NRF52810-Beacon NRF52810-Beacon Radioland Technology Co.,Ltd. Address: 203,Block A1,ChenTian Hangcheng Industry Zone Xixiang Town,Bao’an district,Shenzhen.
NRF52810-Beacon Web:http://radioland-china.en.alibaba.com Table of Contents 1. product description.................................................................................................... 1 1.1 Overview............................................................................................................. 1 1.2 Application scenario..........................................................................................1 1.3 Technology parameter..............................................
NRF52810-Beacon
NRF52810-Beacon 1. product description 1.1 Overview nRF52810 beacon is a portable iBeacon tag with ultra low power chipset NRF52810 and BLE 5.0 technology . The nRF52810 SoC is a powerful, highly flexible ultra-low power multi-protocol SoC ideal for Bluetooth® low power, ANT and 2.4GHz ultra low power wireless applications. The nRF52810 SoC is built on a 32-bit ARM® CortexTM-M4F CPU with 192kB+24kB RAM.
NRF52810-Beacon 1.3 Technology parameter Item nRF52810 Item nRF52810 Supply voltage 1.7 - 3.6v Stand-by current 1.9uA Frequency 2402-2480MHz Transmission rate 1Mbps Selectable Channel 40 Chip flash 192KB Modulation GFSK Chip RAM 24KB Output Power -20dBm - +4dBm OTA √ Emission current (0dBm) 6mA Antenna form PCB antenna Receiving sensitivity -96dBm Receiving current 4.6mA Communication distance Operating temperature 2. Module introduction 2.
NRF52810-Beacon 3
NRF52810-Beacon 2.2 Module size Part Number Width/ Diameter Thickness A3 X1 X2 Pro X4 30mm 75mm 60mm 58mm 10mm 26mm 18mm 16mm 3. Beacon usage 3.1 Beacon operation Beacon can be used directly with power. If you need to modify the parameters, please download the RLbeacon tool on the App Store. Connect when needed,The default password is 123456.
NRF52810-Beacon 3.
NRF52810-Beacon 3.3 Beacon LED and button description (1)LED will flash 3 times when beacon is powered on. (2)In power on state,the button is turned on for 3 seconds, the LED light flashes once, and the beacon is turned off. In power off state, the button is turned on for 3 seconds LED flashes 3 times, and the beacon is turned on. 4. Beacon data format 4.
NRF52810-Beacon response packet, and the other sensor data is 0. 4. Temperature and humidity data: temperature integer (1byte) + temperature decimal (1byte) + humidity integer (1byte) + humidity decimal (1byte) 5. Three-axis data: three-axis (x/y/z) sign bit (1 is a negative number, 0 is an integer 1 byte), three-axis (x/y/z) integer bits (1 byte), three axes (x/y/z) The first digit after the decimal point (1byte), the third digit after the decimal point (x/y/z) (1byte). 5.
NRF52810-Beacon Power consumption: Quiescent Current:2.8uA Broadcast current:6mA Broadcast time:5ms Broadcast interval:1000ms Sensor operating current:3mA Sensor working time:7.5ms Timer operating current:1mA Timer working time:2.5ms Average current = 2.8ͺ ∗985 כ+6∗ כ5 כ+3∗ כ7.5 כ+1∗ כ2.5כ Use time of 2032 battery = 200∙ כ 0.057758כ 1000כ ≈ 3끠6 8 = 0.
NRF52810-Beacon 6.Upgrade nRF52810 supports over-the-air upgrades. When the beacon encounters an error, it can be upgraded to restore the default settings or update the firmware (provided the beacon can also broadcast). Upgrade requires an upgrade package (please ask for customer service and explain which beacon) and upgrade software (our app does not have an integrated upgrade function, so use Nordic's official software to upgrade). 6.
NRF52810-Beacon 6.3 Keep the beacon close to the phone, keep other beacons away from the phone (too many beacons are easily interfered by the phone), and click on SCAN in the upper right corner of the app to start searching for beacons. If you can't find the beacon, you can set the RSSI to -50 or -60 in the previous step, so that the phone can only search for one beacon. 6.3- 1 6.4 Click CONNECT to connect to the beacon. After connecting the beacon, you need to enter the password quickly.
NRF52810-Beacon 6.4- 1 6.5 The green part TX RX in Figure 6.5-1 will be displayed after setting, otherwise it will be displayed as Unknown Service, so this part of the difference is irrelevant. Click on the red part of Figure 6.5-1 to pop up the password input box. Click on the location in the 6.5-2 marker and select TEXT in the pop-up box. Then enter the password in the horizontal line on the left and click SEND in the lower right corner of the pop-up box to send it.
NRF52810-Beacon 6.5- 1 6.5- 2 6.6 After entering the password, the most important thing is to upgrade. Click on the location in Figure 6.6-1, select Distribution packet (ZIP), then click OK to select the upgrade package in the file manager. At this point, the APP will automatically enter the upgrade page, as shown in Figure 6.6-2. If you need to check the progress of the upgrade, click on the location of 6.6-2, the original name of the beacon will be displayed here.
NRF52810-Beacon 6.6- 1 6.6- 2 6.7 When the upgrade progresses to 100% and then displays as disconnected, it indicates that the upgrade is successful. You can directly disconnect the beacon. You cannot disconnect the beacon during the upgrade process, or the beacon is powered off. If the upgrade progress does not occur, then the wrong upgrade package may be selected. Please retry the upgrade operation.
NRF52810-Beacon https://www.nordicsemi.com/-/media/Software-and-other-downloads/SDKs/nRF5/Binaries/nRF5SDK15209412b96.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.