GateOne Manual GateOne
Contents 1. Configuration and Hardware connections .......................................................... 3 2. Setting for Command and Control ....................................................................... 4 3. Web GUI pages. ...................................................................................................... 8 4. Specifications .......................................................................................................
Safety Precautions Opening the Tri MINI could result in electric shock and may cause severe injury. Warning Connect the equipment frame ground to building ground. Warning Safety Precautions Warning Operating the Tri MINI with antennas in very close proximity facing each other could lead to severe damage to the repeater. Caution RF EXPOSURE INFORMATION A minimum separation distance of 7.
1. Configuration and Hardware connections * Overall configuration ALARM UL Out put MON. LOCAL D L Outpu t M ON. DONOR AN TE NNA SE RV I C E ANTE NN A RE MOT E AC I N 1 1 0 -1 2 5 V a c DC OUT Note DA NGER Pow e r o utle t for c om pa tible e x te rna l de vic e s only R I SK O F EL ECTRI C SHO CK + 1 2 V dc or -1 2 Vd c M A X 2A A LARM UL Out put MO N. LOCAL DL Outpu t M ON.
2. Setting for Command and Control * GateOne operates on a customer provided PC based platform with the following system requirements. Windows® XP Strong recommended 128 MB RAM or more Pentium Ⅲ processor or more keyboard RJ-45 jack Step 1 Open My Network Places. Step 2 Click the “View network connections”.
Step 3 Push the right button of mouse and select the properties. Step 4 Click the properties of TCP/IP.
Step 5 Set the values and OK as the following. Close all windows. Step 6 Open a new explorer window.
Step 7 Type http://192.168.10.1:83 in the address box and press “Enter” key. Step 8 Login with “admin” of ID and “1234” of password and “OK”.
3. Web GUI pages. A. Security page Three logon passwords; Operator, Viewer, and Administrator, can be authorized on the security page. * Logon as Operator: An operator has all authorization of changing, monitoring, and controlling except parameters on the Security page. * Logon as Viewer: Viewer is able to show the information of MODEM box only. * Logon as Administrator: Administrator has all authorization of changing, monitoring, and controlling.
B. Network page a. Cascade Code: Type in the pre-assigned code. Otherw ise, you cannot access system setup. b. Location I nformation: Takes the latitude and longitude, otherw ise you cannot access system setup. [Example] (‘Ν/S’ | ‘Ε/W’) (+|-) ddd.dddddd: (Latitude: N 39.006597 Longitude: W 122.152390) c. Product I nformation: This is for manufacturer used only. Do not change this value. d. NMC Server I P: Do not change the value. Otherwise Remote Access may not work.
C. Modem page The Modem Page shows totally all information related with repeater and other devices.
D. Upload page The newest Web GUI and System firmware are able to be updated on this page.
E. Reboot page Clicking “Reboot System CPU” makes restart up the operating system on the Micro Processor Unit.
F. Logout Click the “Logout” and press the “OK” to exit current logon.
4. Specifications a. Electrical Specification Item Specifications CPU S3c2410A: 16/32-bit RICS NOR Flash: 4M byte NAND Flash: 32M byte SDRAM: 32M byte RJ-45 RJ-45 8port HUB Kyocera M200 DC +12V / Max 1A -10℃ ~ 50℃ -20℃~ 60℃ 95 % Memory Local Craft Port External Repeater port Modem Power supply Operating temperature Storage temperature Humidity Remark Boot Loader, Linux Kernel Ram disk, Application Program IEEE 802.3 10Base-T b.