Installation Instructions

Hello
Product Features
Wireless control from your mobile device
Tunable White 2700K-6500K
Wireless remote control
Create custom scenes
Activity Mode
Sensor compatible
SmartShift™ automated circadian schedule
Schedules and automations
Wire directly to Line Voltage, bypass the ballast
Direct Connect LED, No Gateway or Hub required
Catalog Number:
LCBT8-18-48P-8TW-SD-BYP-SS
Model Number:
LCBT8-18-48P-8TW-SD-BYP-SS
Electrical:
Construction:
Lamp Base: G13
18W, 2200lm
120-277Vac
50/60Hz
Lightcloud Blue is a Bluetooth mesh wireless lighting control system that allows
you to control RAB’s various compatible devices. With RAB’s patent-pending
Rapid Provisioning technology, devices can be quickly and easily commissioned
for residential and large commercial applications using the Lightcloud Blue mobile
app. Each device in a system can communicate with any other device, eliminating
the need for a Gateway or Hub and maximizing the control system’s reach.
Retrofit application includes
these items:
Installation Instructions,
LED Lamps,
Luminaire Marking Labels.
Safety Information
installation requires knowledge of luminaires electrical
in luminaires that have the construction features and
dimensions shown in the photographs and/or drawings
exceed the input rating of the luminaire.
• WARNING - To prevent wiring damage or abrasion, do
not expose wiring to edges of sheet metal or other sharp
objects.
lampholders. Note: Shunted lamp holders are found only
"Instant Start" or "I.S." marked on the ballast. This
designation may be in the form of a statement pertaining
to the ballast itself, or may be combined with the marking
for the lamps with which the ballast is intended to be used,
for example F40T12/IS. For more information, contact the
• Not suitable for use with dimmers and sensors unless
• This device is not intended for use with emergency exits.
Safety Information
instructions to control this lamp. This lamp will not operate
properly when connected to a standard (Incandescent)
dimmer or dimming control.
• Do not make or alter any open holes in an enclosure of
wiring or electrical components during kit installation.
• Installers should not disconnect existing wires from
lampholder terminals to make new connections at
lampholder terminals. Instead installers should cut existing
lampholder leads away from the lampholder and make
new electrical connections to lampholder lead wires by
employing applicable connectors.
where the suitability of the combination shall be
determined by authorities having jurisdiction. Product
with the applicable and appropriate electrical codes. The
installation guide does not supersede local or national
regulations for electrical installations.
• Installers should examine all parts that are not intended to
• Only dimmed by wireless control.
Instructions, LED Lamps (Max. 4), Luminaire Marking Labels.
(cont’d)
说明书
尺寸：810x180mm 单面135x180mmm
材质：80g双胶纸
说明书要求正反正反折好
折叠完之后正面是黑色封面，背面是rab logo那面
折好后卷在灯管上 一起装进瓦楞套
正面
背面
Functionality
tcloud Blue products may be performed using the Lightcloud Blue app.
WE’RE HERE TO HELP:
1 (844) LIGHTCLOUD
1 [phone]
[e-mail]
Emergency default
lamps on.
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not
cause harmful interference, and 2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential environ
-
ment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that inter
ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
To comply with the FCC’s RF exposure limits for general population / uncontrolled exposure, this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
to operate this equipment.
客 户 名 称
材 质
审 核
公 差
批 准
客 户 货 号
胡良才 唐放鸣
尺寸：±1MM
纸张定量：±2%
C M Y K
180°剥离强度
更 改 时 间版 本 号 更改描述平 面 设 计
品 名
尺 寸
颜 色
说明书
810x180mm
RAB
80g双胶纸
2022-06-221徐芷馨
≥10N/M
年份每年要变
The rapid reset process must be done by professional electricians qualied
by RAB. Reach out to your RAB sales manager to request a Rapid Reset Tool.
The tool simply needs to be placed directly on the small Lightcloud Blue logo
for 2 seconds. The lamp will ash 3 times, then reset to 100% brightness at
default CCT.
Method 3: Rapid Reset Tool