S‐Tag Model ‐ T42‐140 Temperature Monitoring Tag Installation Instructions RadarFind™ Corporation 877‐RadarFind (723‐2734) www.radarfind.
8/25/2010 Radarfind Corporation A-Tag Installation Instructions Page 2 Warnings: It is important to follow all instructions shipped with this product. UNPACKING: After unpacking the unit, examine it for damage that may have occurred in transit. If the equipment has been damaged, do not attempt to install or operate it. File a claim immediately with the carrier stating the extent of the damage, or contact RadarFind customer service for repair or replacement.
Radarfind Corporation A-Tag Installation Instructions 8/25/2010 Contents of standard package: (1) T42‐140 Temperature Monitoring Tag Copyright © RadarFind Corp 2009 Page 3
8/25/2010 Radarfind Corporation A-Tag Installation Instructions Accessories Adhesive Pad for permanent mounting ‐ # 90‐300‐303 Copyright © RadarFind Corp 2009 Page 4
8/25/2010 Radarfind Corporation A-Tag Installation Instructions Page 5 General Guidelines: Temperature monitoring tags have a maximum range of ‐40C to +70c Example Status tag placement Select a standard location in each monitored unit where the tag is not obstructed by metal containers or liquids which may interfere with the tags reporting signals. Placing the tag in the door shelf is a good option if available.
8/25/2010 Radarfind Corporation A-Tag Installation Instructions Page 6 Assigning a Temperature Tag to a device: 1 – NAME ‐ Create or select the correct device. 2 – DESCRIPTION ‐Give the device a Name and Description. 3 – LOCATION ‐Select the correct LocationID for where the device is located. This will display the device in the correct place on the maps.
8/25/2010 Radarfind Corporation A-Tag Installation Instructions Page 7 7 – TRACK EVERY ‐ Set the time periodicity to log the temperature tracking record. This is the periodicity at which the temperature for this device is recorded when the temperature is within the normal range. When the temperature deviates from the normal range as set the temperature will be logged every 5 minutes. 8 – ACTIVATE ALERT‐ Select whether the Alert function for this device is Active or not.
2010 8/25/2 Radarffind Corporatiion A-Tag Insstallation Instrructions Technical Specificatiions: Model T42‐140 ‐ Temperatur T e Monitorin ng Tag DC power: mption: Power consum Communication ns Transmit Powerr Antenna: ons: Communicatio Operating: Packaging: Accessories: Dimensions: Internal sealed lithium battery Average 15uA K 902‐928 MHz FSK +10dBm maxim mum ‐ *nominal* TX T field level is 70d dBµV/m @ 1m Unity gain isotro opic FCC Subpart 15.
8/25/2010 Radarfind Corporation A-Tag Installation Instructions Page 9 Appendix A – Temperature Tag Displays The standard TempView graph displays Device Name, Description, Assigned Location, Current Temperature, and a tool bar for each Active device. (To display InActive devices check the Show Inactive Devices box on the top tool bar.) Name and Location columns are sortable, and filters are available in the top tool bar to filter the devices by Floor or Area.
8/25/2010 Radarfind Corporation A-Tag Installation Instructions Apppendix B ‐ Maintenance Copyright © RadarFind Corp 2009 Page 10