AON WIRELESS A/V SURVEILLANCE SYSTEM CCTV-2400 WIRELESS AV TRANSMITTER WIRELESS XV RECEIVER ¥ SWITCHER peseta (EDC
Features : L.High frequency (2.4Ghz ) transmission, less prone to interference 2.Choice B/W or Color CCD camera to transmitted. 3.4 CH transmitter module is built-in, Option to send signals by any of the 4 Channels. 4.4 CH receiving module may receive signals simultaneously from up to 4 cameras. S.Facilitate scale able approach so users can install 1 camera to start whit and upgrade to 4 cameras later on. 6.Receiving module automatically receives new signals as new cameras are added to service. 7.
*B/W or COLOR CCD CAMERA w/ TRANSMITTER : CCD CAMERA BASE TTT TT 1 ANTENNA W/ TRANSMITTER MODULE LENS 1 | CCD CAMERA \ WIRELESS AV TRANSMITTER MIC PHONE @ Cetus-2am MOUNTING BREAKER
#RECEIVER + 4 CH SWITCHER ANTENNA RECEIVER BASE + 4CH SWITCHER WIRELESS AV RECEIVER & SWITCHER MOLDY cH2 KN crs Rena 1% © CCTV; OD 2400TH; FIX CHANNEL LED {| CHANNEL KEY | MUTE KEY SCAN SET KEY] CHANNEL LED SCAN SET LE D— TIMER ADJUST KEY
Video Camera w/Antenna installation Procedure: Selection wm Power Input + Fasten Camera onto the mounting back, Lacking for appropriate place for installation.
Receiver User Manual: 1. This unit is controlled by advanced micro processor. 2. In one-to-one transmission/receiving mode, please follow the steps described in other pages. 3.If more than one camera is installed: « Install each camera respectively according to the camera installation procedure. Set the cameras to channel 2, 3, 4 respectively according to the set up. + Power on receiver and the LED indicator will lit.
Self Diagnosis and Resolution Symptom Possible Cause Resolution Power Off Power is not hocked up Insert power cord to a socket Power on but not operable | Static effect Unplug power cord and re-plug bad in after a few minutes power is not connected properly | Insert power cord to a socket Power is not turned on Turn on the Power key No Picture, No Sound Antenna on the receiver is not Check if the antenna is worn or connected or worn out is not connected properly {Audio/Video wire touch each other Check if t