PLATINUM✴ QUALITY RANGE REMOTE CONTROL 6-in-1 URC6D UNIVERSAL ■ For total control of up to 6 pieces of remote IR controlled devices ■ Ideal replacement for lost or broken remote controls ■ Compatible with most brands (see reverse) ■ Features learning technology ■ 1 years warranty ■ Complete with set up instructions Compatible equipment QU AL IT Y M✴ TV DVD VCR CABLE AUDIO/HI-FI SATELLITE LASER DISC & OTHERS PL AT IN U ■ ■ ■ ■ ■ ■ ■ ■
This remote may provide functions that are not available on your equipment. Some functions of your particular equipment (e.g. menu functions) may not be controlled by this remote. In such cases, use the original remote control for your equipment. Please use this manual to become familiar with your Universal Remote. After you are familiar with your remote the first thing you need to do is to install batteries and set up your remote for your particular product and brand.
1. 21 2 3 20 4 19 5 18 6 7 8 9 17 16 15 14 10 11 Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds. Set Up Battery Installation On the back of the remote, push down on the tab and lift the cover off. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. Press the battery cover back into place.
SET UP - Code Identification Feature The Code Identification Feature allows you to identify the three digit library code stored under your device key. For example, if you want to find out what four digit code is stored under your TV device key, follow the six steps below: 1. Press and hold the SET UP button until the red indicator stays on. Release the SET UP button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3.
Volume/Mute Control and Punch-Through Feature This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set (factory default) for all device Modes programmed with “Visual” codes (e.g TV, VCR, DVD, DVR, SAT, & CABLE) and “Audio” codes (e.g CD & AUDIO) to use their own Volume/Mute control if present.
Code Learning The learning feature lets you “learn” functions from your original remote control. For example - you may want to use your remote to operate the RANDOM PLAY feature from your original CD remote control. This remote is equipped with an “easy learning” feature that lets you “learn” features (such as RANDOM PLAY from your original CD remote). Tips on Learning You can only learn one device type under any one Mode button (e.g only learn TV codes under the TV Mode, VCR codes under the VCR Mode, etc.
1. Press and hold the SET UP button until the red indicator turns on, then release the button. 2. Press and release the desired mode button (TV, VCR, etc.), the red indicator blinks then stays on. 3. Press and release the LEARN button, the red indicator blinks then stays on. 4. Press and release the Learning Remote button that you want to teach (e.g. POWER). 5. Point both remotes facing each other by approximately 3 cm apart 6. Press and hold the Original Remote button (e.g.
LIST OF SOME OF THE MOST POPULAR COMPATIBLE BRANDS Complete list of all compatible brands and equipment is included inside TV VCR DVD SATELLITE AUDIO OTHERS Apex Audiovox Benq Citizen Daewoo* Emerson GE Hitachi* JVC* LG (Goldstar)* LXI Magnavox Mitsubishi* NEC* Panasonic Philco Philips* Pioneer* Quasar Radio Shack RCA* Samsung Sanyo* Sony* Toshiba* Zenith Akai Audiovox Broksonic Citizen Daewoo Emerson GE Hitachi JVC LG (Goldstar) Magnavox Mitsubishi NEC Panasonic Philco Philips Pioneer Quasar Radio S