User's Manual

ManualsBrandsR.E.A.C ELECTRONIC ManualsElectronicsBluetooth Activity Checker

How to wear it

Bluetooth 4.0

Daily Steps

Daily Travel time

Daily Distance

Daily Calories burnt

Battery level shown

on OLED

Daily Sleep data

14 days data record for

main unit

Battery level shown the

battery level in APP

when synchronizing

every time.

Clock (built in RTC) with

yy/mm/dd

Clear sensor memories

by APP.

Device Daily RangeFeatures Key and (OLED version)

BTOO5 IM 正面 ( 210 x 297mm )

BTOO5 IM 背面 ( 210 x 297mm )

OPERATION MANUAL

BT 4.0 Activity & Sleep Tracker - BT005

Step 0 – 350,000 steps

Step Distance 0 – 500.0km or 0 – 500.0miles

Travel Time 00:00 – 24:00 (hr:mm)

Calories 0 – 50000 kcal

Age 5-99

Weight 30 – 136kg (66lb – 300 lb)

Height 100 cm – 200cm (39 inches –

79 inches)

Stride length 30 cm – 150cm (12 inches –

59 inches)

BT 4.0 Step

DistanceTravel time

Avg. speed

Press the key to clear

all setting, and restore

to default setting, The

functions of the device

are disabled until

activating the device.

Reset

Battery

level

Sleep data

Calories

Reset

Clip it

Bag it

Wear the wrist

band at night

to track your

sleep

1 key (Standalone version, OLED Version)

-Press once to interchange the display mode.

-Press and hold 2 second to enter sleep tracker mode.

-In sleep tracker mode, press and hold 2 seconds to exit sleep tracker mode.

OLED display : all display will be shown on the OLED, no LED.

Display Step, Distance, Calories, Activity Time,

Average Speed, Average Pace.Edit Target step,

step distance, and calories.

History mode can show Daily, Weekly, Monthly,

Yearly and Total. History Chart can show Weekly,

Monthly, Yearly.

Daily summary mode

Display Start sleep time, Stop

sleep time, Time in bed, Asleep

time, Disrupted, Efficiency.

History mode History chart

Display history --- Daily, Weekly and Monthly

Graph history display --- Weekly, Monthly, Yearly.

History mode

Pedometer

Home Trip SettingSleep Tracker Heart Rate

99999

Steps

88.8

Week of -- 01/04/2013

Step

Distance

45000

kcal

Calories

Activity time

00:30:00

Total Daily Weekly Monthly Yearly

Last update: 03/04/2013

03/04/2013 Wed

Sleep tracker

Home Trip SettingSleep Tracker Heart Rate

97%

Efficiency

Your Daily Summary

97%

7h 30m

Asleep / Resting

17m

22:00

03/04/2013

05:30

04/04/2013

Disrupted

Likely Awake

13m

Start time

Time in bed

End time

EfficiencyAsleep / Resting Disrupted

94%

5h 21m

5h 36m

05/04/2013

15m

Time in bed

98%

6h 02m

6h 10m

04/04/2013

Time in bed

97%

7h 17m

7h 30m

03/04/2013

13m

Time in bed

95%

5h 30m

5h 46m

02/04/2013

16m

Time in bed

Daily Weekly Monthly

Home Trip SettingSleep Tracker Heart Rate

Week of -- 01/04/2013

Sleep tracker

Asleep time Sleep Efficiency

01/04 02/04 03/04 04/04 05 /04 06/04 07/04

100

0 0

%hr

Weekly Monthly

Home Trip SettingSleep Tracker Heart Rate

Week of -- 01/04/2013

Sleep tracker

Daily summary mode

9999

Steps

Step

20000

Last update: 03/04/2013

03/04/2013 Wed

45%

8.8

Distance

75%

4000

00:30:00

kcal

Calories

10000

45%

Pedometer

Home Trip SettingSleep Tracker Heart Rate

Activity time

km/hr

History chart

5000

4000

3000

2000

1000

29/03 30/03 31/03 01/04 02/04 03/04 04/04

step

5000

4000

3000

2000

1000

kcal

Weekly Monthly Yearly

Pedometer

Home Trip SettingSleep Tracker Heart Rate

Week of -- 01/04/2013

Step Calories

Activity time

500

400

300

200

100

29/03 30/03 31/03 01/04 02/04 03/04 04/04

Weekly Monthly Yearly

Pedometer

Home Trip SettingSleep Tracker Heart Rate

Week of -- 01/04/2013

Distance

Pedometer

- To update the data, click on the APP to update the data.

Sleep tracker

- To update the data, click on the APP to update the data.

Micro USB charging

It is strongly advised to upload your data every 5~7 days, to maintain the completeness of monitoring.

AVG. Speed

MyWay Fit

To synchronize the data, it must to be

connected between device and mobile

Phone.

1.) In pedometer mode, press the key to

Bluetooth connection mode, “Disconnect”

will be shown.

2.) Press and hold key 2 seconds to enable

Bluetooth connection. OLED display will be

shown “Connecting” below:

3.) To check the mobile phone bluetooth

status whether is on. (Settings Bluetooth

select bluetooth on)

4.) Open the APP

5.) In Home mode, click Trip or Sleep tracker

to enter corresponding pages.

