Installation and Users Guide Indoor Positioning Installation and Users Guide v1.
Safety and Regulatory Information FCC FCC ID: Q9V-100-A Radianse Indoor Location Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this Device may not cause harmful interference and (2) this Device must accept any interference received, including Interference that may cause undesired operation. Caution! Radianse Inc.
Installation Preparation Prior to installation, the location of all LanPaks needs to be determined. A detailed map of the areas to be covered will be required. These should be in .dwg or .dwx format and provided to Radianse as early as possible. This map will be the basis for determining the positions of the LanPaks throughout your facility. With the initial positions determined a final walkthrough to determine exact locations will be required.
LightPak assignment Equipment: You will use the Data Management Console to assign a LightPak to a piece of equipment. First select the appropriate LightPak from the tree in the Data Management Console. Enter key equipment information (make, model, type, serial number, etc). People The Data Management Console can be used to assign a LightPak to an individual, similar to equipment. In addition, individual assignments can be made using the Assign Tool.