Quuppa Q17 Quuppa Locator Installation Guide and Safety Information v.1.1 11.1.
Revision History Version number 1.0 1.
Contents 1. For your safety 5 2. Introduction 5 3. Parts 6 3.1. Quuppa Q17 main unit 7 3.2. Quuppa Q17 mounting bracket 8 3.3. Quuppa Q17 connector cover 8 4. Safety Information 5. Using the Quuppa Q17 5.1. Installation 9 10 10 Install mounting bracket to the ceiling 10 Install the Quuppa Q17 main unit to the mounting bracket 11 5.2. Connect to power supply 12 Option 1: Use Power over Ethernet (PoE) 12 Option 2: Use separate 5V DC Micro USB 12 5.3.
/19 Quuppa Q17 Installation Guide and Safety Information Quuppa Oy, Keilaranta 1, 02150 Espoo, Finland © 2018 Quuppa Oy
1. For your safety Read these guidelines. Not following them may be dangerous or illegal. Read the complete installation guide for further information. In case of any questions, please contact support@quuppa.com.
3. Parts The Quuppa Q17 contains the following parts: 1. Quuppa Q17 main unit 2. Quuppa Q17 mounting bracket 3.
3.1. 1. 2. 3. 4. 5. 6.
3.2. 1. 2. 3. 4. 5. Quuppa Q17 mounting bracket Orientation indicator and orientation guideline Installation guide VESA standard 75mm x 50mm and 50mm x 50mm Cable passage Locking mechanism 3.3. Quuppa Q17 connector cover 1. Cable channel 2. Locking mechanics 3.
4. Safety Information Observe the following safety guidelines when installing Quuppa Q17. ● Only a qualified service technician should install or service Quuppa Q17 using the approved original Quuppa parts supplied in the sales package. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to Quuppa Q17.
5. Using the Quuppa Q17 5.1. Installation Quuppa Q17 should be mounted clear of any metal obstructions (such air-conditioning ducts, large ceiling trusses, building superstructures) to the side or front of the enclosure. In case needed, use a rigid conduit to lower the Quuppa Q17 away from these obstructions. Install mounting bracket to the ceiling The installation begins with the installation of the mounting bracket. The mounting bracket has several holes for mounting screws.
Install the Quuppa Q17 main unit to the mounting bracket 1. Attach the Ethernet cable and the Micro USB cable if that is used. 2. You may use the connector cover to protect the connector area from dust and dirt. 3. Align Quuppa Q17 main unit with the bracket by ensuring the installation guide in the mounting bracket is aligned with the indicator light on the Quuppa Q17 main unit (1). 4. Lift Quuppa Q17 main unit so that the bracket goes into the bracket mounting channel (1). 5.
5.2. Connect to power supply Option 1: Use Power over Ethernet (PoE) Quuppa Q17 supports the use of standard IEEE 802.3at PoE (Power over Ethernet) components, e.g. PoE switch or power injector, as its power source. Only use standard certified PoE devices. When using PoE, a separate DC power supply is not required. Option 2: Use separate 5V DC Micro USB If you are not using PoE components, connect Quuppa Q17 to 5V power supply with Micro USB. Only use compatible power supplies.
6. Product Information 6.1. Q17 Mechanical Details Q17 dimensions Picture 5: Dimensions, side view Picture 6: Dimensions, top view 6.2.
Item Description Dimensions Locator main unit Ø: 170 mm, h: 31 mm Dimensions Locator mounting bracket Ø: 126 mm, h: 10 mm Weight 390 g IP protection class No Operating temp. range 0°C...+60°C Storage temp. range –10°C...
Please note the storage temperature when storing the Q17. Please note that the device is sensitive to ESD and may be damaged by it. Do not store the Q17 in a humid environment. 6.4. Care and maintenance Your Quuppa Q17 is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. ● ● ● ● ● ● 7. Do not attempt to open the device. Keep Quuppa Q17 dry.
Item Description Radio Positioning radio Radio transmission Bi-directional Number of channels 81 channels (1 MHz), only one at a time Carrier frequencies 2401 2402 … 2480 2481 MHz Modulation GFSK Max Output Power 2.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
● Consult the dealer or an experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by Quuppa could void the user's authority to operate the equipment. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
9. Japan (MIC) Regulatory Model Certified Number Q17 020-XXXXXX (the certification number will be included here) The Quuppa Q17 is approved for use in the Japanese market. 10. CE Regulatory The Q17 has been tested for compliance with relevant standards for the EU market. A copy of the Declaration of Conformity can be found at: www.quuppa.com/support. 11. Bluetooth SIG Qualification (TO BE COMPLETED - qualification information will be included here) 12.