User Manual

1). Daily target can be set by
APP for :
-Skips
-Carlories Burnt
-Time Duration
2). Once daily target set by APP, device
will keep track of daily skips /carlories
burnt/ time duration and display on the
LCD the progress of reaching the target
as follows: (example below using 1000
skips per day set as target)
3). The above display result will be cleared to 0 at 00:00
every day.
4). In case the target is set/changed by the APP in the
middle of the day, the number of skips /carlories burnt/
time duration already accumulated in that day will be
immediately counted into the target reaching progress.
BLE Rope Jumping-BT007
BT007-EN IM REV2（420 x 70mm )
1、纸张：１2７克双铜
2、两色 / 双面印刷
3、按红色虚线折叠，要求折好后，两个渐变色的页面分别为表面和底面。
正面
背面
-If there is no button pressed for 3 minutes, LCD will be off.
-In power down mode, the LCD can be re-activated by pushing
the button once or activated by skipping sensed. Display will
show present day number of skips.
DAILY NO. OF SKIPS
：
Display daily number of skips
resetting at 00:00
DAILY CALORIES
：
updated every 10s during skipping
DAILY FAT BURNT
：
updated every 10s during skipping
DAILY SKIPPING DURATION
：
Display daily duration
of skipping resetting at 00:00
-Press to change between different mode.
-Press and hold to start Bluetooth connection /
disconnect Bluetooth.
Feature
1
LCD & Handle
2
Target Setting
5
Battery Replacement
6
Adjust the length of the rope
7
1). Remove the battery cover.
2). Remove the old battery and insert new AAA battery
（2pcs）.
3). Close the battery cover.
QUICK START GUIDE
DAILY SKIPS
→
DAILY CALORIES
→
DAILY
FAT BURNT
→
DAILY SKIPPING DURATION
→
AVERAGE SPEED
→
TIME
Display
3
Read more >>>
1). Download and install [MyWay Fit] ，
open the APP:
2). In Homepage, click [Rope Jumping] .
3). Select and click the [Settings]
page. Then, Settings
→
Connection
→
Rope Jumping and display the right:
4). When power on reset or press [Reset]
key, LCD full segment display on for 2s,
then show version no. for 2s.
MyWay Fit
-In any mode, press and hold the [Mode] key over 2s to turn
on/off the Bluetooth connection.
-When the Bluetooth is connected, the skip counting will still
work for skips count, calories, fat burnt, activity time, speed….
-The past 14 days records + present day record will be stored
for DAILY SKIPS, DAILY SKIPPING DURATION
.
Bluetooth Connection Mode
4
5). Press [Mode] key > 2s to start Bluetooth connection for
device activation：
6). If mobile phone have found the device, it will show on the
mobile phone (named : BT007xxxx), click this device name
on the mobile phone for pairing and connection.
7). If connection is successful, show as below:
8). Then, time and date is synchronized with phone to activate
the device. Once activated, device will enter Daily Skips mode.
No. of skips
Calories
TargetAverage speed
Skipping
duration
Fat burnt
No. of skips
Calories
Target
Average speed
Skipping duration
Fat burnt
Home
Setting
History
Rope Jumping
8 7 7
850
Kcal
10
g
Calories
Fat burned
32
skips/min
00:45
Speed
Time
Rope Jumping
60000
Target
Reset
Mode Key
LCD Display
ResetBuzzer
1 2 3
Skips
Carlories Burnt
Time Duration
No Target
Please select the type of training
you would like to do?
Back
Target
Target
Rope Jumping
Connection
Bluetooth Smart
®
Rope Jumping
Back
Device
Scanning
Forget Device
Save
BT007xxxx
paired
Connected
Settings
Password Lock Off
Profile
Activity & Sleep Tacker
Heart Rate Monitor
Rope Jumping
Connection
About
Upgrade APP
Connect us
Help / Information
Password
ON
5). Beeping sound will be in the format of 2 beeps in first
half second, and silent in second half second, continuing
under button is pressed. Upon button pressed, the target
bars will stop flashing and beeping alarm will be stopped,
the result will not be reset until the time reaches 00:00.
Adjust method of rope for new user:
Stamp one side by foot, and lift the
other end to your armpit. you could
adjust the rope length flexibly
according to your skill.
You could adjust the length of the rope by yourself, and
fasten the rope by turning around the rolling head.
Compatibility:
Required iOS 6 or above
Compatibility:
Required Android 4.3 or above
Bluetooth 4.0
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
375C00
专色：PANTONE 375 C (绿色)