the write status through android app http://www.radioland-china.com/ Shenzhen Radioland Technology CO.
3.CC254x/nRF52810 /CC2640iBeacon Interface CC254x / nRF52810/CC2640iBeacon use 128bitUUID, through the definition of GATT Service planning a simple communication protocol, users can quickly modify the App parameter to the iBeacon, iBeacon notify the way through the modified feedback to the App.
APP Command Num 1 APP Command Change name: 0x11+name(length<=8) Return The first connectable version reboot 0x11 0x12+16byte UUID takes effect other versions take effect immediately all versions are saved Immediate effect, save power Change UUID: 2 Description 0x12+16byte UUID Eg:0x12 0x11 0x11… 0x99 0x99 |<-- 3 Read UUID:0x13 totle16 --> | 0x13+16byte UUID Immediate effect, save power Major:2byte(eg:0x00 0x0a is10) 4 Change Major,Minor battPower: 0x14+Major+Minor+BattPower 0x14+Major+Minor
4. Module Introduction 4.1 cc2541-Beacon GN VCC DC DD RESE 4.3 nRF52810-Beacon BAT BAT SWDI SWCL http://www.radioland-china.com/ Shenzhen Radioland Technology CO.
Appendix 1 Attributes Factory settings Name 2541:Radioland iBeacon Master-slave mode Slave mode Way of working By default, the system enters the broadcast mode Pass word Authentication Type NO Default broadcast interval 1000ms Default power setting 0dBm Attributes Factory settings Name 2640:Radioland iBeacon Master-slave mode Slave mode Way of working By default, the system enters the broadcast mode Pass word Authentication Type NO Default broadcast interval 1000ms Default power se
Appendix 2 CC2541 Power Comparison Table Power Parament 1m RSSI reference value -23dBm 0x01 -73 -6dBm 0x02 -56 0dBm 0x03 -50 51822 Power Comparison Table 0dBm 0x00 -54 4dBm 0x04 -50 -30dBm 0xD8 -89 -20dBm 0xEC 0xF0 0xF4 0xF8 0xFC CC2640 Power Comparison Table -77 -21dBm 0x01 -75 -18dBm 0x02 -77 -15dBm 0x03 -72 -12dBm 0x04 -73 -9dBm 0x05 -70 -6dBm 0x06 -66 -3dBm 0x07 -68 0dBm 0x08 -65 1dBm 0x09 -63 2dBm 0x10 -57 3dBm 0x11 -59 4dBm 0x12 -54 5dBm
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.