RackSolutions .com Patent(s) Pending PC Wall Mount Installation Instructions Kit P/N: Wall-Mount-PC info@RackSolutions.com Technical Support & Sales 903.453.
Kit Contents Assembly Hardware: (1) (1) (1) (4) (2) Base Slide Strap Drywall Anchors with Screws Foam Strips PC Wall Mount Installation Instructions Step 1. Determine Location: Select appropriate location on wall. Consider cable routing and length. Step 2. Mark Hole Positions: Hold base in position and mark 4 hole positions with pencil.
Installation Instructions Step 3. Install Drywall Anchor: Install one drywall anchor at each hole mark. Using a #2 Phillips head screwdriver press the anchor into the drywall while turning clockwise until it is seated flush with the wall. Step 4. Attach Mount Base: Attach base to wall using the 4 screws provided. Tighten Securely. Step 5. Attach Foam Strips to Base: Attach sticky back foam strips as shown. If PC width is less than mounting area of base move strips in parallel with outer side of PC.
RackSolutions .com Installation Instructions Step 6. Thread Strap Through Mount: Attach slide to base. Remove male fastener from strap. Thread strap between slide and base through holes as shown. If PC width is less than mounting area of base use nearest strap hole to outer side of PC. Step 7. Attach Strap Fastener: Attach strap fastener and mount PC. Align slide with top of PC and fasten securely with strap. Optional fastener position. Warranty Statement Innovation First, Inc.