User's Manual
Table Of Contents
- Compliance
- Specifications
- Contents
- Troubleshooting
- Important Warnings
- Preface
- System Overview
- Uses for the Solution include
- Special Features include
- System Components
- Settings
- Viewing History
- To select a start and end date
- 1. Click Start Date arrow to display the Date Picker.
- 2. Select Start Date from the Date Picker.
- 3. Click End Date arrow to display a second Date Picker.
- 4. Select End Date from the Date Picker.
- 5. The number of records returned by the date range appears in the lower left corner.
- Clear and Export History
- To select a start and end date
- Seeker Installation
- To install the Seeker Software
- 1. Using a sync cable or cradle, connect your Pocket PC to the computer. For additional information, see the documentation that arrived with the Pocket PC.
- 2. Insert the Seeker software and documentation CD into the drive on the computer.
- 3. Double-click My Computer.
- 4. Navigate to the CD drive.
- 5. Double-click setup.exe.
- 6. Follow the instructions on the screen to finish the installation.
- Installing the RF Reader
- To install the Seeker Software
- Using Seeker Software
- To start the Seeker Software
- The Main Window
- Working Offline
- Tag Entry
- To associate a Tag with a resource
- 1. Tap Add. The Add Tag window appears.
- 2. In the Department box, select a Department ID.
- 3. In the Tag box, select a Tag ID.
- 4. In the Resource box, type the name for this resource.
- 5. In the Description box, type a description for this resource.
- 6. Next to the Image field, tap the ellipses (…) box to link an image to the entry.
- 7. Select the bitmap to be used to represent the resource.
- 8. Tap OK, to save the Tag/resource association.
- Find Tags
- Low Battery Indicator
- Department ID
- To erase a Tag
- To write to a blank Tag
- To find a Tag using Department and Tag
- To find a Tag using Resource and Locations
- 1. In the Resource box, select the Resource associated with the Tag.
- 2. If applicable, select the Location from the Location box. The Locations are downloaded from the PinPoint Configurator Service.
- 3. Select the Beep checkbox, to hear the Tag beep. Select the Light checkbox to see the Tag flash.
- 4. Move the Range slider to the right to increase the range.
- 5. Click Find to start searching for Tags
- Progress Bar
- Tag Count
- Working Online
- Mobile Locating Solution
- User Guide
- Mounting Seeker Tags
- To apply the adhesive pad to the Tag
- To attach a Tag to a resource using an adhesive pad
- 1. Obtain the resource to which you want to apply the Tag. The resource surface should be clean, dry and free of condensed moisture.
- 2. Remove the adhesive plastic guard.
- 3. Firmly attach the Tag to the resource. Ideal application temperature range is 70˚F to 100˚F (21˚C to 38˚C).
- 4. Press firmly and hold for a couple of minutes to activate the pressure sensitive adhesive.
- To edit a Tag/resource association
- 1. In the Tag Entry list, select an item to edit.
- 2. Tap Edit.
- 3. In the Resource box, type the name for this resource.
- 4. In the Description box, type a description for this resource.
- 5. Next to the Image field, tap the ellipses (…) box to link an image to the entry.
- 6. Select the bitmap to be used to represent the resource.
- 7. Tap OK, to save the changes.
- To delete a Tag/resource association
- To clean a Seeker Tag after use
- Mounting Seeker Tags
Mobile Locating Solution
User Guide
User Guide
P/N: 0510-0216-B_Draft 3
Released: 1/16/06
Users must read this guide before using the product.
3125 N. 126th St.
Brookfield, WI 53005 USA
PH: (800) 669-9946 or (262) 790-1771
www.rft.com
info@rft.com