RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL RC-S2LP-915 Module Datasheet V1.
Radiocontrolli SRL RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 CONTENTS Module Name Information................................................................... 1 Description ........................................................................................... 1 Features ................................................................................................ 2 Antenna Style Selection ....................................................................... 3 Mechanical Drawing .....
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Module Name Information RC ModuleType: - S2LP Chip Type: S2-LP Description RC-S2LP Module is designed based on S2LP. S2-LP is a high performance ultra-low power RF transceiver, intended for RF wireless applications in the sub-1 GHz band. It is designed to operate in both the licensefree ISM and SRD frequency bands at 915.6-925.4 MHz . The S2-LP can be used in systems with channel bandwidth of 53 kHz enabling.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Features • • and retransmission Frequency bands: 915.6-925.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Antenna Style Selection 1.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Mechanical Drawing 15.00mm±0.2 22.00mm+0.8/﹣ 0.
RC-S2LP-915 Module Datasheet V1.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Specifications 1. 915MHz Parameter Min Typ Max Unit Operating Voltage 1.8 - 3.6 Operating Temperature -30 - 85 V ℃ TX - 30 33.7 RX - 8.0 8.7 sleep - - 0.6 uA DR=0.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Soldering Recommendations Peak:240 222 ℃ or highter 1℃ to 2℃/S Pre-heating Zone (3℃ to 6℃) 180℃ 150℃ 70±10S <3.8℃/S 55±10S Soldering Zone Heating time FCC COMPLIANCE Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Regulatory Module Integration Instructions 2.2 List of applicable FCC rules This device complies with part 15.247 of the FCC Rules. According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a mobile device. 2.3 Summarize the specific operational use conditions This module can be used in household electrical appliances as well as lighting equipments.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL 2.8 Label and compliance information The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as: “Contains Transceiver Module FCC ID: 2ANH5--RC-S2LP-915 ”,or “Contains FCC ID: 2ANH5--RC-S2 LP-915 ”, Any similar wording that expresses the same meaning may be used. 2.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL all the applicable individual technical rules as well as to the general conditions of operation in Sections 15.5, 15.15, and 15.29 to not cause interference. The operator of the host product will be obligated to stop operating the device until the interference has been corrected. 2.
RC-S2LP-915 Module Datasheet V1.1 February 27, 2019 Radiocontrolli SRL Operating the host product When testing the host product, all the transceivers must be operating.The transceivers can be enabled by using publicly-available drivers and turned on, so the transceivers are active. In certain conditions it might be appropriate to use a technology-specific call box (test set) where accessory devices or drivers are not available.