User's Manual

SUNDAY SILENCE CB RADIO
OPERATING INSTRUCTIONS
1. Turning power on and off.
a. Press the CB button on the switch panel located on the fuel tank to turn on the
receiver.
b. When the CB button on the switch panel is pressed and held down, a beep is
heard and the power is turned off.
c. Each time the CB button is pressed momentarily, the CB transceiver sound is
switched between the speaker and the headset.
2. Selecting Channel
a. Press the CB-CH handlebar switch upwards or downwards with your thumb to
change channels. When the switch is pressed upwards or downwards
continuously, a beep is heard and channels are changed continuously. There
are a total of 40 channels.
b. Below is a table of CB frequencies and corresponding channel numbers.
CH MHz CH MHz CH MHz CH MHz
1 26.965 11 27.085 21 27.215 31 27.315
2 26.975 12 27.105 22 27.225 31 27.325
3 26.985 13 27.115 23 27.255 33 27.335
4 27.005 14 27.125 24 27.235 34 27.345
5 27.015 15 27.135 25 27.245 35 27.355
6 27.025 16 27.155 26 27.265 36 27.365
7 27.035 17 27.165 27 27.275 37 27.375
8 27.055 18 27.175 28 27.285 38 27.385
9 27.065 19 27.185 29 27.295 39 27.395
10 27.075 20 27.205 30 27.305 40 27.405
3. Adjusting Volume
a. Press the CB-VOL switch upwards or downwards with your thumb to raise or
lower the volume. When the switch is pressed upwards or downwards
continuously, a beep is heard and the volume is raised or lowered
continuously.
b. The display indicates the current CB-VOL in numbers, for example 20.
Maximum volume is 20 and minimum volume is 00. The CB transceiver
volume can be set independently of the other audio system functions.
4. Transmitting
a. Press and hold the TALK switch to start transmission. The other audio
functions are muted during transmission to make sure that communications
with the other party are not drowned out.