Product Info

ManualsBrandsRACER ManualsElectronicsIWARM SYSTEM

RACER IWARM SYSTEM : Main information

Our IWARM system is the Electronic part which is mounted into our gloves to make Heated gloves

The system is made off differents parts

- Two electronic modules : Master module (for right hand) and Slave module (for Left Hand).

- 2 heated patch (made wwith Carbon microwire)

- Two 2200 mAh 2S1P LIPO batteries

- 1 LIPO battery charger 8.4V – 2A

Batteries and Charger are already certified. So they are out of the scope of your certification.

The electronic system contains two PCBAs (MASTER Board and SLAVE Board).

MASTER ad SLAVE PCBA are the same design except some components are not mounted on SLAVE PCBA (Slave board has less functions compare to

Master Board)

The system is working as below :

- Both boards communicate by 2.4 GHz radiofrequence

- Master Board send orders to Slave Board which follows instruction to work in same mode as Master Board

Regarding the certification :

- Master Board is the most critical part regarding electronic certification requirement.

- Heating function can only operate when both master and slave PCBA are connected. This is the reason I provide you with Master and Slave …. The aim

is to get certification of the whole system

Summary of content (8 pages)

PAGE 1
RACER IWARM SYSTEM : Main information Our IWARM system is the Electronic part which is mounted into our gloves to make Heated gloves The system is made off differents parts - Two electronic modules : Master module (for right hand) and Slave module (for Left Hand). - 2 heated patch (made wwith Carbon microwire) - Two 2200 mAh 2S1P LIPO batteries - 1 LIPO battery charger 8.4V – 2A Batteries and Charger are already certified. So they are out of the scope of your certification.
PAGE 2
Heated patch to connect to Master PCBA. Slave PCBA (you just have to power it by a 7.
PAGE 3
RACER IWARM SYSTEM : Normal Mode 1. Connect heated patch and Master PCBA 2. Connect Battery on Slave PCBA 3. Connect Battery on Master PCBA => Both LEDs of Master PCBA should light on for 3s (White, Orange, Red depending on the charge of the battery), then switch off. 4. Make a long Press (2s) Button on Master PCBA => LEDs of Master PCBA shoulf blink Blue until connected to SLAVE PCBA, then become fix White (Orange, RED, depending of battery charge). 5.
PAGE 4
RACER IWARM SYSTEM : RF Test Mode 1. Connect Battery on Slave PCBA => SLAVE Module starts automatically in Transmission Mode 2. Connect Battery on Master PCBA => MASTER PCBA lights Green and start RF Communication with SLAVE Module. 3. Make short press to change RF mode : => After each press, the light of the led is changing In Test Mode, the system is working as below.
PAGE 5
RACER – NEW HEATED GLOVES COLECTIONS All IWARMS01 System are going to be mounted in our new collections (several model of gloves).
PAGE 6
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
PAGE 7
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.
PAGE 8
ISED Statement ‐ English: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.