Radicom Research, Inc. Designer’s Guide for RB8762C Series (RoHS BLE 5.
Table of Contents Radicom Research, Inc. ............................................................................................... 1 Table of Contents ..................................................................................................... 2 RB8762C EVK and BLE Functionality .................................................................... 4 Features .................................................................................................................... 5 Approvals ........
Introduction Thank you for choosing Radicom RB8762C Module. We are committed to providing you quality service and technical support. The RB8762C modules are designed to meet OEM’s needs of embedding low power, wireless data connectivity to their products. The RB8762C family offers a quick and simple solution for wireless Bluetooth communications. Radicom RB8762C module is designed to meet the emerging market for Bluetooth 5.1 applications. These embedded Bluetooth 5.
RB8762C EVK and BLE Functionality Radicom provides RB8762C-EVK (development kits) as a quick platform for testing and evaluating the RB8762C and RB8762CHM Bluetooth modules. The kit includes two RB8762C modules mounted on the RB8762CHM DIP Module. Each RB8762CHM is installed into a RB8762CMB evaluation board. One of the RB8762CHM is configured to operate in BLE Data Protocol Master Mode. The other RB8762C-HM is configured to operate in BLE Data Protocol Slave mode.
Features Support the Bluetooth 5.1 core specification Frequency Range 2.402 – 2.
Approvals FCC Certification 47 CFR FCC Part 15.247 & ANSI C63.10 2013 KDB 558074 D01 v03r05 FCC 1.1310 CE Certification EN 300 328 V2.1.1 ETSI EN 301 489‐17 V2.2.1 / ETSI EN 301 489‐1 V1.9.2 EN 61000‐3‐2: 2014 / EN 61000‐3‐3: 2013 EN 55032: 2015 / EN 55024: 2010+A1: 2015 ETSI EN 301 489‐17 V2.2.1 ETSI EN 301 489‐1 V1.9.
Model Naming System Product Series: RB8762C- (x) - (x) Optional a: on-board antenna c: IPEX connector Optional G: with G sensor Blank: without G sensor FCC/CE certified: RB8762C-(a/c)-G RB8762C-(a/c) IC certified: RB8762C RB8762CJF Designer’s Guide (RRD2Z50‐20190314001‐A09‐C2) 7
RB8762C Module Mechanical Dimensions & Pin Definitions Size: Top View Unit: mm[inch] Module= 17.5 x 15.0 x 2.75 mm [0.69” x 0.59” x 0.
RB8762CHM Mechanical Dimensions & Pin Definitions Size: RB8762CHM(w/o pin header)= 30.6 x 28 x 5.6 mm [1.2” x 1.1” x 0.24”] Pin header pitch = 6mm [0.
RB8762CMB Mechanical Dimensions Size: Evaluation Board= 62.6 x 55.1 x 15.0 mm [2.5” x 2.2” x 0.6”] Unit: mm[inch] Top View 2-PH 2.54_2X11P;H=8.4 2-PH 0.10_2X11P;H=0.
RB8762CMB RS232 DB9 Pin Definitions The pin definitions of DB9 used on the RB8762CMB RS232 Serial Connector are as follows: Pin Signal name 1 DCD (Input, Carrier Detect) 2 RXD (Input, Received Data) 3 TXD (Output, Transmit Data) 4 DTR (Output, Data Terminal Ready) 5 GND (Ground) 6 DSR (Input, Data Set Ready) 7 RTS (Output, Request to Send) 8 CTS (Input, Clear to Send) 9 RI (Input, Ring Indicator) RB8762CJF Designer’s Guide (RRD2Z50‐20190314001‐A09‐C2) 11
Layout Design Suggestions General Layout Rules: All Printed Circuit Boards must comply with UL94V0 standard for flammability. Always use RoHS compliant Parts and materials. Suggestions for Layout: Step 1. Do not place Power circuit, X’tal, Inductor, etc. near RF area. Step 2. The bigger Antenna clearance area, the better. The Antenna itself needs to stay away from any circuit or component at least 3mm. Antenna clearance area means Top and Bottom both required to be cleared. Step 3.
RB8762C EVK Development Board Figure and Functions The RB8762CMB Development Board has white silkscreen legend located by the switches and connectors described below. 4 5 6 3 7 8 9 2 10 11 1 12 1. RS232 male DB-9 connector (J32) 2. Rows keys (J14) Row 0 > P1_2 , Row 4 > P1_6 , Row 1 > P1_3 , Row 2 > P1_4 , Row 3 > P1_5 Row 5 > P1_7 3.
5. UART interface header (J3) 6. GPIO interface header (J2) 7. RS232 _ UART header (J17) 8. I2C interface header (J8) 9. USB_UART header (J13) 10. SPI interface header (J4) 11. Power LED indicator 12.
