PDWM-2600 www.pyleaudio.
PDWM-2600 DUAL UHF WIRELESS MICROPH0NE SYSTEM OPERATION MANUAL Thanks for your support and trust to us while choosing our wireless microphone series with excellent quality. To ensure it functions well, Please read this manual carefully before operation. PDWM-2600 PDWM-2600 DUAL UHF WIRELESS MICROPH0NE SYSTEM RECEIVER UNIT/operation Avoid exposure of the system to rain or moisture. No user-serviceable parts inside the system. Refer all servicing to a qualified technician only.
HANDHELD MICROPHONE/DIAGRAM INSTALLATION To connect the wireless microphone to your amplifier system: Refer to the installation diagram below. UNSCREW BATTERY COVER TO INSERT BATTERY Using the supplied jack-to-jack lead, connect from the AF OUT jack socket to the MICROPHONE INPUT socket on your amplifier. Plug the mains power adapter into a suitable mains socket, and plug the lead connector into the DC 12V input socket.
TROUBLE SHOOTING SPECIFICATIONS Please read and check the following points before asking for service. The wireless microphone fails to work: check the microphone battery by switching the microphone ON, the red LED battery condition indicator should come on for a second and then go off. If the red LED stays on or is dim, replace the battery. If the red LED fails to come on, check the battery polarity or change battery.
