Model T25-122 – Non Status RTLS Tags Installation Instructions RadarFind™ Corporation 877-RadarFind (723-2734) www.radarfind.
Warnings: It is important to follow all instructions shipped with this product. UNPACKING: After unpacking the unit, examine it for damage that may have occurred in transit. If the equipment has been damaged, do not attempt to install or operate it. File a claim immediately with the carrier stating the extent of the damage, or contact RadarFind customer service for repair or replacement. Read and understand all instructions before installing or operating this equipment.
Contents of standard package: (1) Tag, Model T25-122 - Non status (1) 40317 – Adhesive Pad General Guidelines: All tags on an asset type should be of the same type, e.g. all telemetry devices should have a Non-Status Type tags. Select a standard location on each asset type for the tag. Be sure to choose a place where the tag is protected from physical impacts when the device is being used or transported.
Example tag placement The tag location should not interfere with normal use of the asset. For best performance do not place the tag in a location covered with metal, such as inside of a control box or enclosed area under a bed frame. Clean the area on the asset with alcohol to ensure a good bond. Remove white side of the adhesive covering and place on the bottom side of the tag. Remove red backing and apply to asset.
Installation Steps – Attaching tags with adhesive: Step # 1 -Select location for tag and clean area for adhesive with alcohol. Step # 2 - Attach adhesive to tag base with adhesive or straps. Step # 3 – (Assuming that you have already entered your assets - See next page for ADDING assets in the RadarFind database.) Select asset by entering the serial number or asset inventory number.
Selecting either Edit or Add will bring you to the following asset edit screen where you can enter or edit details concerning the asset. The important lines are: 1 – Display Name -The Asset Name 2 – Inventory ID – Your property tag ID number - this number must be unique to all assets. 3 – Type – Select the appropriate asset sub-category from the drop down list If you wish you can also scan a tag ID into the Tag field here as well as the list screen above.
Technical Specifications: Models T25-122 – Non Status RTLS Tag DC power: Power consumption: Communications Transmit Power Antenna: Communications: Operating: Packaging: Accessories: Dimensions: Internal sealed lithium battery Average 15uA 902-928 MHz FSK +8dBm maximum Unity gain isotropic FCC Subpart 15.249 5 to 35º C, 5% to 90% RH, non condensing ABS Plastic (UL Flammability Rating V0) Adhesive pad (1.4”L x 1.4”W x 0.