Operating RB8762C MB Introduction: Radicom provides RB8762CMB Development Kit as a quick platform for testing and evaluating the RB8762CHM Bluetooth module. Each RB8762CMB has an UART and USB connector interface. You may choose either UART or USB interface for data transmission. If you use UART interface to transmit your data, please plug one null cable to COM port and insert a 4 pieces jumper into J17 (as below). Also remember to connect USB connector for power supply.
Hardware Set-up - To provide power to the RB8762CMB, plug one end of the USB cable into USB connector on the RB8762CMB. Plug the other end into the PC USB port. PC Set-up - Turn on the PC. To send the AT commands and transmit & receive data with the RB8762CMB use a serial communication package such as Docklight. Set the appropriate COM port for each side with the DTE speed set to 9600 and parity set to 8N1. Docklight setting is as follows: Step 1.
Step 3. After these steps, power on the RB8762CMB and you’ll see device information as below. 1 2 ※Actual version of RB8762CMB and BT device address might be different as above. If you want to know the latest FW version, please contact Radicom.
Supported AT Command List AT Commands Slave Side Master Side Description at √ √ Test UART channel at+laddr √ √ Read BD address at+name √ √ Read device name Set device name(Max. length=16 byte) Default name is “Radicom”. at+name √ √ After changing name, you should use “at+reset\r\n” command and the new name will work. at+baud √ √ Check current Baud rate. Set Baud rate.
AT Commands Slave Side Master Side at+sinq Invalid √ at+conn< Parameter> Invalid √ at+i √ √ at+reset √ √ RB8762CJF Designer’s Guide (RRD2Z50‐20190314001‐A09‐C2) Description Stop searching for BT device. *Must-do step, or master device will keep searching. Connect a slave device. *Input parameter from “AT+INQ”.
AT-Command in Docklight Master EVB Slave EVB Step 1. Enter “at+role=1” to set as master. Step 2. Enter “at+role=0” to set as slave. Step 3. Enter “at+name” to read device name. +Name=Radicom Step 4. Enter “at+laddr” to read BD address. +LADDR=0012A1123456 Step 5. Enter “at+inq”. Get slave’s BD address. OK. At+inq +INQ 0:0X0012A1123456 Step 6. Enter “at+sinq”. Stop the master from searching BT device. +INQE Step 7.
Firmware behavior: The current newest version is V08 and its major different with old versions are: 1. Booting When RB8762C is booting, its role (slave or master) will depend on the setting value. This value can be got by AT command “at+role\r\n” and the factory default value is “2”. 1.1 If the value is “0”, RB8762C will work as a slave. 1.2 If the value is “1”, RB8762C will work as a master. 1.3 If the value is “2”, RB8762C will be decided by GPIO P1_0.
OTA Upgrade Firmware This chapter will show you how to use OTA to upgrade firmware. If the version of target device is larger than V07, please refer section 2. Section 1 Step 1. Plug in USB cable to power on RB8762CMB. Step 2. Follow page18 to setup RB8762CMB with Docklight Step 3. Issue “at+role2” to enter OTA mode(as below) Step 4. Install OTA APP (OTA.apk) in your Android smart phone. Step 5. Upload the latest firmware file into your smart phone.
Step 6. Launch OTA APP and search for “Radicom_OTA” device. Then click the device to enter next step. Step 7. Click “Select File” from APP. Click “UPLOAD”.
Step 8. The firmware upgrade will start immediately. Once the screen shows “Update Success!” means firmware upgrade successfully. Step 9. When new firmware upgraded successfully through OTA, you must return RB8762CMB to its original mode (master/slave). Issue “at+role0” to enter slave mode and “at+role1” to enter master mode.
Section 2 Step 1. Install OTA APP in your smart phone and execute APP. Step 2. Plug in USB cable to power on RB8762CMB. Step 3. After 10 second, APP will scan BT device name. Then click to connect. Step 4. “Select File” Radicom released image to upgrade the slave device then click “UPLOAD” Step 5.
How to access RB8762C from smartphone The RB8762C can support two mainly platform for smartphone (iOS and Android). You can access RB8762C from smartphone by 3rd app or your own designed app. Here we provide some notes for access RB8762C from smartphone, also some examples. ※This chapter assumes that the reader has a basic understanding of the BLE specification including some knowledge of service, characteristic and transfer protocols. 1. BLE support The Android system applies to version 4.
4. Customed APP If you want to build your own BLE APP, please refer to below official documents and examples. Android Documentation https://developer.android.com/guide/topics/connectivity/bluetooth-le.html Example https://github.com/googlesamples/android-BluetoothLeGatt/#readme iOS Documentation https://developer.apple.com/library/content/documentation/NetworkingInternetWeb/Conceptual/Co reBluetooth_concepts/CoreBluetoothOverview/CoreBluetoothOverview.