6.) To update the data, click on the APP

to update the data.

7.) Press button on the pedometer once

to exit the Bluetooth mode, representing the

device is working in the pedometer mode.

Synchronizing the data

Pocket it

OLED Display

Low battery indicator

1.) In order to save the power, OLED display will be only displayed on for 3 seconds.

2.) If the OLED is off, press key to wake the OLED on for 3 seconds.

Note : The function of key should be valid when there is OLED display.

Battery Charging

1.) When plug in the USB for charging, the OLED will be shown battery charging symbol until unplug

the USB power. (Charging diagram like iphone charging direction.)

Note : During charging, the function must work properly.

-When there is low battery, it will display 1s low battey icon when press key

from OLED wake up. Then, enter to previous corresponding stage.

It is strongly advised to charge every 5~7 days, to maintain the completeness of monitoring.

Forget Device

Clear Memory

Updating the customer setting

After Bluetooth connection, the user can set

the personal setting in profile page (Setting

Profile)

After setting the personal information,

press Update icon to update the information

to tracker.

Clear the stored data inside App

In profile page, press CLEAR PROFILE to

clear the stored data inside APP.

Unpaired internal memory

Press Forget Device can be unpaired the

paired activity & sleep tracker. The user

can pair the new tracker again.

Profile

Settings

Gender Female

Age

Height cm

kgWeight

cmStride

Unit

160

CLEAR PROFILE

Male

Metric English

Name

User

CLEAR PROFILE

Update

Clear internal memory

After Bluetooth connected is connected,

press Clear Memory icon inside APP can

clear all data store inside activity & sleep

tracker.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

A.）Activate the pedometer

B.）Normal Operation (Step count mode)

1.) In the pedometer mode, press the button to

interchange the OLED display mode.

2.) The display mode sequence is shown below:

Daily Step Daily Distance Daily time travel Daily Calories burnt RTC BT Connection

C.) Sleep Tracker mode

1.) In any mode (except BT connection mode),

press and hold key 2 seconds to enter the sleep

tracer mode.

OLED display will be shown below:

2.) A count up timer will start to count the sleep

in bed time.

3.) When wake up, press and hold the key 2

seconds to stop the sleep tracker count, the sleep

record will be stored into memory.

4.) When exit the sleep tracker mode, it will

return to step count mode.

Note : During sleep tracking mode, pedometer

function will be disabled. There is no tracking

function for the beginning 5 minutes.

D.) Bluetooth Connection

1.) In pedometer mode, press the key to

Bluetooth connection mode, “Disconnect” will

be shown.

2.) Press and hold key 2 seconds to enable

Bluetooth connection. OLED display will be

shown “Connecting” below:

3.) When connected, OLED will be shown

“Connected” below.

Note : During “Connecting” or “Connected”

mode, press the key to disconnect the

connection, and then return to pedometer

mode.

App Store

Available on the

For iPhone 4S/5 or above

To update the data,

click the icon to

update the data.

Last update: 03/04/2013

03/04/2013 Wed

Sleep tracker

Home Trip SettingSleep Tracker Heart Rate

97%

Efficiency

Your Daily Summary

97%

7h 30m

Asleep / Resting

17m

22:00

03/04/2013

05:30

04/04/2013

Disrupted

Likely Awake

13m

Start time

Time in bed

End time

9999

Steps

Step

20000

Last update: 03/04/2013

03/04/2013 Wed

45%

8.8

Distance

75%

4000

00:30:00

kcal

Calories

10000

45%

Pedometer

Home Trip SettingSleep Tracker Heart Rate

Activity time

km/hr

AVG. Speed

MyWay Fit

1.) In pedometer mode, press the key to

Bluetooth connection mode, “Disconnect”

will be shown.

2.) Press and hold key 2 seconds to enable

Bluetooth connection. OLED display will be

shown “Connecting” below:

3.) To check the mobile phone bluetooth

status whether is on. (Settings Bluetooth

select bluetooth on)

4.) Open the APP

5.) In Home mode, click Trip or Sleep tracker

to enter corresponding pages.

6.) In Home mode, click Trip or Sleep tracker

to enter corresponding pages.

7.) Select and click the “Settings” page. Then,

Settings Connection Activity and sleep

tracker and display the right:

8.) If mobile Phone have found the device, it

will show on the mobile Phone (named : BT005),

click this device name on the mobile phone for

pairing and connection.

9.) If connection is successful, the device shown

below:

If it is the first time to use, it need to

activate the device.

Connection

Bluetooth Smart

Activity & Sleep tracker

Back

Device

Scanning

Forget Device Clear Memory

Settings

Password Lock Off

Profile

Activity & Sleep Tacker

Heart Rate Monitor

Bike Meter

Connection

About

Upgrade APP

Connect us

Help / Information

Password

BT001 2B49

Disconnect

Connection

Bluetooth Smart

Activity & Sleep tracker

Back

Device

Scanning

Forget Device Clear Memory

BT001 2B49

Connected

Detected, not paired

paired

MyWay Fit