The wired method upgrades RB8762C firmware code 1. Software platform and software Windows 7 Service Pack 1, BeeMPTool2.0.5, App image: APP_1.1.11894.12638-0d68345b87439211a079cb98bb0 (The app image will change for each release.) 2. Hardware type: 3.
3.1 Wired Connection We will use RB8762CMB to update firmware. In order to do that, we need connect these 5 wires form RB8762C module to RB8762CMB. RB8762CMB is RB8762CEVK without the RB8762CHM Below is the picture of our sample with 5 wires connected.
If your 8762C already soldered in your board and VDD_3V3 provided, please do not connect VDD_3V3. You only need 4 wires (3 signals and Ground) The following procedures can be verified from RB8762CEVK (RB8762CMB + RB8762CHM). The difference is using RB8762CHM into RB8762CMB and the other is Using RB8762C module wired into RB8762CMB. 4. Download image with BeeMPTool2.0.5 4.1 RB8762C EVK 4.1.1 Choose interface We use USB interface to download the image.
4.1.3 Operating Steps: a. P3_0 jumper ON b. Power ON c. Wait for at least 15 seconds d. Burn Image (Steps 4.1.4 to step 9) e. Power OFF f. P3_0 Jumper OFF g. Use Cell phone (Android or iOS) to check Bluetooth device. You can verify the Bluetooth address to identify newly update. 4.1.4 Power on the RB8762CMB with your PC or notebook. 4.1.5 Execute “BeeMPTool2.0.5\BeeMpTool.exe” 4.1.
Step 5: After Click on Set Config file, you can set your BT address of new firmware. You can check BT address after successfully update the firmware (from cellular phone) Step 6: Confirm then close this window Step7: Select "Patch Image" and “APP Image” Step8: Download successfully Step9: Finished and close this window.
Power off RB8762C EVK then power on. The RB8762CEVK will be with the new image. Summary of operating Steps: a. P3_0 jumper ON b. Power ON c. Wait for at least 15 seconds to erase firmware. d. Burn Image (Steps 4.1.4 to Step 9) e. Power OFF f. P3_0 Jumper OFF g. Use Cell phone (Android or iOS) to check Bluetooth device. You can verify the Bluetooth address to identify newly update.
FCC , IC, NCC Label and Model Identification The RB8762C module family is FCC Part 15 and IC (Industry Canada) certified. The RB8762C is a lso CE marked. The modules are labeled with the RB8762C module model number and FCC Part 15 ID, IC registration number and CE mark. The label can be found on top of the metal shielding on the RB8762C Module. Note: Models RB8762CHM will have an additional Product ID label containing the HM model number.
peripheral requirements, etc). IMPORTANT NOTE: In the event that this condition cannot be met then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
Host (End Product) Labeling Requirements To maintain compliance, the end product hosting the module must be properly labeled to identify that this module is installed. The final end product must have a label located in a visible area with the following information: XXXXXXX is for the model of the module used in the end equipment. The XXXXXXX will be RB8762C, RB8762CHM.
FCC RF Radiation Exposure Statement IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any antenna or transmitter. This device contains a low power transmitter. When this device is operational, use only with the supplied, or recommended antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations.
pas produire de brouillage, et (2) l’utilisateur de l’appareil doit acceptor tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.
This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.
CE Declaration of Conformity For the following equipment: Radicom Research, Inc. Bluetooth Module Model(s): RB8762C, RB8762CHM are herewith confirmed to comply with the requirements set out in the Council (European parliament) Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility of Radio and Telecom device (2014/53/EU). For the evaluation regarding this Directive, the following standards were applied: EN 61000-4-2:2010, EN 300 328 V2.1.
Limited Warranty Warranty Coverage and Duration Radicom Research, Inc. (“RRI”) warrants to the original purchaser its RRI-manufactured products (“Product”) against defects in material and workmanship under normal use and service for a period of one year from the date of delivery. During the applicable warranty period, at no charge, RRI will, at its option, either repair, replace or refund the purchase price of this Product, provided it is returned in accordance with the terms of this warranty to RRI.
What this Warranty does NOT Cover: 1. Defects or damage resulting from use of the Product in other than its normal and customary manner. 2. Defects or damage from misuse, accident or neglect. 3. Defects of damage from improper testing, operation, maintenance, installation, alteration, modification or adjustment. 4. Disassembly or repair of the Product in such a manner as to adversely affect performance or prevent adequate inspection and testing to verify any warranty claim. 5.
Contacting Radicom Research If more information or technical support is needed, please contact us: 671 E Brokaw Road San Jose, CA. 95112 USA Telephone: (408) 383 9006 Fax: (408) 383 9007 Mail: sales@radi.com http://www.radi.